| 1. |
- Edison, Henry, et al.
(författare)
-
Towards innovation measurement in the software industry
- 2013
-
Ingår i: Journal of Systems and Software. - : Elsevier. - 0164-1212. ; 86:5, s. 1390-1407
-
Tidskriftsartikel (refereegranskat)abstract
- In today's highly competitive business environments with shortened product and technology life cycle, it is critical for software industry to continuously innovate. This goal can be achieved by developing a better understanding and control of the activities and determinants of innovation. Innovation measurement initiatives assess innovation capability, output and performance to help develop such an understanding. This study explores various aspects relevant to innovation measurement ranging from definitions, measurement frameworks and metrics that have been proposed in literature and used in practice. A systematic literature review followed by an online questionnaire and interviews with practitioners and academics were employed to identify a comprehensive definition of innovation that can be used in software industry. The metrics for the evaluation of determinants, inputs, outputs and performance were also aggregated and categorised. Based on these findings, a conceptual model of the key measurable elements of innovation was constructed from the findings of the systematic review. The model was further refined after feedback from academia and industry through interviews.
|
|
| 2. |
- Erovic Ademovski, Seida, et al.
(författare)
-
The short-term treatment effects on the microbiota at the dorsum of the tongue in intra-oral halitosis patients-a randomized clinical trial.
- 2013
-
Ingår i: Clinical oral investigations. - : Springer Science and Business Media LLC. - 1436-3771 .- 1432-6981. ; 17:2, s. 463-473
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVES: This study aims to assess the effects of rinsing with zinc- and chlorhexidine-containing mouth rinse with or without adjunct tongue scraping on volatile sulfur compounds (VSCs) in breath air, and the microbiota at the dorsum of the tongue. MATERIAL AND METHODS: A randomized single-masked controlled clinical trial with a cross-over study design over 14 days including 21 subjects was performed. Bacterial samples from the dorsum of the tongue were assayed by checkerboard DNA-DNA hybridization. RESULTS: No halitosis (identified by VSC assessments) at day 14 was identified in 12/21 subjects with active rinse alone, in 10/21with adjunct use of tongue scraper, in 1/21 for negative control rinse alone, and in 3/21 in the control and tongue scraping sequence. At day 14, significantly lower counts were identified only in the active rinse sequence (p < 0.001) for 15/78 species including, Fusobacterium sp., Porphyromonas gingivalis, Pseudomonas aeruginosa, Staphylococcus aureus, and Tannerella forsythia. A decrease in bacteria from baseline to day 14 was found in successfully treated subjects for 9/74 species including: P. gingivalis, Prevotella melaninogenica, S. aureus, and Treponema denticola. Baseline VSC scores were correlated with several bacterial species. The use of a tongue scraper combined with active rinse did not change the levels of VSC compared to rinsing alone. CONCLUSIONS: VSC scores were not associated with bacterial counts in samples taken from the dorsum of the tongue. The active rinse alone containing zinc and chlorhexidine had effects on intra-oral halitosis and reduced bacterial counts of species associated with malodor. Tongue scraping provided no beneficial effects on the microbiota studied. CLINICAL RELEVANCE: Periodontally healthy subjects with intra-oral halitosis benefit from daily rinsing with zinc- and chlorhexidine-containing mouth rinse.
|
|
| 3. |
- Nidhra, Srinivas, et al.
(författare)
-
Knowledge transfer challenges and mitigation strategies in global software development : A systematic literature review and industrial validation
- 2013
-
Ingår i: International Journal of Information Management. - : Elsevier. - 0268-4012 .- 1873-4707. ; 33:2, s. 333-355
-
Tidskriftsartikel (refereegranskat)abstract
- In this article we considered knowledge transfer (KT) in global software development (GSD) from two perspectives, state-of-the-art and state-of-the-practice, in order to identify what are the challenges that hamper the success of KT in global software teams, as well as to find out what are the mitigation strategies that can be used to overcome such challenges. The overall aim of this work is to provide a body of knowledge for enabling successful KT in GSD settings. This is achieved by an in-depth understanding of KT challenges and mitigation strategies, both from the perspective of literature and industry. It also identifies the similarities and differences in challenges and strategies gathered from literature studies and industrial experts.
|
|
| 4. |
- Radjenovic, D., et al.
(författare)
-
Software fault prediction metrics: A systematic literature review
- 2013
-
Ingår i: Information and Software Technology. - : Elsevier BV. - 0950-5849 .- 1873-6025. ; 55:8, s. 1397-1418
-
Tidskriftsartikel (refereegranskat)abstract
- Context: Software metrics may be used in fault prediction models to improve software quality by predicting fault location. Objective: This paper aims to identify software metrics and to assess their applicability in software fault prediction. We investigated the influence of context on metrics' selection and performance. Method: This systematic literature review includes 106 papers published between 1991 and 2011. The selected papers are classified according to metrics and context properties. Results: Object-oriented metrics (49%) were used nearly twice as often compared to traditional source code metrics (27%) or process metrics (24%). Chidamber and Kemerer's (CK) object-oriented metrics were most frequently used. According to the selected studies there are significant differences between the metrics used in fault prediction performance. Object-oriented and process metrics have been reported to be more successful in finding faults compared to traditional size and complexity metrics. Process metrics seem to be better at predicting post-release faults compared to any static code metrics. Conclusion: More studies should be performed on large industrial software systems to find metrics more relevant for the industry and to answer the question as to which metrics should be used in a given context.
|
|
| 5. |
- Riņķevič, Kaspars, et al.
