| 1. |
- A., Adare, et al.
(författare)
-
Transverse energy production and charged-particle multiplicity at midrapidity in various systems from sNN =7.7 to 200 GeV
- 2016
-
Ingår i: Physical Review C. - 2469-9985. ; 93:2
-
Tidskriftsartikel (refereegranskat)abstract
- Measurements of midrapidity charged-particle multiplicity distributions, dNch/dη, and midrapidity transverse-energy distributions, dET/dη, are presented for a variety of collision systems and energies. Included are distributions for Au+Au collisions at sNN=200, 130, 62.4, 39, 27, 19.6, 14.5, and 7.7 GeV, Cu+Cu collisions at sNN=200 and 62.4 GeV, Cu+Au collisions at sNN=200 GeV, U+U collisions at sNN=193 GeV, d+Au collisions at sNN=200 GeV, He3+Au collisions at sNN=200 GeV, and p+p collisions at sNN=200 GeV. Centrality-dependent distributions at midrapidity are presented in terms of the number of nucleon participants, Npart, and the number of constituent quark participants, Nqp. For all A+A collisions down to sNN=7.7 GeV, it is observed that the midrapidity data are better described by scaling with Nqp than scaling with Npart. Also presented are estimates of the Bjorken energy density, BJ, and the ratio of dET/dη to dNch/dη, the latter of which is seen to be constant as a function of centrality for all systems.
|
|
| 2. |
|
|
| 3. |
- Aamodt, Edvard, et al.
(författare)
-
Review of efficient manual fire extinguishing methods and equipment for the fire service
- 2020
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- The late 90s and the early 2000s was a period with relative extensive research and innovation in the area of manual fire extinguishing methods and equipment for the fire service. New equipment such as the cutting extinguisher and extinguishing spears allowed to conduct offensive attacks from the exterior of a building, reducing the exposure of fire fighters to fire and smoke and their associated risks in general. This led to the development of new firefighting tactics, as for example the Quadrant Model of the Dutch fire service, which extends the “traditional” offensive interior attack and defensive exterior attack by the offensive exterior attack and defensive interior attack.Recently the research focus has furthermore increasingly shifted to environmental aspects, such as the water consumption and effect of additives (i.e., foam) on humans and the environment. Extinguishing with smaller amounts of water is beneficial for the environment, reduces water damage and lowers the burden on the water delivery system.ConclusionIn conclusion, the systems most relevant to be further tested in a fire situation in a small house or dwelling are the cutting extinguisher and the extinguishing spear.These systems are different in operation but have both shown to be promising with regard to fulfilling the different objectives of the overall project. Being relatively easy to utilize with the right training during internal extinguishing efforts executed from the outside of the building, and being only water based to minimize contamination, due to lower water consumption, of the surrounding areas give these systems advantages over conventional equipment.Especially if the systems are used in combination with an IR camera to locate the fire, the extinguishing efforts can be started early and effectively, and the water amount needed to control the fire may be reduced. The need for firefighters with breathing apparatus is reduced as well, hence reducing the smoke exposure to firefighters.The fact that the fire service also recognizes the potential of using these systems early in the extinguishing efforts, and is working on implementing them, prompts the need for scientific backup.
|
|
| 4. |
- Aamodt, Edvard, et al.
