| 1. |
|
|
| 2. |
- Admassie, Shimelis, et al.
(författare)
-
Electrochemical and optical studies of the band gaps of alternating polyfluorene copolymers
- 2006
-
Ingår i: Synthetic metals. - : Elsevier BV. - 0379-6779 .- 1879-3290. ; 156:7-8, s. 614-623
-
Tidskriftsartikel (refereegranskat)abstract
- The electrochemical and optical properties of a series of alternating polyfluorene copolymers with low band gaps were determined. These polymers incorporated fluorene units alternating with groups including electron-withdrawing (A) and electron-donating (D) groups in donor-acceptor-donor (DAD) sequence to achieve the lowering of band gaps. The polymers were solvent-casted on platinum disk electrode and the band gaps were estimated from cyclic voltammetry (CV). These values were compared with values obtained from optical absorption measurements. Although the electrochemically determined band gaps were found to be slightly higher than the optical band gap in most cases, values are well correlated. The values of the band gaps determined range from 2.1 to 1.3 eV. © 2006 Elsevier B.V. All rights reserved.
|
|
| 3. |
- Ajjan, Fátima, 1986-, et al.
(författare)
-
Doped Conjugated Polymer Enclosing a Redox Polymer : Wiring Polyquinones with Poly(3,4‐Ethylenedioxythiophene)
- 2020
-
Ingår i: Advanced Energy and Sustainability Research. - : John Wiley & Sons. - 2699-9412. ; 1:2
-
Tidskriftsartikel (refereegranskat)abstract
- The mass implementation of renewable energies is limited by the absence of efficient and affordable technology to store electrical energy. Thus, the development of new materials is needed to improve the performance of actual devices such as batteries or supercapacitors. Herein, the facile consecutive chemically oxidative polymerization of poly(1-amino-5-chloroanthraquinone) (PACA) and poly(3,4-ethylenedioxythiophene (PEDOT) resulting in a water dispersible material PACA-PEDOT is shown. The water-based slurry made of PACA-PEDOT nanoparticles can be processed as film coated in ambient atmosphere, a critical feature for scaling up the electrode manufacturing. The novel redox polymer electrode is a nanocomposite that withstands rapid charging (16 A g−1) and delivers high power (5000 W kg−1). At lower current density its storage capacity is high (198 mAh g−1) and displays improved cycling stability (60% after 5000 cycles). Its great electrochemical performance results from the combination of the redox reversibility of the quinone groups in PACA that allows a high amount of charge storage via Faradaic reactions and the high electronic conductivity of PEDOT to access to the redox-active sites. These promising results demonstrate the potential of PACA-PEDOT to make easily organic electrodes from a water-coating process, without toxic metals, and operating in non-flammable aqueous electrolyte for large scale pseudocapacitors.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Bian, Qingzhen, 1988-
(författare)
-
Excitonic and charge carrier transport in organic materials and device applications
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- With the potential for future commercial use, organic electronics have been intensively studied for the last few decades. To exploit the next generation of high-performance devices, detailed study of the underlying physics is essential. Excitonic and charge carrier transport plays a critical role in device performance and related studies have attracted a lot of attention in recent decades. This thesis particularly focused on excitonic and charge carrier transport in organic materials and related device applications.In natural light harvesting systems, such as the reaction centers of purple bacteria, quantum coherence has been proposed to be present as a contributor to the related charge and energy transport processes, and almost 100% charge conversion is present in these efficient biological systems. This high energy conversion efficiency inspires the idea that if a similar strategy was used in artificial energy conversion devices such as organic photovoltaics, etc., this could significantly enhance the device’s performance. In the first study, the charge separation process in some donor/acceptor blends was investigated. The contribution of quantum coherence to device performance was studied in detail using several steady state and ultrafast transient techniques. In one efficient donor/acceptor blend, a pronounced coherence of charge separation was identified, which contributed to the enhancement of the photocurrent generation, which finally resulted in efficient device performance.For