| 11. |
- Cantono, Giada, et al.
(författare)
-
Laser-driven proton acceleration from ultrathin foils with nanoholes
- 2021
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322 .- 2045-2322. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- Structured solid targets are widely investigated to increase the energy absorption of high-power laser pulses so as to achieve efficient ion acceleration. Here we report the first experimental study of the maximum energy of proton beams accelerated from sub-micrometric foils perforated with holes of nanometric size. By showing the lack of energy enhancement in comparison to standard flat foils, our results suggest that the high contrast routinely achieved with a double plasma mirror does not prevent damaging of the nanostructures prior to the main interaction. Particle-in-cell simulations support that even a short scale length plasma, formed in the last hundreds of femtoseconds before the peak of an ultrashort laser pulse, fills the holes and hinders enhanced electron heating. Our findings reinforce the need for improved laser contrast, as well as for accurate control and diagnostics of on-target plasma formation.
|
|
| 12. |
|
|
| 13. |
- Carroll, David C., et al.
(författare)
-
Dynamic control and enhancement of laser-accelerated protons using multiple laser pulses
- 2009
-
Ingår i: Comptes Rendus. Physique. - : Elsevier BV. - 1631-0705. ; 10:2-3, s. 188-196
-
Tidskriftsartikel (refereegranskat)abstract
- The use of schemes involving multiple laser pulses to enhance and control the properties of beams of protons accelerated in ultra-intense laser irradiation of planar foil targets is discussed. Specifically, the schemes include the use of a second laser pulse to produce and control preplasma expansion of the target to enhance energy coupling to the proton beam; the use of a second laser pulse to drive shock deformation of the target to change the direction of the proton beam; and a scheme involving dual high intensity laser pulses to change the properties of the sheath field, with the aim of modifying the proton energy spectrum. An overview of our recent experimental and theoretical results is given. The overall aim of this work is to determine the extent to which the properties of the sheath-accelerated proton beam can be optically controlled, to enable beam delivery at high repetition rates. To cite this article: D.C. Carroll et al., C. R. Physique 10 (2009). (C) 2009 Academie des sciences. Published by Elsevier Masson SAS. All rights reserved.
|
|
| 14. |
- Cassou, K., et al.
(författare)
-
Optimization toward a high-average-brightness soft-x-ray laser pumped at grazing incidence
- 2007
-
Ingår i: Optics Letters. - 0146-9592. ; 32:2, s. 139-141
-
Tidskriftsartikel (refereegranskat)abstract
- We report the near-field imaging characterization of a 10 Hz Ni-like 18.9 nm molybdenum soft-x-ray laser pumped in a grazing incidence pumping (GRIP) geometry with a table-top laser driver. We investigate the effect of varying the GRIP angle on the spatial behavior of the soft-x-ray laser source. After multiparameter optimization, we were able to find conditions to generate routinely a high-repetition-rate soft-x-ray laser with an energy level of up to 3 mu J/pulse and to 6 x 10(17) photons/s/mm(2)/mrad(2)/(0.1% bandwidth) average brightness and 1 x 10(28) photons/s/mm(2)/mrad(2)/(0.1% bandwidth) peak brightness. (c) 2006 Optical Society of America.
|
|
| 15. |
- Dalui, Malay, et al.
(författare)
-
Influence of micromachined targets on laser accelerated proton beam profiles
- 2018
-
Ingår i: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 0741-3335 .- 1361-6587. ; 60:3
-
Tidskriftsartikel (refereegranskat)abstract
- High intensity laser-driven proton acceleration from micromachined targets is studied experimentally in the target-normal-sheath-acceleration regime. Conical pits are created on the front surface of flat aluminium foils of initial thickness 12.5 and 3 μm using series of low energy pulses (0.5-2.5 μJ). Proton acceleration from such micromachined targets is compared with flat foils of equivalent thickness at a laser intensity of 7 ×1019 W cm-2. The maximum proton energy obtained from targets machined from 12.5 μm thick foils is found to be slightly lower than that of flat foils of equivalent remaining thickness, and the angular divergence of the proton beam is observed to increase as the depth of the pit approaches the foil thickness. Targets machined from 3 μm thick foils, on the other hand, show evidence of increasing the maximum proton energy when the depths of the structures are small. Furthermore, shallow pits on 3 μm thick foils are found to be efficient in reducing the proton beam divergence by a factor of up to three compared to that obtained from flat foils, while maintaining the maximum proton energy.
|
|
| 16. |
- Desforges, F. G., et al.
