| 1. |
- Xu, Hong-Tao, et al.
(författare)
-
Effects of fucosylated milk of goat and mouse on Helicobacter pylori binding to Lewis b antigen
- 2004
-
Ingår i: World Journal of Gastroenterology. - Beijing : WJG Press. - 1007-9327 .- 2219-2840. ; 10:14, s. 2063-2066
-
Tidskriftsartikel (refereegranskat)abstract
- Aim:To evaluate the effects of animal milk containing fucosylated antigens on Helicobacter pylori (H pylon) binding to Lewis b antigen. Methods:A mammary gland expression vector containing human α1-3/4-fucosyltransferase cDNA sequences was constructed. Transient expression of human(α1-3/4-fucosyltransferase cDNA in goat mammary cell and establishment of transgenic mice were performed. The adhesion inhibitory properties of milk samples were analyzed by using Hpylori. Results: Goat milk samples were found to inhibit bacterial binding to Lewis b antigen. The highest inhibition was observed 42 h after injection of the plasmid. The binding activity of Hpylori to Lewis b antigen reduced mostly, by 83%, however milk samples from transgenic mice did not inhibit Hpylori binding to Lewis b antigen. Conclusion: The use of “humanized“ animal milk produced by the transgenic introduction of fucosylated antigen can perhaps provide an alternative therapy and preventive measure for Hpylori infection.
|
|
| 2. |
- Agde Tjernlund, Jessica, et al.
(författare)
-
Influence of molecular weight on strain-gradient yielding in polystyrene
- 2004
-
Ingår i: Polymer Engineering and Science. - : Wiley. - 0032-3888 .- 1548-2634. ; 44:10, s. 1987-1997
-
Tidskriftsartikel (refereegranskat)abstract
- Experimental observations have indicated that the presence of strain gradients has an influence on the inelastic behavior of polymers as well as in other materials such as ceramics and metals. The present study has experimentally quantified length-scale effects in inelastic deformations of the polymer material polystyrene (PS) with respect to the molecular length. The experimental technique that has been used is nano-indentation to various depths with a Berkovich indenter. The hardness has been calculated with the method by Oliver and Pharr, and also by direct measurements of the area from atomic force microscopy. The experiments showed that the length-scale effects in inelastic deformations exist in polystyrene at ambient conditions. The direct method gave a smaller hardness than the Oliver-Pharr method. It was also shown that the length-scale parameter according to Nix and Gao increases with increasing molecular weight. For high molecular weights above a critical value of entanglement, there was no pertinent increase in the length-scale parameter. The length-scale parameter for strain-gradient plasticity has a size of around 0.1 μm for polystyrene.
|
|
| 3. |
- Dozmorov, Mikhail, 1973, et al.
(författare)
-
Slowly developing depression of N-methyl-D-aspartate receptor mediated responses in young rat hippocampi.
- 2004
-
Ingår i: BMC neuroscience. - : Springer Science and Business Media LLC. - 1471-2202. ; 5:1
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Activation of N-methyl-D-aspartate (NMDA) type glutamate receptors is essential in triggering various forms of synaptic plasticity. A critical issue is to what extent such plasticity involves persistent changes of glutamate receptor subtypes and many prior studies have suggested a main role for alpha-amino-3-hydroxy-5-methyl-4-isoxazole propionic acid (AMPA) receptors in mediating the effect. Our previous work in hippocampal slices revealed that, under pharmacological unblocking of NMDA receptors, both AMPA and NMDA receptor mediated responses undergo a slowly developing depression. In the present study we have further addressed this phenomenon, focusing on the contribution via NMDA receptors. Pharmacologically isolated NMDA receptor mediated excitatory postsynaptic potentials (EPSPs) were recorded for two independent synaptic pathways in CA1 area using perfusion with low Mg2+ (0.1 mM) to unblock NMDA receptors. RESULTS: Following unblocking of NMDA receptors, there was a gradual decline of NMDA receptor mediated EPSPs for 2-3 hours towards a stable level of ca. 60-70 % of the maximal size. If such an experimental session was repeated twice in the same pathway with a period of NMDA receptor blockade in between, the depression attained in the first session was still evident in the second one and no further decay occurred. The persistency of the depression was also validated by comparison between pathways. It was found that the responses of a control pathway, unstimulated in the first session of receptor unblocking, behaved as novel responses when tested in association with the depressed pathway under the second session. In similar experiments, but with AP5 present during the first session, there was no subsequent difference between NMDA EPSPs. CONCLUSIONS: Our findings show that merely evoking NMDA receptor mediated responses results in a depression which is input specific, induced via NMDA receptor activation, and is maintained for several hours through periods of receptor blockade. The similarity to key features of long-term depression and long-term potentiation suggests a possible relation to these phenomena. Additionally, a short term potentiation and decay (<5 min) were observed during sudden start of NMDA receptor activation supporting the idea that NMDA receptor mediated responses are highly plastic.
