SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Wennerberg Ann 1955 ) ;lar1:(gu);mspu:(article)"

Sökning: WFRF:(Wennerberg Ann 1955 ) > Göteborgs universitet > Tidskriftsartikel

  • Resultat 21-30 av 114
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
21.
  • Alenezi, Ali, et al. (författare)
  • Osseointegration effects of local release of strontium ranelate from implant surfaces in rats
  • 2019
  • Ingår i: Journal of Materials Science: Materials in Medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 30:10, s. 116-
  • Tidskriftsartikel (refereegranskat)abstract
    • BACKGROUND : Numerous studies have reported the beneficial effects of strontium on bone growth, particularly by stimulating osteoblast proliferation and differentiation. Thus, strontium release around implants has been suggested as one possible strategy to enhance implant osseointegration. AIM : This study aimed to evaluate whether the local release of strontium ranelate (Sr-ranelate) from implants coated with mesoporous titania could improve bone formation around implants in an animal model. MATERIALS AND METHODS : Mesoporous titania (MT) thin coatings were formed utilizing the evaporation induced self-assembly (EISA) method using Pluronic (P123) with or without the addition of poly propylene glycol (PPG) to create materials with two different pore sizes. The MT was deposited on disks and mini-screws, both made of cp Ti grade IV. Scanning electron microscopy (SEM) was performed to characterize the MT using a Leo Ultra55 FEG instrument (Zeiss, Oberkochen, Germany). The MT was loaded with Sr-ranelate using soaking and the drug uptake and release kinetics to and from the surfaces were evaluated using quartz crystal microbalance with dissipation monitoring (QCM-D) utilizing a Q-sense E4 instrument. For the in vivo experiment, 24 adult rats were analyzed at two time points of implant healing (2 and 6 weeks). Titanium implants shaped as mini screws were coated with MT films and divided into two groups; supplied with Sr-ranelate (test group) and without Sr-ranelate (control group). Four implants (both test and control) were inserted in the tibia of each rat. The in vivo study was evaluated using histomorphometric analyses of the implant/bone interphase using optical microscopy. RESULTS : SEM images showed the successful formation of evenly distributed MT films covering the entire surface with pore sizes of 6 and 7.2 nm, respectively. The QCM-D analysis revealed an absorption of 3300 ng/cm2 of Sr-ranelate on the 7.2 nm MT, which was about 3 times more than the observed amount on the 6 nm MT (1200 ng/cm2). Both groups showed sustained release of Sr-ranelate from MT coated disks. The histomorphometric analysis revealed no significant differences in bone implant contact (BIC) and bone area (BA) between the implants with Sr-ranelate and implants in the control groups after 2 and 6 weeks of healing (BIC with a p-value of 0.43 after 2 weeks and 0.172 after 6 weeks; BA with a p-value of 0.503 after 2 weeks, and 0.088 after 6 weeks). The mean BIC and BA values within the same group showed significant increase among all groups between 2 and 6 weeks. CONCLUSION : This study could not confirm any positive effects of Sr-ranelate on implant osseointegration.
  •  
22.
  • Andersson, M., et al. (författare)
  • Using optical tweezers for measuring the interaction forces between human bone cells and implant surfaces: System design and force calibration
  • 2007
  • Ingår i: Rev Sci Instrum. - : AIP Publishing. ; 78:7
  • Tidskriftsartikel (refereegranskat)abstract
    • Optical tweezers were used to study the interaction and attachment of human bone cells to various types of medical implant materials. Ideally, the implant should facilitate cell attachment and promote migration of the progenitor cells in order to decrease the healing time. It is therefore of interest, in a controlled manner, to be able to monitor the cell adhesion process. Results from such studies would help foresee the clinical outcome of integrating medical implants. The interactions between two primary cell culture models, human gingival fibroblasts and bone forming human osteoblast cells, and three different implant materials, glass, titanium, and hydroxyapatite, were studied. A novel type of optical tweezers, which has a newly designed quadrant detector and a powerful 3 W laser was constructed and force calibrated using two different methods: one method in which the stiffness of the optical trap was obtained by monitoring the phase lag between the trap and the moved object when imposing a forced oscillation on the trapped object and another method in which the maximum trapping force was derived from the critical velocity at which the object escapes the trap. Polystyrene beads as well as cells were utilized for the calibrations. This is the first time that cells have been used directly for these types of force calibrations and, hence, direct measurements of forces exerted on cells can be performed, thus avoiding the difficulties often encountered when translating the results obtained from cell measurements to the calibrations obtained with reference materials. This more straightforward approach represents an advantage in comparison to established methods.
  •  
23.
