| 31. |
- Cervin, Nicholas Tchang, et al.
(författare)
-
Strong, Water-Durable, and Wet-Resilient Cellulose Nanofibril-Stabilized Foams from Oven Drying
- 2016
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 8:18, s. 11682-11689
-
Tidskriftsartikel (refereegranskat)abstract
- Porous materials from cellulose nanofibrils (CNFs) have been prepared using Pickering foams from aqueous dispersions. Stable wet foams were first produced using surface-modified CNFs as stabilizing particles. To better maintain the homogeneous pore structure of the foam after drying, the foams were dried in an oven on a liquid-filled porous ceramic frit. The cell structure was studied by scanning electron microscopy and liquid porosimetry, the mechanical properties were studied by compression testing, and the liquid absorption capacity was determined both with liquid porosimetry and by soaking in water. By controlling the charge density of the CNFs, it was possible to prepare dry foams with different densities, the lowest density being 6 kg m(-3), that is, a porosity of 99.6%. For a foam with a density of 200 kg m(-3) the compressive Young's modulus was 50 MPa and the energy absorption to 70% strain was 2.3 MJ M-3. The use of chemically modified CNFs made it possible to prepare cross-linked foams with water-durable and wet-resilient properties. These foams absorbed liquid up to 34 times their own weight and were able to release this liquid under compression and to reabsorb the same amount when the pressure was released.
|
|
| 32. |
- Cervin, Nicholas Tchang, et al.
(författare)
-
Ultra porous nanocellulose aerogels as separation medium for mixtures of oil/water liquids
- 2012
-
Ingår i: Cellulose. - : Springer Science and Business Media LLC. - 0969-0239 .- 1572-882X. ; 19:2, s. 401-410
-
Tidskriftsartikel (refereegranskat)abstract
- A novel type of sponge-like material for the separation of mixed oil and water liquids has been prepared by the vapour deposition of hydrophobic silanes on ultra-porous nanocellulose aerogels. To achieve this, a highly porous (> 99%) nanocellulose aerogel with high structural flexibility and robustness is first formed by freeze-drying an aqueous dispersion of the nanocellulose. The density, pore size distribution and wetting properties of the aerogel can be tuned by selecting the concentration of the nanocellulose dispersion before freeze-drying. The hydrophobic light- weight aerogels are almost instantly filled with the oil phase when selectively absorbing oil from water, with a capacity to absorb up to 45 times their own weight in oil. The oil can also be drained from the aerogel and the aerogel can then be reused for a second absorption cycle.
|
|
| 33. |
|
|
| 34. |
- Erlandsson, Johan
(författare)
-
CONTROLLED ASSEMBLY AND FUNCTIONALISATION OF CELLULOSE-BASED MATERIALS
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The environmental effects caused by the use of fossil-based resources have intensified and driven society and research towards new materials and processes that utilise renewable resources. Within the development of new materials, wood has been identified as a raw-material from which high performing materials can be derived. One such material is cellulose nanofibrils (CNFs) which are capable of replacing several currently used fossil-based materials. However, for CNFs to exhibit the required material properties they need to be chemically or physically modified. This means that the properties of the CNFs can be specifically adapted to fit the demand in particular areas, for example electrical energy storage. In these applications it is the mechanical properties; the large, easily functionalised surface and ability to be moulded into 3D shapes that make CNFs a highly interesting raw material.This thesis explores the formation and functionalisation of CNF- and fibre-based materials and their novel use in applications such as energy storage. The wet stability of the materials was achieved by crosslinking and ice templating the fibrils by a novel freezing procedure, which makes it possible to avoid the use of freeze-drying and subsequent crosslinking. Using colloidal probe atomic force microscopy adhesion measurements, hemiacetals were shown to be formed between the aldehyde-containing fibrils when they are brought into molecular contact, for example during ice templating. Hemiacetal crosslinked aerogels have been shaped and functionalised to demonstrate their application as biomimetic structural composites, electrical circuits and electrical cells. In addition, crosslinked, light-weight 3D fibre networks were prepared with á similar chemistry by a self-assembly process of pulp fibres. These networks could be dried under ambient conditions and the materials formed were wet-stable due to the hemiacetal crosslinks formed in the fibre–fibre contacts, which provided the networks with excellent mechanical properties and shape recovery capacity in water.Finally, using a newly developed polyampholyte and mixing it with CNFs, heterofunctional composite films and aerogels could be prepared. By activating crosslinkable groups in these composite materials, they were able to undergo further water based chemical functionalisation. In this highly dispersed state, the composite could be irreversibly crosslinked by a hydrothermal treatment to create transparent, low solid content hydrogels.
|
|
| 35. |
- Erlandsson, Johan, et al.
