| 1. |
- Sun, Wenjun, 1989, et al.
(författare)
-
An alternating D-A1-D-A2 copolymer containing two electron-deficient moieties for efficient polymer solar cells
- 2013
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 1:37, s. 11141-11144
-
Tidskriftsartikel (refereegranskat)abstract
- Unlike normal donor-acceptor (D-A) polymers containing only one electron-deficient segment in their repeating unit, the incorporation of two electron-deficient moieties with different absorption behaviors, forming a D-A1-D-A2 internal structure in the alternating copolymer, showed a broader absorption spectrum than its constituent parts and enhanced photovoltaic performance. This work is anticipated to open the door to the design of new low bandgap polymers with a broader absorption range for efficient polymer solar cells.
|
|
| 2. |
-
Biomedical materials and diagnostic devices
- 2012
-
Samlingsverk (redaktörskap) (övrigt vetenskapligt/konstnärligt)abstract
- "The functional materials with the most promising outlook have the ability to precisely adjust the biological phenomenon in a controlled mode. Engineering of advanced bio- materials has found striking applications in used for biomedical and diagnostic device applications, such as cell separation, stem-cell, drug delivery, hyperthermia, automated DNA extraction, gene targeting, resonance imaging, biosensors, tissue engineering and organ regeneration"--Provided by publisher.
|
|
| 3. |
- Mazzotta, Francesco, 1985, et al.
(författare)
-
Nanoplasmonic biosensing with on-chip electrical detection
- 2010
-
Ingår i: Biosensors and Bioelectronics. - : Elsevier BV. - 0956-5663 .- 1873-4235. ; 26:4, s. 1131-1136
-
Konferensbidrag (refereegranskat)abstract
- A nanoplasmonic biosensor chip with integrated electrical detection is presented. The concept is based on the local refractive index sensitivity of nanoplasmonic gold nanodisks (110 nm in diameter and 20 nm in height) that are fabricated, through a parallel method, directly on an array of silicon solar cells or photoactive diodes. The nanoplasmonic properties of the sensor chip were investigated both optically and electrically, with excellent agreement between the two. We show that local changes in the refractive index of the surrounding environment gives changes in the nanoplasmonic properties of the gold nanodisks, which induce corresponding changes in the photocurrent at single wavelengths of the nanoplasmonic solar cells. With a simple light-emitting diode as light source, and together with a material-specific modification protocol, the photocurrent output of the nanoplasmonic sensor chip was successfully used to monitor a specific biorecognition reaction in real-time.
|
|
| 4. |
- Stålhand, Jonas, et al.
(författare)
-
A mechanochemical 3D continuum model for smooth muscle contraction under finite strains
- 2011
-
Ingår i: Journal of Theoretical Biology. - : Elsevier BV. - 0022-5193 .- 1095-8541. ; 268:1, s. 120-130
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents a modelling framework in which the mechanochemical properties of smooth muscle cells may be studied. The activation of smooth muscles is considered in a three-dimensional continuum model which is key to realistically capture the function of hollow organs such as blood vessels. On the basis of a general thermodynamical framework the mechanical and chemical phases are specialized in order to quantify the coupled mechanochemical process. A free-energy function is proposed as the sum of a mechanical energy stored in the passive tissue, a coupling between the mechanical and chemical kinetics and an energy related purely to the chemical kinetics and the calcium ion concentration. For the chemical phase it is shown that the cross-bridge model of Hai and Murphy [1988. Am. J. Physiol. Cell Physiol. 254, C99–C106] is included in the developed evolution law as a special case. In order to show the specific features and the potential of the proposed continuum model a uniaxial extension test of a tissue strip is analysed in detail and the related kinematics and stress–stretch relations are derived. Parameter studies point to coupling phenomena; in particular the tissue response is analysed in terms of the calcium ion level. The model for smooth muscle contraction may significantly contribute to current modelling efforts of smooth muscle tissue responses.
|
|
| 5. |
- Alvors, Per, et al.
