| 21. |
- Abbasi, Mazhar Ali, et al.
(författare)
-
Anions effect on the low temperature growth of ZnO nanostructures
- 2012
-
Ingår i: Vacuum. - : Elsevier. - 0042-207X .- 1879-2715. ; 86:12, s. 1998-2001
-
Tidskriftsartikel (refereegranskat)abstract
- Seed mediated aqueous chemical growth (ACG) route was used for the growth of ZnO nanostructures on Si substrate in four different growth mediums. The growth medium has shown to affect the morphology and the size of the different nanostructures. We observed that the medium containing zinc nitrate anions yields the nanorods, in a medium containing zinc acetate anions nano-candles are obtained. While in a medium containing zinc chloride anions ZnO nano-discs were obtained and in a medium containing zinc sulfate anions nano-flakes are achieved. Growth in these different mediums has also shown effect on the optical emission characteristics of the different ZnO nanostructures.
|
|
| 22. |
- Abbasi, Mazhar Ali, et al.
(författare)
-
Fabrication of UV photo-detector based on coral reef like p-NiO/n-ZnO nanocomposite structures
- 2013
-
Ingår i: Materials letters (General ed.). - : Elsevier. - 0167-577X .- 1873-4979. ; 108, s. 149-152
-
Tidskriftsartikel (refereegranskat)abstract
- In this research work, a UV photo-detector is fabricated on fluorine doped tin oxide (FTO) glass substrate by exploiting the advantageous features of p-n heterojunctions based on p-NiO and n-ZnO composite nanostructures forming a coral-reef like structures. Scanning electron microscopy (SEM) and X-ray diffraction results showed uniform morphology and good crystal quality of the synthesised nanostructures respectively. I-V measurements have shown nonlinear and rectifying response of the p-NiO/n-ZnO heterojunction. The proposed photodiode exhibited excellent UV response with acceptable photocurrent generation of about 3.4 mA and the responsivity of 2.27 A/W at -3 biasing voltage.
|
|
| 23. |
- Abbasi, Mazhar Ali, et al.
(författare)
-
Iron (III) Ion Sensor Based on the Seedless Grown ZnO Nanorods in 3 Dimensions Using Nickel Foam Substrate
- 2013
-
Ingår i: Journal of Sensors. - : Hindawi Publishing Corporation. - 1687-725X .- 1687-7268. ; :382726
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work, the seedless, highly aligned and vertical ZnO nanorods in 3 dimensions (3D) were grown on the nickel foam substrate. The seedless grown ZnO nanorods were characterised by field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD) techniques. The characterised seedless ZnO nanorods in 3D on nickel foam were highly dense, perpendicular to substrate, grown along the (002) crystal plane, and also composed of single crystal. In addition to this, these seedless ZnO nanorods were functionalized with trans-dinitro-dibenzo-18-6 crown ether, a selective iron (III) ion ionophore, along with other components of membrane composition such as polyvinyl chloride (PVC), 2-nitopentylphenyl ether as plasticizer (NPPE), and tetrabutyl ammonium tetraphenylborate (TBATPB) as conductivity increaser. The sensor electrode has shown high linearity with a wide range of detection of iron (III) ion concentrations from 0.005 mM to 100 mM. The low limit of detection of the proposed ion selective electrode was found to be 0.001 mM. The proposed sensor also described high storage stability, selectivity, reproducibility, and repeatability and a quick response time of less than 10 s.
|
|
| 24. |
- Abbasi, Mazhar Ali, et al.
(författare)
-
Potentiometric Zinc Ion Sensor Based on Honeycomb-Like NiO Nanostructures
- 2012
-
Ingår i: Sensors. - : MDPI. - 1424-8220. ; 12:11, s. 15424-15437
-
Tidskriftsartikel (refereegranskat)abstract
- In this study honeycomb-like NiO nanostructures were grown on nickel foam by a simple hydrothermal growth method. The NiO nanostructures were characterized by field emission electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) techniques. The characterized NiO nanostructures were uniform, dense and polycrystalline in the crystal phase. In addition to this, the NiO nanostructures were used in the development of a zinc ion sensor electrode by functionalization with the highly selective zinc ion ionophore 12-crown-4. The developed zinc ion sensor electrode has shown a good linear potentiometric response for a wide range of zinc ion concentrations, ranging from 0.001 mM to 100 mM, with sensitivity of 36 mV/decade. The detection limit of the present zinc ion sensor was found to be 0.0005 mM and it also displays a fast response time of less than 10 s. The proposed zinc ion sensor electrode has also shown good reproducibility, repeatability, storage stability and selectivity. The zinc ion sensor based on the functionalized NiO nanostructures was also used as indicator electrode in potentiometric titrations and it has demonstrated an acceptable stoichiometric relationship for the determination of zinc ion in unknown samples. The NiO nanostructures-based zinc ion sensor has potential for analysing zinc ion in various industrial, clinical and other real samples.
|
|
| 25. |
- Abdo, A. A., et al.
(författare)
-
A change in the optical polarization associated with a gamma-ray flare in the blazar 3C 279
- 2010
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 463:7283, s. 919-923
-
Tidskriftsartikel (refereegranskat)abstract
- It is widely accepted that strong and variable radiation detected over all accessible energy bands in a number of active galaxies arises from a relativistic, Doppler-boosted jet pointing close to our line of sight(1). The size of the emitting zone and the location of this region relative to the central supermassive black hole are, however, poorly known, with estimates ranging from light-hours to a light-year or more. Here we report the coincidence of a gamma (gamma)-ray flare with a dramatic change of optical polarization angle. This provides evidence for co-spatiality of optical and gamma-ray emission regions and indicates a highly ordered jet magnetic field. The results also require a non-axisymmetric structure of the emission zone, implying a curved trajectory for the emitting material within the jet, with the dissipation region located at a considerable distance from the black hole, at about 10(5) gravitational radii.
|
|
| 26. |
- Abdo, A. A., et al.