|
|
| 4. |
- Xu, Zhi-Hui, 1963-
(författare)
-
Mechanical Characterisation of Coatings and Composites-Depth-Sensing Indentation and Finite Element Modelling
- 2004
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- In the past two decades depth-sensing indentation has becomea widely used technique to measure the mechanical properties ofmaterials. This technique is particularly suitable for thecharacterisation of materials at sub-micro or nano scale thoughthere is a tendency to extend its application to the micro ormacro scale. The load-penetration depth curve of depth-sensingindentation is a characteristic of a material and can be usedfor analysing various mechanical properties in addition tohardness. This thesis deals with the mechanicalcharacterisation of bulk materials, thin films and coatings,gradient materials, and composites using depth-sensingindentation. Finite element method has been resorted to as atool to understand the indentation behaviour of materials. The piling-up or sinking-in behaviour of materials plays animportant role in the accurate determination of materialsproperties using depth-sensing indentation. Finite elementsimulations show that the piling-up or sinking-in behaviour isdetermined by the material parameters, namelyE/σyratio and strain hardening exponent orexperimental parameterhe/hmaxratio, and the contact friction. Anempirical model has been proposed to relate the contact area ofindentation to theE/σyratio and thehe/hmaxratio and used to predict thepiling-up orsinking-in of materials. The existence of friction is found toenhance the sinking-in tendency of materials. A generalrelationship between the hardness and the indentationrepresentative stress valid for both soft and hard materialshas been obtained. A possible method to estimate the plasticproperties of bulk materials has been suggested. Measuring the coating-only properties requires theindentation to be done within a critical penetration depthbeyond which substrate effect comes in. The ratio of thecritical penetration depth to the coating thickness determinedby nanoindentation is independent of coating thickness andabout 0.2 for gold / nickel, 0.4 for aluminium / BK7 glass, and0.2 for diamond-like-carbon / M2 steel and alumina / nickel.Finite element simulations show that this ratio is dependent onthe combination of the coating and the substrate and moresensitive to differences in the elastic properties than in theplastic properties of the coating/substrate system. Thedeformation behaviour of coatings, such as, piling-up of thesoft coatings and cracking of the hard coatings, has also beeninvestigated using atomic force microscope. The constraint factors, 2.24 for WC phase and 2.7 for WC-Cocemented carbides, are determined through nanoindentation andfinite element simulations. A modified hardness model of WC-Cocemented carbides has been proposed, which gives a betterestimation than the Lee and Gurland hardness model. Finiteelement method has also been used to investigate theindentation behaviour of WC-Co gradient coatings. Keywords:depth-sensing indentation, nanoindentation,finite element method, atomic force microscope, mechanicalproperties, hardness, deformation, dislocations, cracks,piling-up, sinking-in, indentation size effect, thin coatings,composite, gradient materials, WC-Co, diamond-like-carbon,alumina, gold, aluminium, nickel, BK7 glass, M2 steel.
|
|
| 5. |
|
|
| 6. |
- Yu, Miao, et al.
(författare)
-
SERS study of single-walled carbon nanotubes on silver films deposited on different substrates
- 2003
-
Ingår i: Chemical Journal of Chinese Universities / Gao Deng Xue Xiao Hua Xue Xue Bao. - : Chinese Electronic Periodical Services. - 0251-0790. ; 24:6, s. 1285-1288
-
Tidskriftsartikel (refereegranskat)abstract
- Surface-enhanced Raman scattering of single-walled carbon nanotubes (SWNTs) on silver films deposited on various substrates, including sapphire, quartz and glass, has been studied systematically. The characteristic features of G-band and D-band have been analyzed and compared with arc discharged and laser ablation samples. D-band is much more sensitive than G-band. The position and the intensity of the G-band in SERS spectra depend on substrates. The peak shift and absolute intensity of G-band on sapphire is obviously larger than that on glass. The contribution of high frequency vibrations to the D-band is also deendent on substrates. Compared to the SWNTs samples with a high semiconducting tube concentration, the sample with high metallic tube concentration has a stronger interaction with silver films.
|
|