(författare)
-
Research and development challenges for Swedish biofuel actors – three illustrative examples : Improvement potential discussed in the context of Well-to-Tank analyses
- 2010
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Currently biofuels have strong political support, both in the EU and Sweden. The EU has, for example, set a target for the use of renewable fuels in the transportation sector stating that all EU member states should use 10% renewable fuels for transport by 2020. Fulfilling this ambition will lead to an enormous market for biofuels during the coming decade. To avoid increasing production of biofuels based on agriculture crops that require considerable use of arable area, focus is now to move towards more advanced second generation (2G) biofuels that can be produced from biomass feedstocks associated with a more efficient land use.Climate benefits and greenhouse gas (GHG) balances are aspects often discussed in conjunction with sustainability and biofuels. The total GHG emissions associated with production and usage of biofuels depend on the entire fuel production chain, mainly the agriculture or forestry feedstock systems and the manufacturing process. To compare different biofuel production pathways it is essential to conduct an environmental assessment using the well-to-tank (WTT) analysis methodology.In Sweden the conditions for biomass production are favourable and we have promising second generation biofuels technologies that are currently in the demonstration phase. In this study we have chosen to focus on cellulose based ethanol, methane from gasification of solid wood as well as DME from gasification of black liquor, with the purpose of identifying research and development potentials that may result in improvements in the WTT emission values. The main objective of this study is thus to identify research and development challenges for Swedish biofuel actors based on literature studies as well as discussions with the the researchers themselves. We have also discussed improvement potentials for the agriculture and forestry part of the WTT chain. The aim of this study is to, in the context of WTT analyses, (i) increase knowledge about the complexity of biofuel production, (ii) identify and discuss improvement potentials, regarding energy efficiency and GHG emissions, for three biofuel production cases, as well as (iii) identify and discuss improvement potentials regarding biomass supply, including agriculture/forestry. The scope of the study is limited to discussing the technologies, system aspects and climate impacts associated with the production stage. Aspects such as the influence on biodiversity and other environmental and social parameters fall beyond the scope of this study.We find that improvement potentials for emissions reductions within the agriculture/forestry part of the WTT chain include changing the use of diesel to low-CO2-emitting fuels, changing to more fuel-efficient tractors, more efficient cultivation and manufacture of fertilizers (commercial nitrogen fertilizer can be produced in plants which have nitrous oxide gas cleaning) as well as improved fertilization strategies (more precise nitrogen application during the cropping season). Furthermore, the cultivation of annual feedstock crops could be avoided on land rich in carbon, such as peat soils and new agriculture systems could be introduced that lower the demand for ploughing and harrowing. Other options for improving the WTT emission values includes introducing new types of crops, such as wheat with higher content of starch or willow with a higher content of cellulose.From the case study on lignocellulosic ethanol we find that 2G ethanol, with co-production of biogas, electricity, heat and/or wood pellet, has a promising role to play in the development of sustainable biofuel production systems. Depending on available raw materials, heat sinks, demand for biogas as vehicle fuel and existing 1G ethanol plants suitable for integration, 2G ethanol production systems may be designed differently to optimize the economic conditions and maximize profitability. However, the complexity connected to the development of the most optimal production systems require improved knowledge and involvement of several actors from different competence areas, such as chemical and biochemical engineering, process design and integration and energy and environmental systems analysis, which may be a potential barrier.Three important results from the lignocellulosic ethanol study are: (i) the production systems could be far more complex and intelligently designed than previous studies show, (ii) the potential improvements consist of a large number of combinations of process integration options wich partly depends on specific local conditions, (iii) the environmental performance of individual systems may vary significantly due to systems design and local conditons.From the case study on gasification of solid biomass for the production of biomethane we find