(författare)
-
Sikkerhetsbehov for kullgriller i restauranter
- 2020
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- The RISE report 2019:04 «Charcoal and wood burning ovens in restaurants – Fire safety and documentation requirements» [1] investigated regulations and documental demands tied to charcoal and wood burning ovens in restaurants in Norway. A part of the conclusion in this report emphasized the need for, through physical testing, mapping whether existing test standards covers the safety requirements of charcoal ovens in restaurants. NS-EN 13240:2001 «Roomheaters fired with solid fuel. Requirements and test methods» [2] was chosen as a relevant test standard. Three test ovens (a closed test oven, a dummy oven and an open test oven) was produced at RISE Fire Research. Their construction with regard to insulation capabilities, materials and dimensions was based on existing charcoal ovens placed on the Norwegian marked. This was done to achieve an objective depiction of the issue, without the need for a specific brand of ovens. Restaurant oven charcoal was utilized to achieve as real heat development as possible in the test ovens. The test layout is based on NS-EN 12340:2001, with a test rigg constructed of two «safety walls», ceiling and floor attached with thermocouples. Temperatures from the test oven are registered in the safety walls at several positions according to a standardised grid, and in the ceiling and the floor each have one single measurement position measuring warmest point. Thermocouples in the chimney and exhaust duct measured the flue gas temperatures transported to the exhaust system. Four different tests were conducted, where the first one was a standardized safety test including the closed oven model. The second test was the same safety test setup with the dummy oven besides the closed oven. The dummy contained a built-in propane burner to simulate the heat load from a real oven. The purpose was to simulate two ovens placed next to each other. The third test was an overload test on the closed test oven with 150 % fuel load and higher refuelling frequency. The last test was a test of the open test oven. The safety test method described in NS-EN 13240:2001 is suitable to test the level of stable maximal temperature in the surrounding combustible materials, in the same way as for roomheaters, which the method is designed for. The method addresses safety aspects such as surface temperatures and handles on the oven. Tests show that the temperatures developed in the ovens have the potential to breech the temperature criterion given by the test standard, and therefore contribute to the ignition of surrounding combustible materials. Such situations pose a fire risk and safety measures regarding this aspect must be documented by the producer. NS-EN13240:2001 does not cover temperatures for exhaust duct and the production of sparks and their possible spread to combustible materials. These are important safety aspects which must be addressed when documenting the fire safety of restaurant grills. Tests show that sparks are created in the oven, including from restaurant charcoal fuel, and are transported into the exhaust duct, and out through the opening of the grill door. Together with high flue gas temperatures in the exhaust duct and deposits of soot and cooking oil this pose a fire risk. Documentation must therefore be presented, showing that the oven is equipped with measures (for instance spark screen) which guards the exhaust duct from sparks to a satisfactory degree. Operators of the oven must receive adequate training and must operate the closed oven with caution, as to avoid incidents with sparks being released though the door. The placement of ovens next to each other does not seem to increase the heat load on surrounding walls but may lead to increased temperatures in between the ovens. The consequences of temperature increases must be documented. Tests show that overloading with fuel and intensifying the refuelling intervals can lead to increased temperatures in the oven, which can affect materials and welding seams. Overloading can also affect the temperatures towards surrounding walls and exhaust ducts and therefore may affect fire safety negatively. NS-EN 13240:2001 requires the producer to documents how the oven is constructed and of what materials, and that the welding seams are dimensioned for the materials used. It is recommended that the producer documents the safety level of the oven materials with an overload test. It must also be documented that the exhaust ducts in which the flue gas are transported are constructed to handle the potential temperatures that can arise, including erroneous use.
|
|
| 5. |
- Aamodt, Ina Thon, et al.
(författare)
-
Health Care Professionals Perceptions of Home Telemonitoring in Heart Failure Care: Cross-Sectional Survey
- 2019
-
Ingår i: Journal of Medical Internet Research. - : JMIR PUBLICATIONS, INC. - 1438-8871. ; 21:2
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Noninvasive telemonitoring (TM) can be used in heart failure (HF) patients to perform early detection of decompensation at home, prevent unnecessary health care utilization, and decrease health care costs. However, the evidence is not sufficient to be part of HF guidelines for follow-up care, and we have no knowledge of how TM is used in the Nordic Baltic region. Objective: The aim of this study was to describe health care professionals (HCPs) perception of and presumed experience with noninvasive TM in daily HF patient care, perspectives of the relevance of and reasons for applying noninvasive TM, and barriers to the use of noninvasive TM. Methods: A cross-sectional survey was performed between September and December 2016 in Norway and Lithuania with physicians and nurses treating HF patients at either a hospital ward or an outpatient clinic. A total of 784 questionnaires were sent nationwide by postal mail to 107 hospitals. The questionnaire consisted of 43 items with close- and open-ended questions. In Norway, the response rate was 