  • Arvidsson, Anna, 1973, et al. (författare)
  • Characterisation of structures in salivary secretion film formation. An experimental study with atomic force microscopy
  • 2004
  • Ingår i: Biofouling. - : Informa UK Limited. - 0892-7014 .- 1029-2454. ; 20:3, s. 181-8
  • Tidskriftsartikel (refereegranskat)abstract
    • The purpose of the present study was to characterise the structure dynamics of pure salivary secretions retained on controlled surfaces with different surface energies in the early stage of salivary film formation. Germanium prisms prepared to have either low surface energy or medium surface energy were incubated in fresh secretions of either human parotid saliva (HPS) or human submandibular/sublingual saliva (HSMSLS) for 15, 90, and 180 min. After controlled rinsing with distilled water, the surfaces were air dried and thereafter imaged with atomic force microscopy (AFM). The amount of adsorbed material and the size of the structures detected increased with increased saliva exposure time. The film thicknesses varied from 10 to 150 nm, and both HPS and HSMSLS films contained structures with diameters varying from 40 nm to 2 microm. Some of these were clustered into special formations. The HPS films exhibited a more granular morphology than the HSMSLS films. Furthermore, branched lines were detected on the low surface energy germanium prisms incubated in saliva. The results indicate that exposure time, surface energy, and type of salivary secretion all are factors affecting the adsorption characteristics of salivary films.
  •  
24.
  • Arvidsson, Anna, 1973, et al. (författare)
  • Formation of calcium phosphates on titanium implants with four different bioactive surface preparations. An in vitro study
  • 2007
  • Ingår i: Journal of Materials Science-Materials in Medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 18:10, s. 1945-1954
  • Tidskriftsartikel (refereegranskat)abstract
    • The aim of the present study was to compare the nucleating and growing behaviour on four types of bioactive surfaces by using the simulated body fluid (SBF) model. Titanium discs were blasted and then prepared by alkali and heat treatment, anodic oxidation, fluoridation, or hydroxyapatite coating. The discs were immersed in SBF for 1, 2, 4 and 6 weeks. Calcium phosphates were found on all specimens, as analysed with scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDX). After 1 and 2 weeks of SBF immersion more titanium was accessible with SEM/EDX on the blasted surfaces than the four bioactive surface types, indicating a difference in coverage by calcium phosphates. The Ca/P mean ratio of the surfaces was approximately 1.5 after 1 week, in contrast to the fluoridated specimens which displayed a Ca/P mean ratio of approximately 2. Powder X-ray diffraction (P-XRD) analyses showed the presence of hydroxyapatite on all types of surfaces after 4 and 6 weeks of immersion. The samples immersed for 6 weeks showed a higher degree of crystallinity than the samples immersed for 4 weeks. In conclusion, differences appeared at the early SBF immersion times of 1 and 2 weeks between controls and bioactive surface types, as well as between different bioactive surface types.
  •  
25.
  • Arvidsson, Anna, 1973, et al. (författare)
  • Influence of chemo-mechanical caries removal on the surface topography of dental composite resin and glass-ionomer materials: an in vitro study
  • 2004
  • Ingår i: Acta Odontologica Scandinavica. ; 62:3, s. 137-142
  • Tidskriftsartikel (refereegranskat)abstract
    • The aim of the present study was to investigate the influence of a chemo-mechanical caries removal system, Carisolv gel, on the surface topography of dental filling materials. Thirty specimens of a composite resin (Spectrum) and a compomer (Dyract AP) and 60 specimens of a glass-ionomer (Ketac-Fil Plus) were prepared. The surface topography was investigated with an optical interferometer before and after chemical exposure for 5, 10, or 20 min. Each specimen acted as its own control. The topographical part of the glass-ionomer materials was performed in two series with different drying procedures, since this material exhibits a higher sensitivity to dehydration than the other materials. The surface topographical investigations were complemented with contact angle measurements. After Carisolv gel exposure the density of summits and the developed surface area ratio (3D/2D) were slightly smaller for the composite resin and the compomer. For the minimally dried glass-ionomer material, the results indicated a reduction of the height of the surface structures, as well as a surface area enlargement, after Carisolv gel exposure. No statistically significant changes of contact angles due to Carisolv gel exposure could be detected for any material investigated. If dental filling materials of composite resin or glass-ionomer materials are exposed to Carisolv gel, no or only minor surface topographical changes can be expected.
  •  
26.