the light emitting diodes, triplet excitons harvesting plays a critical role in device performance. In the thermally activated delayed fluorescence (TADF) materials, due to an efficient reverse intersystem process from triplet excitons to singlet excitons, the losses due to triplet excitons were suppressed. As a result, a desired high quantum yield has been achieved. To enhance device efficiency, the detailed study of the upconversion physics between triplet and singlet is needed. Previous studies have proposed some physical models to explain this efficient upconversion process, while the nature of this physical process is still under debate and unclear. In my second work, we studied the exciton kinetics in two different TADF materials. These TADF materials were inserted in a protein fibril host, and the resulting protein scaffold was able to modify the geometric configuration of the related TADF molecule. As a result, an enhancement of the photoluminescence quantum yield was achieved.To achieve efficient device performance in organic electronics, the physical processes at the metal/material interface and charge carrier injection/extraction, also play a critical role. Efficient charge injection can be achieved by Ohmic contact, and charge injection/extraction of metal/organic materials has been intensively studied in the last few decades. In my third study, an efficient hole transport material based on the biopolymer DNA was introduced. A hole doping process was found in the hybrid materials and contributes to the Ohmic contacts. The hybrid material can be used in different organic electronics devices, such as field effect transistors, light emitting diodes and solar cells, and thus demonstrates a general application capability.In organic photovoltaics, the loss from the open circuit photovoltages has been an Achilles’ heel for further enhancement of device performance. The voltage loss includes the radiative and non-radiative value, and intensive studies have focused on how to suppress losses from the non-radiative channel. In my fourth study, the non-radiative voltage loss was studied in a series of terpolymer blends and ternary blends. Compared to the ternary blends, a decreased nonradiative loss was found in the terpolymer blends.
|
|
| 9. |
- Bian, Qingzhen, 1988-, et al.
(författare)
-
Vibronic coherence contributes to photocurrent generation in organic semiconductor heterojunction diodes
- 2020
-
Ingår i: Nature Communications. - : NATURE PUBLISHING GROUP. - 2041-1723. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- Charge separation dynamics after the absorption of a photon is a fundamental process relevant both for photosynthetic reaction centers and artificial solar conversion devices. It has been proposed that quantum coherence plays a role in the formation of charge carriers in organic photovoltaics, but experimental proofs have been lacking. Here we report experimental evidence of coherence in the charge separation process in organic donor/acceptor heterojunctions, in the form of low frequency oscillatory signature in the kinetics of the transient absorption and nonlinear two-dimensional photocurrent spectroscopy. The coherence plays a decisive role in the initial 200 femtoseconds as we observe distinct experimental signatures of coherent photocurrent generation. This coherent process breaks the energy barrier limitation for charge formation, thus competing with excitation energy transfer. The physics may inspire the design of new photovoltaic materials with high device performance, which explore the quantum effects in the next-generation optoelectronic applications.
|
|
| 10. |
- Campoy-Quiles, M., et al.
(författare)
-
On the determination of anistropy in polymer thin films : A comparative study of optical techniques
- 2008
-
Ingår i: Physica Status Solidi. C: Current Topics in Solid State Physics. - Weinheim, Germany : Wiley-VCH Verlagsgesellschaft. - 1862-6351. ; 5:5, s. 1270-1273
-
Tidskriftsartikel (refereegranskat)abstract
- We have used seven different techniques to measure the anisotropic refractive index of poly(vinylcarbazole) films. These techniques are: two types of variable angle spectroscopic ellipsometry (VASE) with multiple sample analysis, Interference enhanced VASE, Transmittance combined with VASE, Polarised Reflectance, beta-scan VASE, and prism coupling. We have found the average ordinary and extraordinary indices at 633 nm to be no = nTE = 1.675 ± 0.008, and ne = nTM = 1.722 ± 0.018, respectively, consistent amongst methods and conclusive on the magnitude of Δn in polymer films.
|
|