that one of the main advantages of this technology is its high efficiency in respect to converting biomass into fuels for transport. For future research we see a need for improvements within the gas up-grading section, including gas cleaning and gas conditioning, to obtain a more efficient process. A major challenge is to remove the tar before the methanation reaction.Three important results from the biomethane study are: (i) it is important not to crack the methane already produced in the syngas, which indicates a need for improved catalysts for selective tar cracking, (ii) there is a need for new gas separation techniques to facilitate the use of air oxidation agent instead of oxygen in the gasifier, and (iii) there is a need for testing the integrated process under realistic conditions, both at atmospheric and pressurized conditions.From the case study on black liquor gasification for the production of DME we find that the process has many advantages compared to other biofuel production options, such as the fact that black liquor is already partially processed and exists in a pumpable, liquid form, and that the process is pressurised and tightly integrated with the pulp mill, which enhances fuel production efficiency. However, to achieve commercial status, some challenges still remain, such as demonstrating that materials and plant equipment meet the high availability required when scaling up to industrial size in the pulp mill, and also proving that the plant can operate according to calculated heat and material balances. Three important results from the DME study are: (i) that modern chemical pulp mills, having a potential surplus of energy, could become important suppliers of renewable fuels for transport, (ii) there is a need to demonstrate that renewable DME/methanol will be proven to function in large scale, and (iii) there is still potential for technology improvements and enhanced energy integration.Although quantitative improvement potentials are given in the three biofuel production cases, it is not obvious how these potentials would affect WTT values, since the biofuel production processes are complex and changing one parameter impacts other parameters. The improvement potentials are therefore discussed qualitatively. From the entire study we have come to agree on the following common conclusions: (i) research and development in Sweden within the three studied 2G biofuel production technologies is extensive, (ii) in general, the processes, within the three cases, work well at pilot and demonstration scale and are now in a phase to be proven in large scale, (iii) there is still room for improvement although some processes have been known for decades, (iv) the biofuel production processes are complex and site specific and process improvements need to be seen and judged from a broad systems perspective (both within the production plant as well as in the entire well-to-tank perspective), and (v) the three studied biofuel production systems are complementary technologies. Futher, the process of conducting this study is worth mentioning as a result itself, i.e. that many different actors within the field have proven their ability and willingness to contribute to a common report, and that the cooperation climate was very positive and bodes well for possible future collaboration within the framework of the f3 center.Finally, judging from the political ambitions it is clear that the demand for renewable fuels will significantly increase during the coming decade. This will most likely result in opportunities for a range of biofuel options. The studied biofuel options all represent 2G biofuels and they can all be part of the solution to meet the increased renewable fuel demand.
|
|
| 6. |
- Gustafsson, David, et al.
(författare)
-
Influence of high temperature hold times on the fatigue crack propagation in Inconel 718
- 2011
-
Ingår i: International Journal of Fatigue. - : Elsevier. - 0142-1123 .- 1879-3452. ; 33:11, s. 1461-1469
-
Tidskriftsartikel (refereegranskat)abstract
- High temperature fatigue crack growth in Inconel 718 has been studied at the temperatures 450 degrees C, 500 degrees C, 550 degrees C and 650 degrees C. The tests were conducted both without hold times and with hold times of different lengths and with a mix of both. Focus has been on quantifying the effect the hold time has upon the crack growth rate and how much it damages the material. Furthermore, it has been investigated how this damage influences the actual cracking behavior, i.e. where in the loading cycle the damage contributes most to the crack growth. This damage is related to the concept of a damaged zone in front of the crack tip. The size of the damaged zone has been derived from the tests and a microscopy study to confirm the findings has also been carried out. It is found that the concept of a damaged zone can be a successful explanatory model for the observed crack growth behavior under high temperature hold time.
|
|
| 7. |
- Bleser, Gabriele, et al.