(författare)
-
Fermi Gamma-Ray Imaging of a Radio Galaxy
- 2010
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 328:5979, s. 725-729
-
Tidskriftsartikel (refereegranskat)abstract
- The Fermi Gamma-ray Space Telescope has detected the gamma-ray glow emanating from the giant radio lobes of the radio galaxy Centaurus A. The resolved gamma-ray image shows the lobes clearly separated from the central active source. In contrast to all other active galaxies detected so far in high-energy gamma-rays, the lobe flux constitutes a considerable portion (greater than one-half) of the total source emission. The gamma-ray emission from the lobes is interpreted as inverse Compton-scattered relic radiation from the cosmic microwave background, with additional contribution at higher energies from the infrared-to-optical extragalactic background light. These measurements provide gamma-ray constraints on the magnetic field and particle energy content in radio galaxy lobes, as well as a promising method to probe the cosmic relic photon fields.
|
|
| 27. |
- Abdul Abas, Riad, et al.
(författare)
-
Studies on Graphitisation of Blast Furnace Coke by X-ray Diffraction Analysis and Thermal Diffusivity Measurements
- 2005
-
Ingår i: Steel research. - : Wiley. - 0177-4832 .- 1611-3683. ; 77:11, s. 763-769
-
Tidskriftsartikel (refereegranskat)abstract
- High temperature XRD and thermal diffusivity experiments were employed to investigate the degree of graphitisation in blast furnace coke. The experiments were conducted between room temperature and 1473 K. X-ray diffraction studies were carried out in order to monitor the degree of graphitisation in the coke samples from the same campaign. In these cases, the degree of graphitisation was followed by the changes in the vertical dimension. The degree of graphitisation was found to be dependent on temperature. On the other hand, the graphitisation at each temperature was instantaneous, even at as low a temperature as 973 K and no dependency on time could be noticed. The thermal diffusivities of the coke samples taken from deeper level of the experimental blast furnace were measured using the laser-flash technique. The results from these measurements showed that thermal diffusivities increased with the degree of graphitisation, which in turn, can be affected by the level in the blast furnace at which the coke sample was taken. The present results indicate that the degree of graphitisation as followed by X-ray diffraction analysis as well as thermal diffusivities can be used to trace the thermal history of coke. DSC measurements show that the heat capacity of the coke increases with temperature towards the heat capacity of graphite, which could be due to the increasing the graphitisation degree of the coke.
|
|
| 28. |
- Abdul Abas, Riad, et al.
(författare)
-
Thermal Diffusivity Measurements of some Industrially Important Alloys by a Laser Flash Method
- 2007
-
Ingår i: International journal of materials reseach. - : Walter de Gruyter GmbH. - 1862-5282 .- 2195-8556. ; 98:6, s. 535-540
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work, thermal diffusivity measurements of three industrially significant alloys, viz. 90Ti.6Al.4V, stainless steel with 25Cr and 6Ni as well as plain carbon steel with 0.7 % carbon have been carried out as a function of temperature. The aim of this work is to study the effect of temperature and microstructure on the thermal diffusivities of these alloys. For the 90Ti.6Al.4V alloy, thermal diffusivity increases with temperature below 1225 K. Above this temperature, the values started decreasing probably due to the dissolution of Ti3Al intermediate phase in the matrix, which would result in an increase in the disorder of the structure. For 25Cr: 6Ni stainless steel, the thermal diffusivity is nearly constant up to about 700 K. Above this, there is an increase in the thermal diffusivities with temperature during the heating cycle, which was reproducible during thermal cycling. On the other hand, the slope of the curve increases above 950 K. In the case of the 0.7 % carbon steel, the thermal diffusivity shows a decreasing trend with temperature below the Curie point for the alloy, where the alloy consists of bcc + fcc phases. Above this point, only the fcc phase is prevalent and the thermal diffusivity was found to increase with temperature. Heat transfer is carried out by lattice vibration (phonons) as well as electrons. The contribution of electrons varies depending upon the type of alloy. In this study, the highest electron contribution was found in 0.7 % carbon steel, while the lowest was in stainless steel. The thermal conductivity values of these alloys are in good agreement with the calculated values using the model proposed by Mills.
|
|
| 29. |
- Abdul Abas, Riad, et al.
(författare)
-
Thermal Diffusivity of Sintered Stainless steel-Alumina Composites
- 2006
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer Nature. - 1073-5615 .- 1543-1916. ; 37:4, s. 513-518
-
Tidskriftsartikel (refereegranskat)abstract
- Thermal diffusivity measurements were carried out as a function of temperature on sintered AISI 304 stainless steel-alumina composites having various compositions (0.001, 0.01, 0, 1, 1, 2, 3, 5, 7, 8, and 10 wt pct Al2O3). The measurements were carried out between room temperature and 1473 K. The thermal diffusivity and the thermal conductivity were found to increase with temperature in all the composite specimens. The thermal diffusivity was found to decrease with increasing weight fraction of alumina. This tendency can clearly be seen at temperatures above 755 K. The experimental results are in good agreement with the simple rule of mixture, the Eucken equation, and the Ohm’s law model developed by Hayashi et al. at weight fractions of alumina below 5 wt pct. Beyond this composition, the thermal diffusivity/conductivity shows a large discrepancy from the models. This could probably be attributed to the accumulation of alumina particles during cooled pressing and sintering.
|
|
| 30. |
|
|
