| 1. |
- Admassie, Shimelis, et al.
(författare)
-
Biopolymer hybrid electrodes for scalable electricity storage
- 2016
-
Ingår i: Materials Horizons. - : ROYAL SOC CHEMISTRY. - 2051-6347 .- 2051-6355. ; 3:3, s. 174-185
-
Forskningsöversikt (refereegranskat)abstract
- Powering the future, while maintaining a cleaner environment and a strong socioeconomic growth, is going to be one of the biggest challenges faced by mankind in the 21st century. The first step in overcoming the challenge for a sustainable future is to use energy more efficiently so that the demand for fossil fuels can be reduced drastically. The second step is a transition from the use of fossil fuels to renewable energy sources. In this sense, organic electrode materials are becoming increasingly attractive compared to inorganic electrode materials which have reached a plateau regarding performance and have severe drawbacks in terms of cost, safety and environmental friendliness. Using organic composites based on conducting polymers, such as polypyrrole, and abundant, cheap and naturally occurring biopolymers rich in quinones, such as lignin, has recently emerged as an interesting alternative. These materials, which exhibit electronic and ionic conductivity, provide challenging opportunities in the development of new charge storage materials. This review presents an overview of recent developments in organic biopolymer composite electrodes as renewable electroactive materials towards sustainable, cheap and scalable energy storage devices.
|
|
| 2. |
- Ajjan, Fátima, 1986-, et al.
(författare)
-
Doped Conjugated Polymer Enclosing a Redox Polymer : Wiring Polyquinones with Poly(3,4‐Ethylenedioxythiophene)
- 2020
-
Ingår i: Advanced Energy and Sustainability Research. - : John Wiley & Sons. - 2699-9412. ; 1:2
-
Tidskriftsartikel (refereegranskat)abstract
- The mass implementation of renewable energies is limited by the absence of efficient and affordable technology to store electrical energy. Thus, the development of new materials is needed to improve the performance of actual devices such as batteries or supercapacitors. Herein, the facile consecutive chemically oxidative polymerization of poly(1-amino-5-chloroanthraquinone) (PACA) and poly(3,4-ethylenedioxythiophene (PEDOT) resulting in a water dispersible material PACA-PEDOT is shown. The water-based slurry made of PACA-PEDOT nanoparticles can be processed as film coated in ambient atmosphere, a critical feature for scaling up the electrode manufacturing. The novel redox polymer electrode is a nanocomposite that withstands rapid charging (16 A g−1) and delivers high power (5000 W kg−1). At lower current density its storage capacity is high (198 mAh g−1) and displays improved cycling stability (60% after 5000 cycles). Its great electrochemical performance results from the combination of the redox reversibility of the quinone groups in PACA that allows a high amount of charge storage via Faradaic reactions and the high electronic conductivity of PEDOT to access to the redox-active sites. These promising results demonstrate the potential of PACA-PEDOT to make easily organic electrodes from a water-coating process, without toxic metals, and operating in non-flammable aqueous electrolyte for large scale pseudocapacitors.
|
|
| 3. |
- Ajjan, Fátima, et al.
(författare)
-
Enhancing Energy Storage Devices with Biomacromolecules in Hybrid Electrodes
- 2019
-
Ingår i: Biotechnology Journal. - : WILEY-V C H VERLAG GMBH. - 1860-6768 .- 1860-7314. ; 14:12
-
Forskningsöversikt (refereegranskat)abstract
- The development of energy storage devices with higher energy and power outputs, and long cycling stability is urgently required in the pursuit of the expanding challenges of electrical energy storage. The utilization of biologically renewable redox compounds holds a great potential in designing sustainable energy storage systems and contributes in reducing the dependence on fossil fuels for energy materials. Quinones are the principal redox centers in natural organic materials and play a key role as charge storage electrode materials because of their abundance, multiple forms and integration into the materials flow through the biosphere. Electrical energy storage devices and systems can be significantly improved by the combination of scalable quinone-based biomaterials with good electronic conductors. This review uses recent examples to show how biopolymers are providing new directions in the development of renewable biohybrid electrodes for energy storage devices.
|
|
| 4. |
- Ajjan, Fátima, et al.