(författare)
-
A personalized exercise trainer for the elderly
- 2013
-
Ingår i: Journal of Ambient Intelligence and Smart Environments. - 1876-1364 .- 1876-1372. ; 5:6, s. 547-562
-
Tidskriftsartikel (refereegranskat)abstract
- Regular and moderate physical activity practice provides many physiological benefits. It reduces the risk of disease outcomes and is the basis for proper rehabilitation after a severe disease. Aerobic activity and strength exercises are strongly recommended in order to maintain autonomy with ageing. Balanced activity of both types is important, especially to the elderly population. Several methods have been proposed to monitor aerobic activities. However, no appropriate method is available for controlling more complex parameters of strength exercises. Within this context, the present article introduces a personalized, home-based strength exercise trainer designed for the elderly. The system guides a user at home through a personalized exercise program. Using a network of wearable sensors the user's motions are captured. These are evaluated by comparing them to prescribed exercises, taking both exercise load and technique into account. Moreover, the evaluation results are immediately translated into appropriate feedback to the user in order to assist the correct exercise execution. Besides the direct feedback, a major novelty of the system is its generic personalization by means of a supervised teach-in phase, where the program is performed once under supervision of a physical activity specialist. This teach-in phase allows the system to record and learn the correct execution of exercises for the individual user and to provide personalized monitoring. The user-driven design process, the system development and its underlying activity monitoring methodology are described. Moreover, technical evaluation results as well as results concerning the usability of the system for ageing people are presented. The latter has been assessed in a clinical study with thirty participants of 60 years or older, some of them showing usual diseases or functional limitations observed in elderly population.
|
|
| 8. |
- Chen, Jingjing, 1982, et al.
(författare)
-
10 Gbps 16QAM transmission over a 70/80 GHz (E-band) radio test-bed
- 2012
-
Ingår i: European Microwave Week 2012: "Space for Microwaves", EuMW 2012, Conference Proceedings - 7th European Microwave Integrated Circuits Conference, EuMIC 2012. - : IEEE. - 9782874870286 - 9781467323024 - 9782874870262 ; , s. 556-559
-
Konferensbidrag (refereegranskat)abstract
- A millimeter-wave radio test-bed is implemented which demonstrates 16QAM transmission over 70/80 GHz band for data rate up to 10 Gbps. Performance of the 16QAM transmitter and receiver is evaluated in a loop-back lab set-up. With the proposed 10 Gbps on single carrier system architecture, it is possible to achieve 40 Gbps over a 5 GHz bandwidth when combined with polarization and spatial multiplexing.
|
|
| 9. |
- Hellman, Pasi, et al.
(författare)
-
Development of Quality Management Systems : How Have Disruptive Technological Innovations in Quality Management Affected Organizations?
- 2013
-
Ingår i: Quality Innovation Prosperity. - : Quality Innovation Prosperity. - 1335-1745 .- 1338-984X. ; 17:1, s. 104-119
-
Tidskriftsartikel (refereegranskat)abstract
- This research investigates the history of quality and development of quality management systems. History of quality is investigated from Hammurabi’s law all the way to today’s reigning quality initiatives including ISO, Six Sigma and Lean manufacturing. In the last chapters the current state of quality management is being examined. The foresight method is also opened up and examined. The Innovator’s dilemma concept, originally presented by Clayton Christensen, is used to analyse how quality management systems have been evolved in the last 100 years. Special emphasis is placed on the US manufacturing in the 1970s and 1980s. Based on the literature, the concept of Innovator’s dilemma and the fall of US manufacturing are merged. The result is a prime example that the Innovator’s Dilemma is a universal phenomenon. The industry leader is trying to maintain its position and do everything right but still it is destined to fail. The causes and effects are being discussed in later chapters.
|
|
| 10. |
- Nilsson, Emil, et al.
(författare)
-
Ultra Low Power Wake-Up Radio Using Envelope Detector and Transmission Line Voltage Transformer
- 2013
-
Ingår i: IEEE Journal on Emerging and Selected Topics in Circuits and Systems. - : Institute of Electrical and Electronics Engineers (IEEE). - 2156-3357 .- 2156-3365. ; 3:1, s. 5-12
-
Tidskriftsartikel (refereegranskat)abstract
- An ultra-low power wake-up radio receiver using no oscillators is described. The radio utilizes an envelope detector followed by a baseband amplifier and is fabricated in a 130-nm complementary metal-oxide-semiconductor process. The receiver is preceded by a passive radio-frequency voltage transformer, also providing 50 Omega antenna matching, fabricated as transmission lines on the FR4 chip carrier. A sensitivity of -47 dBm with 200 kb/s on-off keying modulation is measured at a current consumption of 2.3 mu A from a 1 V supply. No trimming is used. The receiver accepts a dBm continuous wave blocking signal, or modulated blockers 6 dB below the sensitivity limit, with no loss of sensitivity.
|
|