(författare)
-
Reproducibility of electron beams from laser wakefield acceleration in capillary tubes
- 2014
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002. ; 740, s. 54-59
-
Tidskriftsartikel (refereegranskat)abstract
- The stability of accelerated electron beams produced by self injection of plasma electrons into the wakefield driven by a laser pulse guided inside capillary tubes is analyzed statistically in relation to laser and plasma parameters, and compared to results obtained in a gas jet. The analysis shows that reproducible electron beams are achieved with a charge of 66 pC +/- 11%, a FWHM beam divergence of 9 mrad +/- 14%, a maximum energy of 120 MeV +/- 10% and pointing fluctuations of 2.3 mrad using 10 mm long, 178 mu m diameter capillary tubes at an electron density of (10.0 +/- 1.5) x 10(18) cm(-3). Active stabilization of the laser pointing was used and laser parameters were recorded on each shot. Although the shot-to-shot laser energy fluctuations can account for a fraction of the electrons fluctuations, gas density fluctuations are suspected to be a more important source of instability. (C) 2013 Elsevier B.V. All rights reserved.
|
|
| 17. |
- Frasinski, L. J, et al.
(författare)
-
Multielectron Dissociative Ionization of Co2 In Intense Laser Fields
- 1994
-
Ingår i: Journal of Physics B: Atomic, Molecular and Optical Physics. - : IOP Publishing. - 0953-4075 .- 1361-6455. ; 27:6, s. 97-109
-
Tidskriftsartikel (refereegranskat)abstract
- The multiphoton ionization of CO2 has been studied using a laser of 794 nm WaVelength and focused intensities in the region of 10(16) W cm-2. The kinetic energy distributions and ion yields obtained using time-of-flight spectroscopy coupled with covariance mapping can be interpreted most simply in terms of charge-symmetric fragmentation, the strongest channel being O2+ + C2+ + O2+. These results are compared with two recent experiments on CO2, one using an intense laser at 248 nm, the other using Si8+ ion projectiles of 3 MeV u-1 energy.
|
|
| 18. |
- Gaarde, Mette, et al.
(författare)
-
High-order tunable sum and difference frequency mixing in the xuv region
- 1996
-
Ingår i: Journal of Physics B: Atomic, Molecular and Optical Physics. - : IOP Publishing. - 0953-4075 .- 1361-6455. ; 29:5
-
Tidskriftsartikel (refereegranskat)abstract
- We present a study of tunable high-order sum and difference frequency mixing in the 7-70 eV range, in xenon, argon and neon. We mix the light from a terawatt, subpicosecond titanium-sapphire laser and that from a tunable optical parametric generator. The radiation generated through mixing processes involves absorption or emission of one or Mo photons from the weak tunable source. The relative strengths of the sum and difference frequency processes depend strongly on the wavelength range of the generated radiation. The sum frequency processes are stronger at low photon energies in xenon, whereas the difference frequency processes dominate at high photon energies, in neon, being almost comparable to harmonic generation.
|
|
| 19. |
- Genoud, Guillaume, et al.
(författare)
-
Active control of the pointing of a multi-terawatt laser.
- 2011
-
Ingår i: Review of Scientific Instruments. - : AIP Publishing. - 1089-7623 .- 0034-6748. ; 82:3
-
Tidskriftsartikel (refereegranskat)abstract
- The beam pointing of a multi-terawatt laser wave laser is stabilized on a millisecond time scale using an active control system. Two piezo mirrors, two position sensing detectors, and a computer based optimization program ensure that both near- and far-field are stable, even during single shot operation. A standard deviation for the distribution of laser shots of 2.6 μ rad is achieved.
|
|
| 20. |
- Genoud, Guillaume, et al.
(författare)
-
Increasing energy coupling into plasma waves by tailoring the laser radial focal spot distribution in a laser wakefield accelerator
- 2013
-
Ingår i: Physics of Plasmas. - : AIP Publishing. - 1070-664X .- 1089-7674. ; 20:6
-
Tidskriftsartikel (refereegranskat)abstract
- By controlling the focal spot quality with a deformable mirror, we are able to show that increasing the fraction of pulse energy contained within the central part of the focal spot, while keeping the total energy and central spot size constant, significantly increases the amount of energy transferred to the wakefield: Our measurements show that the laser loses significantly more laser energy and undergoes greater redshifting and that more charge is produced in the accelerated beam. Three dimensional particle in cell simulations performed with accurate representations of the measured focal spot intensity distribution confirm that energy in the wings of the focal spot is effectively wasted. Even though self-focusing occurs, energy in the wings of the focal spot distribution is not coupled into the wakefield, emphasising the vital importance of high quality focal spot profiles in experiments. (C) 2013 AIP Publishing LLC.
|
|