68.7% (226/329), with 57 of 60 hospitals participating, whereas the response rate was 68.1% (310/455) in Lithuania, with 41 of 47 hospitals participating. Responses to the closed questions were analyzed using descriptive statistics, and the open-ended questions were analyzed using summative content analysis. Results: This study showed that noninvasive TM is not part of the current daily clinical practice in Norway or Lithuania. A minority of HCPs responded to be familiar with noninvasive TM in HF care in Norway (48/226, 21.2%) and Lithuania (64/310, 20.6%). Approximately half of the HCPs in both countries perceived noninvasive TM to be relevant in follow-up of HF patients in Norway (131/226, 58.0%) and Lithuania (172/310, 55.5%). For physicians in both countries and nurses in Norway, the 3 most mentioned reasons for introducing noninvasive TM were to improve self-care, to reduce hospitalizations, and to provide high-quality care, whereas the Lithuanian nurses described ability to treat more patients and to reduce their workload as reasons for introducing noninvasive TM. The main barriers to implement noninvasive TM were lack of funding from health care authorities or the Territorial Patient Fund. Moreover, HCPs perceive that HF patients themselves could represent barriers because of their physical or mental condition in addition to a lack of internet access. Conclusions: HCPs in Norway and Lithuania are currently nonusers of TM in daily HF care. However, they perceive a future with TM to improve the quality of care for HF patients. Financial barriers and HF patients condition may have an impact on the use of TM, whereas sufficient funding from health care authorities and improved knowledge may encourage the more widespread use of TM in the Nordic Baltic region and beyond.
|
|
| 6. |
- Aamodt, Ina Thon, et al.
(författare)
-
Informal Caregivers Experiences with Performing Telemonitoring in Heart Failure Care at Home-A Qualitative Study
- 2022
-
Ingår i: Healthcare. - : MDPI. - 2227-9032. ; 10:7
-
Tidskriftsartikel (refereegranskat)abstract
- Informal caregivers have an important role in caring for family members at home. Supporting persons with a chronic illness such as heart failure (HF) in managing their self-care is reported to be a challenge and telemonitoring has been suggested to be of support. Aim: to explore informal caregivers experiences with performing non-invasive telemonitoring to support persons with HF at home for 30 days following hospital discharge in Norway and Lithuania. Methods: A qualitative explorative study of informal caregivers performing non-invasive telemonitoring using lung-impedance measurements and short message service (SMS). Data was collected using semi-structured interviews with informal caregivers of persons with HF in NYHA class III-IV in Norway and Lithuania. Results: Nine interviews were conducted with informal caregivers of persons with HF who performed non-invasive telemonitoring at home. A sequential process of three categories emerged from the data: access to support, towards routinizing, and mastering non-invasive telemonitoring. Conclusion: Informal caregivers performed non-invasive telemonitoring for the first time in this study. Their experiences were of a sequential process that included access to support from health care professionals, establishing a routine together, and access to nurses or physicians in HF care as part of mastering. This study highlights involving informal caregivers and persons with HF together in the implementation and future research of telemonitoring in HF care.
|
|
| 7. |
- Aamodt, Ina Thon, et al.
(författare)
-
Self-Care Monitoring of Heart Failure Symptoms and Lung Impedance at Home Following Hospital Discharge: Longitudinal Study
- 2020
-
Ingår i: Journal of Medical Internet Research. - : JMIR PUBLICATIONS, INC. - 1438-8871. ; 22:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Self-care is key to the daily management of chronic heart failure (HF). After discharge from hospital, patients may struggle to recognize and respond to worsening HF symptoms. Failure to monitor and respond to HF symptoms may lead to unnecessary hospitalizations. Objective: This study aimed to (1) determine the feasibility of lung impedance measurements and a symptom diary to monitor HF symptoms daily at home for 30 days following hospital discharge and (2) determine daily changes in HF symptoms of pulmonary edema, lung impedance measurements, and if self-care behavior improves over time when patients use these self-care monitoring tools. Methods: This study used a prospective longitudinal design including patients from cardiology wards in 2 university hospitals-one in Norway and one in Lithuania. Data on HF symptoms and pulmonary edema were collected from 10 participants (mean age 64.5 years; 90% (9/10) male) with severe HF (New York Heart Association classes III and IV) who were discharged home after being hospitalized for an HF condition. HF symptoms were self-reported using the Memorial Symptom Assessment Scale for Heart Failure. Pulmonary edema was measured by participants using a noninvasive lung impedance monitor, the Cardio Set Edema Guard Monitor. Informal caregivers aided the participants with the noninvasive measurements. Results: The prevalence and burden of shortness of breath varied from participants experiencing them daily to never, whereas lung impedance measurements varied for individual participants and the group participants, as a whole. Self-care behavior score improved significantly (P=.007) from a median of 56 (IQR range 22-75) at discharge to a median of 81 (IQR range 72-98) 30 days later. Conclusions: Noninvasive measurement of lung impedance daily and the use of a symptom diary were feasible at home for 30 days in HF patients. Self-care behavior significantly improved after 30 days of using a symptom diary and measuring lung impedance at home. Further research is needed to determine if daily self-care monitoring of HF signs and symptoms, combined with daily lung impedance measurements, may reduce hospital readmissions.