(författare)
-
Equality in cumulative voting : A systematic review with an improvement proposal
- 2013
-
Ingår i: Information and Software Technology. - : Elsevier. - 0950-5849 .- 1873-6025. ; 55:2, s. 267-287
-
Tidskriftsartikel (refereegranskat)abstract
- Context: Prioritization is an essential part of requirements engineering, software release planning and many other software engineering disciplines. Cumulative Voting (CV) is known as a relatively simple method for prioritizing requirements on a ratio scale. Historically, CV has been applied in decision-making in government elections, corporate governance, and forestry. However, CV prioritization results are of a special type of data-compositional data. Objectives: The purpose of this study is to aid decision-making by collecting knowledge on the empirical use of CV and develop a method for detecting prioritization items with equal priority. Methods: We present a systematic literature review of CV and CV analysis methods. The review is based on searching electronic databases and snowball sampling of the found primary studies. Relevant studies are selected based on titles, abstracts, and full text inspection. Additionally, we propose Equality of Cumulative Votes (ECVs)-a CV result analysis method that identifies prioritization items with equal priority. Results: CV has been used in not only requirements prioritization and release planning but also in e.g. software process improvement, change impact analysis and model driven software development. The review presents a collection of state of the practice studies and CV result analysis methods. In the end, ECV was applied to 27 prioritization cases from 14 studies and identified nine groups of equal items in three studies. Conclusions: We believe that the analysis of the collected studies and the CV result analysis methods can help in the adoption of CV prioritization method. The evaluation of ECV indicates that it is able to detect prioritization items with equal priority and thus provide the practitioner with a more fine-grained analysis.
|
|
| 6. |
- Rogstad, Erik, et al.
(författare)
-
Test case selection for black-box regression testing of database applications
- 2013
-
Ingår i: Information and Software Technology. - : Elsevier BV. - 0950-5849 .- 1873-6025. ; 55:10
-
Tidskriftsartikel (refereegranskat)abstract
- Context: This paper presents an approach for selecting regression test cases in the context of large-scale, database applications. We focus on a black-box (specification-based) approach, relying on classification tree models to model the input domain of the system under test (SUT), in order to obtain a more practical and scalable solution. We perform an industrial case study where the SUT is a large database application in Norway’s tax department. Objective: We investigate the use of similarity-based test case selection for supporting black box regression testing of database applications. We have developed a practical approach and tool (DART) for functional black-box regression testing of database applications. In order to make the regression test approach scalable for large database applications, we needed a test case selection strategy that reduces the test execution costs and analysis effort. We used classification tree models to partition the input domain of the SUT in order to then select test cases. Rather than selecting test cases at random from each partition, we incorporated a similarity-based test case selection, hypothesizing that it would yield a higher fault detection rate. Method: An experiment was conducted to determine which similarity-based selection algorithm was the most suitable in selecting test cases in large regression test suites, and whether similarity-based selection was a worthwhile and practical alternative to simpler solutions. Results: The results show that combining similarity measurement with partition-based test case selection, by using similarity-based test case selection within each partition, can provide improved fault detection rates over simpler solutions when specific conditions are met regarding the partitions. Conclusions: Under the conditions present in the experiment the improvements were marginal. However, a detailed analysis concludes that the similarity-based selection strategy should be applied when a large number of test cases are contained in each partition and there is significant variability within partitions. If these conditions are not present, incorporating similarity measures is not worthwhile, since the gain is negligible over a random selection within each partition.
|
|
| 7. |
- Schneider, S., et al.
(författare)
-
Solutions in global software engineering: A systematic literature review
- 2013
-
Ingår i: International Journal of Information Management. - : Elsevier BV. - 0268-4012 .- 1873-4707. ; 33:1, s. 119-132
-
Tidskriftsartikel (refereegranskat)abstract
- Global software engineering (GSE) has received increased attention, as globalization enables and encourages increased distribution of product development. Many empirical studies and systematic literature reviews (SLRs) focus on the identification of challenges, this paper however presents the first SLR collecting and analyzing solutions associated with GSE, while also evaluating the level of empirical validation of said solutions. As a starting point the paper presents a GSE model, designed to categorize solutions into process areas, useful for the analysis of the research community's contributions to state-of-the-art and identifying fundamental gaps in research. In addition, the model categorizing the solutions is populated with references and good-examples, useful for practitioners, which can use the model to find solutions to overall challenges in various process areas. The overall results of the systematic review revealed more than 330 papers containing 127 solutions that were then identified and mapped to the model. The process areas of project management are highly populated, while other areas like product integration have received surprisingly little attention. In addition, selected process area is elaborated upon in terms of contents and deficiencies.
|
|
| 8. |
- Woxenius, Johan, 1967, et al.
(författare)
-
Utilising more of the loading space in intermodal line trains – measures and decision support
- 2013
-
Ingår i: Computers in industry. - : Elsevier BV. - 0166-3615 .- 1872-6194. ; 64:2, s. 146-154
-
Tidskriftsartikel (refereegranskat)abstract
- The focus of this article is to identify, characterise and qualitatively evaluate the existing measures for increasing the utilisation of loading space in intermodal road-rail freight line trains. Normally, these trains operate like intercity passenger trains, because they make short unit load transhipment stops along rail corridors in order to travel comparatively small and short flows. The measures for loading space utilisation include adapting the train’s capacity, changing the departure times, altering the train routes and sending trucks to different terminals as well as replacing rail transport with trucks. Some of the measures require improved information sharing, and executives can strengthen the effect of the measures by adding decision support systems and price incentives to transport buyers.
|
|