(författare)
-
Macro- and mesoporous nanocellulose beads for use in energy storage devices
- 2016
-
Ingår i: APPLIED MATERIALS TODAY. - : Elsevier. - 2352-9407. ; 5, s. 246-254
-
Tidskriftsartikel (refereegranskat)abstract
- Chemically cross-linked, wet-stable cellulose nanofibril (CNF) aerogel beads were fabricated using a novel procedure. The procedure facilitated controlled production of millimetre-sized CNF aerogel beads without freeze-drying or critical point drying, while still retaining a highly porous structure with low density. The aerogel beads were mechanically robust in the dry state, supporting loads of 1.3 N at 70% compression, even after being soaked in water and re-dried. Furthermore, they displayed both a good stability in water and a remarkably good shape recovery after wet compression. Owing to the stability in water, the entire surface of the highly porous aerogel beads could be successfully functionalized with polyelectrolytes and carboxyl-functionalized single-wall carbon nanotubes (CF-SWCNTs) using the Layer-by-Layer technique, introducing a significant electrical conductivity (1.6 mS/cm) to the aerogel beads. The functionalized, electrically conducting aerogel beads could carry as much as 2 kA/cm(2) and act as electrodes in a supercapacitor displaying a stabilized charge storage capacity of 9.8 F/g after 50 charging-discharging cycles.
|
|
| 36. |
- Erlandsson, Johan, et al.
(författare)
-
On the mechanism behind freezing-induced chemical crosslinking in ice-templated cellulose nanofibril aerogels
- 2018
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 6:40, s. 19371-19380
-
Tidskriftsartikel (refereegranskat)abstract
- The underlying mechanism related to freezing-induced crosslinking of aldehyde-containing cellulose nanofibrils (CNFs) has been investigated, and the critical parameters behind this process have been identified. The aldehydes introduced by periodate oxidation allows for formation of hemiacetal bonds between the CNFs provided the fibrils are in sufficiently close contact before the water is removed. This is achieved during the freezing process where the cellulose components are initially separated, and the growth of ice crystals forces the CNFs to come into contact in the thin lamellae between the ice crystals. The crosslinked 3-D structure of the CNFs can subsequently be dried under ambient conditions after solvent exchange and still maintain a remarkably low density of 35 kg m-3, i.e. a porosity greater than 98%. A lower critical amount of aldehydes, 0.6 mmol g-1, was found necessary in order to generate a crosslinked 3-D CNF structure of sufficient strength not to collapse during the ambient drying. The chemical stability of the 3-D structure can be further enhanced by converting the hemiacetals to acetals by treatment with an alcohol under acidic conditions.
|
|
| 37. |
- Fall, Andreas, et al.
(författare)
-
Spinning of Stiff and Conductive Filaments from Cellulose Nanofibrils and PEDOT:PSS Nanocomplexes
- 2022
-
Ingår i: ACS Applied Polymer Materials. - : American Chemical Society (ACS). - 2637-6105. ; 4:6, s. 4119-4130
-
Tidskriftsartikel (refereegranskat)abstract
- Research in smart textiles is growing due to the increased demand from the healthcare sector and people's urge to keep track of and analyze the signals and metrics from their bodies. Electrically conductive filaments are the most fundamental material for smart textiles. These filaments can be imbued with functionalities and useful in fields like energy storage, sensing, and actuation. To be able to meet the requirements that the latter applications require, fabrication techniques must be developed to provide better processability and sustainability in a cost-effective manner. Here, a mixture of a conductive polymer, poly(3,4-ethylenedioxythiophene) (PEDOT), and biobased cellulose nanofibrils (CNFs) was used to spin filaments utilizing a water-based process. These filaments show electrical conductivities up to 150 S/cm and tensile stiffness of 20 GPa. Interestingly, the PEDOT aligned to a similar degree as the CNFs during the spinning process without a drawing step, which is hypothesized to be caused by the attachment of PEDOT on the CNFs. Lastly, the filaments were tested in an organic electrochemical transistor (OECT) configuration, which resulted in a working device with an on/off ratio approaching 1500. Furthermore, the OECT exhibited stable behavior when changing temperature (20-80 °C) and relative humidity (40-80%). This aqueous spinning method, resulting in filaments with robust electronic properties in different temperature and humidity environments, show greats promise for future innovative smart textiles.
|
|
| 38. |
|
|
| 39. |
- Francon, Hugo, et al.
(författare)
-
Ambient-Dried, 3D-Printable and Electrically Conducting Cellulose Nanofiber Aerogels by Inclusion of Functional Polymers
- 2020
-
Ingår i: Advanced Functional Materials. - : Wiley-VCH Verlag. - 1616-301X .- 1616-3028.
-
Tidskriftsartikel (refereegranskat)abstract
- This study presents a novel, green, and efficient way of preparing crosslinked aerogels from cellulose nanofibers (CNFs) and alginate using non-covalent chemistry. This new process can ultimately facilitate the fast, continuous, and large-scale production of porous, light-weight materials as it does not require freeze-drying, supercritical CO2 drying, or any environmentally harmful crosslinking chemistries. The reported preparation procedure relies solely on the successive freezing, solvent-exchange, and ambient drying of composite CNF-alginate gels. The presented findings suggest that a highly-porous structure can be preserved throughout the process by simply controlling the ionic strength of the gel. Aerogels with tunable densities (23–38 kg m−3) and compressive moduli (97–275 kPa) can be prepared by using different CNF concentrations. These low-density networks have a unique combination of formability (using molding or 3D-printing) and wet-stability (when ion exchanged to calcium ions). To demonstrate their use in advanced wet applications, the printed aerogels are functionalized with very high loadings of conducting poly(3,4-ethylenedioxythiophene):tosylate (PEDOT:TOS) polymer by using a novel in situ polymerization approach. In-depth material characterization reveals that these aerogels have the potential to be used in not only energy storage applications (specific capacitance of 78 F g−1), but also as mechanical-strain and humidity sensors. © 2020 The Authors.
|
|
| 40. |
|
|
