| 31. |
- Hagerman, Inger, et al.
(författare)
-
Effects on heart rate variability by artificially generated indoor nano-sized particles in a chamber study
- 2014
-
Ingår i: Atmospheric Environment. - : Elsevier BV. - 1352-2310. ; 88, s. 165-171
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Airborne particles are associated with increased morbidity and mortality due to respiratory and cardiovascular diseases in polluted areas. There is a growing interest in nano-sized particles with diameter < 100 nm and their potential health effects. Heart rate variability (HRV) is a noninvasive method for cardiovascular risk prediction in high prevalent groups. Aim of study: The aim was to evaluate the impact of nano-sized indoor air particles on HRV for healthy and adult females. Methods: All exposures were performed as controlled chamber experiments with particle exposure from burning candles, terpene + ozone reactions or filtered air in a double-blind cross over design. Twenty-two healthy females were investigated during 10 min periods at different exposures and the reactivity in high frequency (HF) spectral band of HRV were computed. Results: Heart rate was unchanged from baseline values in all groups during all experimental settings. HF power of HRV tended to increase during exposure to particles from burning candle while particles from terpene + ozone reactions tended to decrease HF power. Conclusions: Exposure to nano-sized particles of burning candles or terpene + ozone reactions results in different patterns of heart rate variability, with signs of altered autonomic cardiovascular control. Practical implications: This study indicates that the HRV method may be used for information on physiological responses of exposure to different nano-sized particles and contribute to the understanding of mechanisms behind health effects of particle exposures. (C) 2014 The Authors. Published by Elsevier Ltd.
|
|
| 32. |
|
|
| 33. |
- Hedmer, Maria, et al.
(författare)
-
Diesel Exhaust Exposure Assessment Among Tunnel Construction Workers—Correlations Between Nitrogen Dioxide, Respirable Elemental Carbon, and Particle Number
- 2017
-
Ingår i: Annals of Work Exposures and Health. - : Oxford University Press (OUP). - 2398-7308 .- 2398-7316. ; 61:5, s. 539-553
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: Occupational exposure to diesel exhaust is common due the widespread use of dieselpowered combustion engines. Diesel exhaust is chemically complex and consists of thousands of compounds present as gases and particulate matter. Both nitrogen dioxide (NO2) and elemental carbon(EC) have been used as markers for diesel exhaust exposure. Currently EC is regarded as the best surrogate of diesel exhaust. The objective was to quantify the occupational exposure to diesel exhaust in underground tunnel construction work using a multi-metric approach, and to investigate the correlations between NO2, respirable EC, respirable organic carbon (OC), respirable total carbon(TC), respirable dust (RD), and particle number. Also, the use of NO2 as a proxy for diesel exhaust was evaluated, how much of the variability in the diesel exhaust exposure was attributed to within and between individual factors and if there was a difference between expert and self-administered measurements of NO2. Methods: The personal exposure to diesel exhaust was assessed by expert supervised measurements of NO2, EC, OC, TC, RD and particle number in the breathing zones of underground tunnel workers. Stationary sampling of NO2, EC, OC, TC, RD, size-fractioned mass concentration, and particle number were conducted. The personal and stationary measurements were conducted on threeoccasions simultaneously. The workers measured their exposure by repeated self-administered measurements of NO2. The self-administered measurements were performed twice for each worker with at least one month lag between the samplings. Results: In the simultaneous sampling of diesel exhaust, the geometric mean (GM) concentration of NO2 and respirable EC were 72 μg m−3 (10th–90th percentile 34–140 μg m−3) and 2.6 μg m−3 (10th–90th percentile 1.6–7.3 μg m−3), respectively. The GM for OC and TC was 28 μg m−3 (10th–90th percentile 20–42 μg m−3) and 31 μg m−3 (10th–90th percentile 20–50 μg m−3), respectively. The GM for RD and particle number was 180 μg m−3 (10th–90th percentile 20–530 μg m−3) and 47 900 cm−3 (10th–90th percentile (27 500–94 100 cm−3), respectively. A significant correlation was found between NO2 and respirable EC [Spearman’s correlation r = 0.53 (P = 0.05)]. The within-worker variability of NO2 was 45.5% and the between-worker variability was 54.5%. The self-administered measured concentrations of NO2 (GM 70 μg m−3) did not statistically differ from the NO2 concentrations measured by an expert (P > 0.35).Conclusion: The diesel exhaust exposure in tunnel construction work was low. A significant correlation between NO2 and EC was observed. This indicates that NO2 could be used as a proxy for diesel exhaust in tunnel work if diesel exhaust is the only source of NO2 and if the ratio between EC and NO2 is known and constant. Passive sampling of NO2 is much easier and cheaper to perform compared with active sampling of EC. It is possible to utilize self-administered NO2 measurements in extreme and inaccessible work environments. This study adds support to continued use of NO2 as an exposure marker in combination with EC for diesel exhaust exposure. In tunnel construction work, the variability in the diesel exhaust exposure was high both between- and within-workers.
|
|
| 34. |
- Hemmingsen, Jette Gjerke, et al.
(författare)
-
Controlled exposure to diesel exhaust and traffic noise - Effects on oxidative stress and activation in mononuclear blood cells.
- 2015
-
Ingår i: Mutation Research - Fundamental and Molecular Mechanisms of Mutagenesis. - : Elsevier BV. - 1879-2871 .- 0027-5107. ; 775, s. 66-71
-
Tidskriftsartikel (refereegranskat)abstract
- Particulate air pollution increases risk of cancer and cardiopulmonary disease, partly through oxidative stress. Traffic-related noise increases risk of cardiovascular disease and may cause oxidative stress. In this controlled random sequence study, 18 healthy subjects were exposed for 3h to diesel exhaust (DE) at 276μg/m(3) from a passenger car or filtered air, with co-exposure to traffic noise at 48 or 75dB(A). Gene expression markers of inflammation, (interleukin-8 and tumor necrosis factor), oxidative stress (heme oxygenase (decycling-1)) and DNA repair (8-oxoguanine DNA glycosylase (OGG1)) were unaltered in peripheral blood mononuclear cells (PBMCs). No significant differences in DNA damage levels, measured by the comet assay, were observed after DE exposure, whereas exposure to high noise levels was associated with significantly increased levels of hOGG1-sensitive sites in PBMCs. Urinary levels of 8-oxo-7,8-dihydro-2'-deoxyguanosine were unaltered. In auxiliary ex vivo experiments whole blood was incubated with particles from the exposure chamber for 3h without effects on DNA damage in PBMCs or intracellular reactive oxygen species production and expression of CD11b and CD62L adhesion molecules in leukocyte subtypes.
|
|
| 35. |
|
|
| 36. |
|
|
| 37. |
- Isaxon, Christina, et al.
(författare)
-
A Novel System for Source Characterization and Controlled Human Exposure to Nanoparticle Aggregates Generated During Gas–Metal Arc Welding
- 2013
-
Ingår i: Aerosol Science and Technology. - : Informa UK Limited. - 1521-7388 .- 0278-6826. ; 47:1, s. 52-59
-
Tidskriftsartikel (refereegranskat)abstract
- Abstract in Undetermined The aim of this study was to achieve a method to perform detailed characterization and human exposure studies of nanosized and nanostructured aerosol particles. The source chosen was mild steel, active gas, arc welding fume. The setup consisted of a generation chamber, where welding can be performed, connected to an airtight stainless steel 22 m(3) exposure chamber. Instrumentation, consisting of a tapered element oscillating microbalance, a scanning mobility particle sizer, and a sampler for electron microscopy and particle-induced X-ray emission analysis was connected to the stainless steel chamber. The feasibility of the system for human exposure studies was evaluated by exposing 31 human volunteers, in groups of three, to a test aerosol containing 1 mg/m(3) welding fumes and to conditioned, filtered air. The results show that an aerosol that accurately represents dilute welding fume exposures that occur in workplaces can be produced in a controlled manner, and that the experimental setup can be used for 6 h, double-blind, exposures of human subjects. Particle mass concentration levels could be varied from <5 mu g/m(3) to more than 1000 mu g/m(3). Fumes from metal active gas welding showed a unimodal size distribution with a mean mobility diameter of 160 nm, transmission electron microscopy showed aggregates with a clearly nanosized structure.
|
|
| 38. |
- Isaxon, Christina, et al.
(författare)
-
Contribution of indoor-generated particles to residential exposure
- 2015
-
Ingår i: Atmospheric Environment. - : Elsevier BV. - 1352-2310 .- 1873-2844. ; 106, s. 458-466
-
Tidskriftsartikel (refereegranskat)abstract
- The majority of airborne particles in residences, when expressed as number concentrations, are generated by the residents themselves, through combustion/thermal related activities. These particles have a considerably smaller diameter than 2.5 mu m and, due to the combination of their small size, chemical composition (e.g. soot) and intermittently very high concentrations, should be regarded as having potential to cause adverse health effects. In this study, time resolved airborne particle measurements were conducted for seven consecutive days in 22 randomly selected homes in the urban area of Lund in southern Sweden. The main purpose of the study was to analyze the influence of human activities on the concentration of particles in indoor air. Focus was on number concentrations of particles with diameters <300 nm generated by indoor activities, and how these contribute to the integrated daily residential exposure. Correlations between these particles and soot mass concentration in total dust were also investigated. It was found that candle burning and activities related to cooking (using a frying pan, oven, toaster, and their combinations) were the major particle sources. The frequency of occurrence of a given concentration indoors and outdoors was compared for ultrafine particles. Indoor data was sorted into non-occupancy and occupancy time, and the occupancy time was further divided into non-activity and activity influenced time. It was found that high levels (above 10(4) cm(-3)) indoors mainly occur during active periods of occupancy, while the concentration during non-activity influenced time differs very little from non-occupancy time. Total integrated daily residential exposure of ultrafine particles was calculated for 22 homes, the contribution from known activities was 66%, from unknown activities 20%, and from background/non-activity 14%. The collected data also allowed for estimates of particle source strengths for specific activities, and for some activities it was possible to estimate correlations between the number concentration of ultrafine particles and the mass concentration of soot in total dust in 10 homes. Particle source strengths (for 7 specific activities) ranged from 1.6.10(12) to 4.5.10(12) min(-1). The correlation between ultrafine particles and mass concentration of soot in total dust varied between 0.37 and 0.85, with an average of 0.56 (Pearson correlation coefficient). This study clearly shows that due to the importance of indoor sources, residential exposure to ultrafine particles cannot be characterized by ambient measurements alone. (C) 2014 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/3.0/).
|
|
| 39. |
|
|
| 40. |
|
|