|
|
| 8. |
- Aamodt, Ina Thon, et al.
(författare)
-
Tools to Support Self-Care Monitoring at Home: Perspectives of Patients with Heart Failure
- 2020
-
Ingår i: International Journal of Environmental Research and Public Health. - : MDPI. - 1661-7827 .- 1660-4601. ; 17:23
-
Tidskriftsartikel (refereegranskat)abstract
- Self-care monitoring at home can be a challenge for patients with heart failure (HF). Tools that leverage information and communication technology (ICT), comprise medical devices, or have written material may support their efforts at home. The aim of this study was to describe HF patients experiences and their prioritization of tools that support, or could support, self-care monitoring at home. A descriptive qualitative design employing semi-structured interviews was used with HF patients living at home and attending an HF outpatient clinic in Norway. We used a deductive analysis approach, using the concept of self-care monitoring with ICT tools, paper-based tools, medical devices, and tools to consult with healthcare professionals (HCPs) as the categorization matrix. Nineteen HF patients with a mean age of 64 years participated. ICT tools are used by individual participants to identify changes in their HF symptoms, but are not available by healthcare services. Paper-based tools, medical devices, and face-to-face consultation with healthcare professionals are traditional tools that are available and used by individual participants. HF patients use traditional and ICT tools to support recognizing, identifying, and responding to HF symptoms at home, suggesting that they could be used if they are available and supplemented by in-person consultation with HCPs.
|
|
| 9. |
- Aamodt, K., et al.
(författare)
-
Alignment of the ALICE Inner Tracking System with cosmic-ray tracks
- 2010
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 5
-
Konferensbidrag (refereegranskat)abstract
- ALICE (A Large Ion Collider Experiment) is the LHC (Large Hadron Collider) experiment devoted to investigating the strongly interacting matter created in nucleus-nucleus collisions at the LHC energies. The ALICE ITS, Inner Tracking System, consists of six cylindrical layers of silicon detectors with three different technologies; in the outward direction: two layers of pixel detectors, two layers each of drift, and strip detectors. The number of parameters to be determined in the spatial alignment of the 2198 sensor modules of the ITS is about 13,000. The target alignment precision is well below 10 mu m in some cases (pixels). The sources of alignment information include survey measurements, and the reconstructed tracks from cosmic rays and from proton-proton collisions. The main track-based alignment method uses the Millepede global approach. An iterative local method was developed and used as well. We present the results obtained for the ITS alignment using about 10(5) charged tracks from cosmic rays that have been collected during summer 2008, with the ALICE solenoidal magnet switched off.
|
|
| 10. |
- Aamodt, K., et al.
(författare)
-
Centrality Dependence of the Charged-Particle Multiplicity Density at Midrapidity in Pb-Pb Collisions at root s(NN)=2.76 TeV
- 2011
-
Ingår i: Physical Review Letters. - 1079-7114. ; 106:3
-
Tidskriftsartikel (refereegranskat)abstract
- The centrality dependence of the charged-particle multiplicity density at midrapidity in Pb-Pb collisions at root s(NN) = 2: 76 TeV is presented. The charged-particle density normalized per participating nucleon pair increases by about a factor of 2 from peripheral (70%-80%) to central (0%-5%) collisions. The centrality dependence is found to be similar to that observed at lower collision energies. The data are compared with models based on different mechanisms for particle production in nuclear collisions.
|
|