  • Arvidsson, Anna, 1973, et al. (författare)
  • The role of functional parameters for topographical characterization of bone-anchored implants
  • 2006
  • Ingår i: Clin Implant Dent Relat Res. ; 8:2, s. 70-6
  • Tidskriftsartikel (refereegranskat)abstract
    • BACKGROUND: The surface topographical characterization of bone-anchored implants has been recommended to be based on amplitude, spatial, and hybrid parameters. There are also functional parameters that have the potential to describe characteristics important for a specific application. PURPOSE: The aim of the present study was to evaluate if parameters that have been described as functional in engineering applications are also relevant in the topographical characterization of bone-anchored implants. MATERIALS AND METHODS: The surface topography of threaded titanium implants with different surface roughness (S(a), S(ds), and S(dr)) was analyzed with an optical interferometer, and five candidating functional parameters (S(bi), S(ci), S(vi), S(m), and S(c)) were calculated. Examples of the same parameters for five commercially available dental implants were also calculated. Results The highest core fluid retention index (S(ci)) was displayed by the turned implants, followed by fixtures blasted with 250- and 25-microm particles, respectively. Fixtures blasted with 75-microm Al(2)O(3) particles displayed the lowest S(ci) value. This is the inverse order of the bone biological ranking based on earlier in vivo studies with the experimental surfaces included in the present study. CONCLUSION: A low core fluid retention index (S(ci)) seems favorable for bone-anchored implants. Therefore, it is suggested to include S(ci) to the set of topographical parameters for bone-anchored implants to possibly predict the biological outcome.
  •  
27.
  • Braian, Michael, et al. (författare)
  • Trueness and precision of 5 intraoral scanners for scanning edentulous and dentate complete-arch mandibular casts: A comparative in vitro study
  • 2019
  • Ingår i: Journal of Prosthetic Dentistry. - : Elsevier BV. - 0022-3913 .- 1097-6841. ; 122:2, s. 129-136
  • Tidskriftsartikel (refereegranskat)abstract
    • Statement of problem. Limited information is available on the trueness and precision of intraoral scanners (IOSs) for scanning dentate and edentulous casts. Purpose. The purpose of this in vitro study was to evaluate the trueness and precision of 5 different IOS devices for scanning a dentate and an edentulous cast in a standardized way for short arches and complete arches. Material and methods. Five IOS devices were used to scan 2 computer metric measured casts using a coordinate measuring machine (CMM). Both were scanned 15 times. All scans were carried out by 1 experienced operator in a standardized way. One cast was edentulous, and 1 was dentate. Five cylindrical landmarks were added to each cast. These cylinders made the measurement of point-to-point distances possible, dividing the tests into cross-arch measurements and intercylindrical (short-arch) measurements. The Student t test, Mann-Whitney test, and Levene test for equality were used to calculate the difference between the edentulous and dentate scans for both cross-arch and intercylindrical measurements (alpha=.05). Results. For the cross-arch measurements on the edentulous scans, the trueness values ranged between 6 mu m (Emerald P1-P2) and 193 mu m (Omnicam P1-P5) and for the intercylindrical measurements, between 2 mu m (Itero P4-P5) and -103 mu m (CS 3600 P1-P2). For the dentate cast, the cross-arch trueness values ranged between 6 mu m (CS 3600 P1-P2) and 150 mu m (TRIOS 3 P1-P5) and for the intercylindrical measurements, between 4 mu m (Itero P4-P5) and -56 mu m (Emerald P4-P5). Conclusions. Significant differences were found in scanning edentulous and dentate scans for short arches and complete arches. Trueness for complete-arch scans were <193 mu m for edentulous scans and <150 mu m for dentate scans. Trueness for short-arch scans were <103 mu m for edentulous scans and <56 mu m for dentate scans.
  •  
28.
  • Bruns, S., et al. (författare)
  • On the material dependency of peri-implant morphology and stability in healing bone
  • 2023
  • Ingår i: Bioactive Materials. - : Elsevier. - 2452-199X. ; 28, s. 155-166
  • Tidskriftsartikel (refereegranskat)abstract
    • The microstructural architecture of remodeled bone in the peri-implant region of screw implants plays a vital role in the distribution of strain energy and implant stability. We present a study in which screw implants made from titanium, polyetheretherketone and biodegradable magnesium-gadolinium alloys were implanted into rat tibia and subjected to a push-out test four, eight and twelve weeks after implantation. Screws were 4 mm in length and with an M2 thread. The loading experiment was accompanied by simultaneous three-dimensional imaging using synchrotron-radiation microcomputed tomography at 5 mu m resolution. Bone deformation and strains were tracked by applying optical flow-based digital volume correlation to the recorded image sequences. Implant stabilities measured for screws of biodegradable alloys were comparable to pins whereas non-degradable biomaterials experienced additional mechanical stabilization. Peri-implant bone morphology and strain transfer from the loaded implant site depended heavily on the biomaterial utilized. Titanium implants stimulated rapid callus formation displaying a consistent monomodal strain profile whereas the bone volume fraction in the vicinity of magnesium-gadolinium alloys exhibited a minimum close to the interface of the implant and less ordered strain transfer. Correlations in our data suggest that implant stability benefits from disparate bone morphological properties depending on the biomaterial utilized. This leaves the choice of biomaterial as situational depending on local tissue properties.
  •  
29.