(författare)
-
High performance PEDOT/lignin biopolymer composites for electrochemical supercapacitors
- 2016
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 4:5, s. 1838-1847
-
Tidskriftsartikel (refereegranskat)abstract
- Developing sustainable organic electrode materials for energy storage applications is an urgent task. We present a promising candidate based on the use of lignin, the second most abundant biopolymer in nature. This polymer is combined with a conducting polymer, where lignin as a polyanion can behave both as a dopant and surfactant. The synthesis of PEDOT/Lig biocomposites by both oxidative chemical and electrochemical polymerization of EDOT in the presence of lignin sulfonate is presented. The characterization of PEDOT/Lig was performed by UV-Vis-NIR spectroscopy, FTIR infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, cyclic voltammetry and galvanostatic charge-discharge. PEDOT doped with lignin doubles the specific capacitance (170.4 F g(-1)) compared to reference PEDOT electrodes (80.4 F g(-1)). The enhanced energy storage performance is a consequence of the additional pseudocapacitance generated by the quinone moieties in lignin, which give rise to faradaic reactions. Furthermore PEDOT/Lig is a highly stable biocomposite, retaining about 83% of its electroactivity after 1000 charge/discharge cycles. These results illustrate that the redox doping strategy is a facile and straightforward approach to improve the electroactive performance of PEDOT.
|
|
| 5. |
- Ajjan, Fátima, et al.
(författare)
-
Innovative polyelectrolytes/poly(ionic liquid)s for energy and the environment
- 2017
-
Ingår i: Polymer international. - : WILEY. - 0959-8103 .- 1097-0126. ; 66:8, s. 1119-1128
-
Forskningsöversikt (refereegranskat)abstract
- This paper presents the work carried out within the European project RENAISSANCE-ITN, which was dedicated to the development of innovative polyelectrolytes for energy and environmental applications. Within the project different types of innovative polyelectrolytes were synthesized such as poly(ionic liquid)s coming from renewable or natural ions, thiazolium cations, catechol functionalities or from a new generation of cheap deep eutectic monomers. Further, macromolecular architectures such as new poly(ionic liquid) block copolymers and new (semi)conducting polymer/polyelectrolyte complexes were also developed. As the final goal, the application of these innovative polymers in energy and the environment was investigated. Important advances in energy storage technologies included the development of new carbonaceous materials, new lignin/conducting polymer biopolymer electrodes, new iongels and single-ion conducting polymer electrolytes for supercapacitors and batteries and new poly(ionic liquid) binders for batteries. On the other hand, the use of innovative polyelectrolytes in sustainable environmental technologies led to the development of new liquid and dry water, new materials for water cleaning technologies such as flocculants, oil absorbers, new recyclable organocatalyst platforms and new multifunctional polymer coatings with antifouling and antimicrobial properties. All in all this paper demonstrates the potential of poly(ionic liquid)s for high-value applications in energy and enviromental areas. (c) 2017 Society of Chemical Industry
|
|
| 6. |
- Ajjan, Fátima, et al.
(författare)
-
Scalable Asymmetric Supercapacitors Based on Hybrid Organic/Biopolymer Electrodes
- 2017
-
Ingår i: ADVANCED SUSTAINABLE SYSTEMS. - : WILEY-V C H VERLAG GMBH. - 2366-7486. ; 1:8
-
Tidskriftsartikel (refereegranskat)abstract
- A trihybrid bioelectrode composed of lignin, poly(3,4-ethylenedioxythiophene) (PEDOT), and poly(aminoanthraquinone) (PAAQ) is prepared by a two-step galvanostatic electropolymerization, and characterized for supercapacitor applications. Using PEDOT/Lignin as a base layer, followed by the consecutive deposition of PAAQ, the hybrid electrode PEDOT/Lignin/PAAQ shows a high specific capacitance of 418 F g(-1) with small self-discharge. This trihybrid electrode material can be assembled into symmetric and asymmetric super-capacitors. The asymmetric supercapacitor uses PEDOT + Lignin/PAAQ as positive electrode and PEDOT/PAAQ as negative electrode, and exhibits superior electrochemical performance due to the synergistic effect of the two electrodes, which leads to a specific capacitance of 74 F g(-1). It can be reversibly cycled in the voltage range of 0-0.7 V. More than 80% capacitance is retained after 10 000 cycles. These remarkable features reveal the exciting potential of a full organic energy storage device with long cycle life.
|
|
| 7. |
- Ajjan, Fátima, et al.
(författare)
-
Spectroelectrochemical investigation of redox states in a polypyrrole/lignin composite electrode material
- 2015
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 3:24, s. 12927-12937
-
Tidskriftsartikel (refereegranskat)abstract
- We report spectroelectrochemical studies to investigate the charge storage mechanism of composite polypyrrole/lignin electrodes. Renewable bioorganic electrode materials were produced by electropolymerization of pyrrole in the presence of a water-soluble lignin derivative acting as a dopant. The resulting composite exhibited enhanced charge storage abilities due to a lignin-based faradaic process, which was expressed after repeated electrochemical redox of the material. The in situ FTIR spectroelectrochemistry results show the formation of quinone groups, and reversible oxidation-reduction of these groups during charge-discharge experiments in the electrode materials. The most significant IR bands include carbonyl absorption near 1705 cm(-1), which is attributed to the creation of quinone moieties during oxidation, and absorption at 1045 cm(-1) which is due to hydroquinone moieties.
|
|
| 8. |
- Ajjan Godoy, Fátima Nadia
(författare)
-
Biohybrid Polymer Electrodes for Renewable Energy Storage
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Daily and seasonally fluctuating energy supply and demand requires adequate energy storage solutions. In recent years electrochemical supercapacitors have attracted considerable attention due to their ability to both store and deliver electrical energy efficiently. Our efforts are focused on developing and optimizing sustainable organic electrode materials for supercapacitors based on renewable bioorganic materials, offering a cheap, environmentally friendly and scalable alternative to store energy. In particular, we are using the second most abundant biopolymer in nature, lignin (Lig), which is an insulating material. However, when used in combination with electroactive and conducting polymers such as polypyrrole (PPy) and poly(3,4-ethylenedioxythiophene) (PEDOT), the biohybrid electrodes PPy/Lig and PEDOT/Lig display significantly enhanced energy storage performance as compared to the pristine conducting polymers without the lignin. Redox cyclic voltammetry and galvanostatic charge/discharge measurements indicate that the enhanced performance is due to the additional pseudocapacitance generated by the quinone moieties in lignin. Moreover, a conjugated redoxpolymer poly(aminoanthraquinone) PAAQ, with intrinsic quinone functions and excellentstability, has been combined with lignin and PEDOT resulting in a trihybrid bioelectrode. PEDOT compensates the low conductivity of PAAQ and provides electrical pathways to the quinone groups. The electrochemically generated quinones undergo a two electron, two protonredox process within the biohybrid electrodes as revealed by FTIR spectroelectrochemistry.These remarkable features reveal the exciting potential of a full organic energy storage device with long cycle life. Therefore, supercapacitor devices were designed in symmetric or asymmetric two electrode configuration. The best electrochemical performance was achieved by the asymmetric supercapacitor based on PEDOT+Lignin/PAAQ as the positive electrode and PEDOT/PAAQ as the negative electrode. This device exhibits superior electrochemical performance and outstanding stability after 10000 charge/discharge cycles due to the synergistic effect of the two electrodes. Finally, we have characterized the response of this supercapacitor device when charged with the intermittent power supply from an organic photovoltaic module. We have designed charging/discharging conditions such that reserve power was available in the storage device at all times. This work has resulted in an inexpensive fully organic system witht he dual function of energy conversion and storage.
|
|
| 9. |
- Bäcklund, Fredrik, et al.
(författare)
-
Conducting microhelices from self-assembly of protein fibrils
- 2017
-
Ingår i: Soft Matter. - : Royal Society of Chemistry. - 1744-683X .- 1744-6848. ; 13:25, s. 4412-4417
-
Tidskriftsartikel (refereegranskat)abstract
- Herein we utilize insulin to prepare amyloid based chiral heliceswith either right or left handed helicity. We demonstrate that thehelices can be utilized as structural templates for the conductingpolymer alkoxysulfonate poly(ethylenedioxythiophene) (PEDOT-S).The chirality of the helical assembly is transferred to PEDOT-S asdemonstrated by polarized optical microscopy (POM) and CircularDichroism (CD). Analysis of the helices by conductive atomic force(c-AFM) shows significant conductivity. In addition the morphologyof the template structure is stabilized by PEDOT-S. Theseconductive helical structures represent promising candidates in ourquest for THz resonators.
|
|
| 10. |
- Bäcklund, Fredrik, et al.
(författare)
-
PEDOT-S coated protein fibril microhelices
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- We show here the preparation and characterization of micrometer sized conductive helices. We utilize protein fibrils as structural templates to create chiral helices with either right or left handed helicity. The helices are coated with the conductive polymer alkoxysulfonate poly(ethylenedioxythiophene) (PEDOT-S) to create micrometer sized conductive helices. The coating acts as a stabilizer for the template structure, facilitates the preparation of solid state films and shows significant conductivity. The helices have been investigated using Circular Dichroism (CD) and scanning electron microscopy (SEM) and the conductivity have been measured for solid state films.
|
|