  • Chrcanovic, Bruno, et al. (författare)
  • Bruxism and dental implant treatment complications: a retrospective comparative study of 98 bruxer patients and a matched group.
  • 2017
  • Ingår i: Clinical oral implants research. - : Wiley. - 1600-0501 .- 0905-7161. ; 28:7, s. e1-e9
  • Tidskriftsartikel (refereegranskat)abstract
    • Objectives To analyze the complications of dental implant treatment in a group of patients with bruxism in comparison with a matched group of non‐bruxers. Material and methods Patients being diagnosed as bruxers were identified within a group of patients consecutively treated with implant‐supported prostheses at one specialist clinic, based on the most recent listed sign and symptoms of bruxism according to the International Classification of Sleep Disorders. A diagnostic grading system of “possible,” “probable,” and “definite” sleep or awake bruxism was used, according to a recent published international consensus. A case–control matching model was used to match the bruxers with a group of non‐bruxers, based on five variables. Implant‐, prosthetic‐, and patient‐related data were collected, as well as 14 mechanical complications, and compared between groups. Results Ninety‐eight of 2670 patients were identified as bruxers. The odds ratio of implant failure in bruxers in relation to non‐bruxers was 2.71 (95% CI 1.25, 5.88). Considering the same number of patients with the same total number of implants equally distributed between groups, the bruxers group had a higher prevalence of mechanical complications in comparison with the non‐bruxers group. Conclusions This study suggests that bruxism may significantly increase both the implant failure rate and the rate of mechanical and technical complications of implant‐supported restorations. Other risk factors may also have influenced the results.
  •  
30.
  • Chrcanovic, Bruno, et al. (författare)
  • Bruxism and Dental Implants: A Meta-Analysis.
  • 2015
  • Ingår i: Implant dentistry. - : Lippincott Williams & Wilkins. - 1538-2982 .- 1056-6163. ; 24:5
  • Tidskriftsartikel (refereegranskat)abstract
    • To test the null hypothesis of no difference in the implant failure rates, postoperative infection, and marginal bone loss after the insertion of dental implants in bruxers compared with the insertion in non-bruxers against the alternative hypothesis of a difference.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 21-30 av 114
Typ av publikation
Typ av innehåll
refereegranskat (113)
övrigt vetenskapligt/konstnärligt (1)
Författare/redaktör
Wennerberg, Ann, 195 ... (111)
Albrektsson, Tomas, ... (44)
Franke Stenport, Vic ... (13)
Galli, Silvia (10)
Johansson, Carina B. ... (10)
Sul, Young-Taeg, 196 ... (9)
visa fler...
Andersson, Martin, 1 ... (9)
Arvidsson, Anna, 197 ... (9)
Chrcanovic, Bruno (8)
Meirelles, Luiz, 197 ... (8)
Kjellin, Per, 1972 (8)
Tengvall, Pentti (7)
Toia, Marco (6)
Jemt, Torsten, 1950 (5)
Currie, Fredrik, 197 ... (5)
Jimbo, Ryo (4)
Albrektsson, Tomas (4)
Sennerby, Lars, 1960 (4)
Kjellin, P (4)
Stocchero, Michele (4)
Hammarström Johansso ... (4)
Becktor, Jonas P (4)
Berglundh, Tord, 195 ... (3)
Lindhe, Jan, 1935 (3)
Larsson, Christel (3)
Thomsen, Peter, 1953 (3)
Wennerberg, Ann (3)
Reinedahl, David (3)
Trindade, Ricardo (3)
Jimbo, Ryo, 1979 (3)
Östman, Pär-Olov, 19 ... (3)
Gretzer, Christina, ... (3)
Willumeit-Romer, R. (3)
Kruger, D. (3)
Abrahamsson, Ingemar ... (2)
Zitzmann, Nicola, 19 ... (2)
Johansson, Pär, 1986 (2)
Mustafa, Kamal (2)
Jacobsson, Magnus (2)
Emanuelsson, Lena, 1 ... (2)
Mustafa, K. (2)
Örtengren, Ulf, 1959 (2)
Milleding, Percy, 19 ... (2)
Örtorp, Anders, 1964 (2)
Hjalmarsson, Lars, 1 ... (2)
Barkarmo, Sargon (2)
Hoffman, Maria, 1964 (2)
Peruzzi, Niccolò (2)
Prgomet, Zdenka (2)
Braian, Michael (2)
visa färre...
Lärosäte
Malmö universitet (49)
Chalmers tekniska högskola (14)
Uppsala universitet (2)
Örebro universitet (2)
Linköpings universitet (2)
visa fler...
Karolinska Institutet (1)
visa färre...
Språk
Engelska (114)
Forskningsämne (UKÄ/SCB)
Medicin och hälsovetenskap (114)
Teknik (11)
Naturvetenskap (1)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy