| 21. |
- Larsson, Anders, 1957, et al.
(författare)
-
High-speed tunable and fixed-wavelength VCSELs for short-reach optical links and interconnects
- 2012
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. - 9780819489197 ; 8276, s. Article Number: 82760H-
-
Konferensbidrag (refereegranskat)abstract
- This paper presents a review of recent work on high speed tunable and fixed wavelength vertical cavity surface emitting lasers (VCSELs) at Chalmers University of Technology. All VCSELs are GaAs-based, employ an oxide aperture for current and/or optical confinement, and emit around 850 nm. With proper active region and cavity designs, and techniques for reducing capacitance and thermal impedance, our fixed wavelength VCSELs have reached a modulation bandwidth of 23 GHz, which has enabled error-free 40 Gbps back-to-back transmission and 35 Gbps transmission over 100 m of multimode fiber. A MEMS-technology for wafer scale integration of tunable high speed VCSELs has also been developed. A tuning range of 24 nm and a modulation bandwidth of 6 GHz have been achieved, enabling error-free back-to-back transmission at 5 Gbps.
|
|
| 22. |
- Larsson, Anders, 1957, et al.
(författare)
-
High speed VCSELs for optical interconnects
- 2012
-
Ingår i: Conference Proceedings - International Conference on Indium Phosphide and Related Materials. - 1092-8669. - 9781467317252 ; , s. 269-272
-
Konferensbidrag (refereegranskat)abstract
- This paper presents an overview of our recent work on high speed, oxide confined, 850 nm vertical cavity surface emitting lasers (VCSELs). With proper active region and cavity designs, and techniques for reducing capacitance and thermal impedance, we have reached a modulation bandwidth of 23 GHz and demonstrated 40 Gbps transmission. Using an integrated mode filter for reducing the spectral width we have extended the reach on multimode fiber at 25 Gbps from 100 to 500 m. Improved link capacity was also demonstrated using a more spectrally efficient multi-level modulation format (4-PAM). Finally, a MEMS-technology for wafer scale integration of tunable high speed VCSELs was developed, enabling a tuning range of 24 nm, a 6 GHz modulation bandwidth, and 5 Gbps transmission.
|
|
| 23. |
|
|
| 24. |
- Adolfsson, Göran, 1981, et al.
(författare)
-
Realization of spectrally engineered semiconductor Fabry-Perot lasers with narrow geometrical tolerances
- 2011
-
Ingår i: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 109:9, s. 093112-
-
Tidskriftsartikel (refereegranskat)abstract
- Spectrally engineered semiconductor Fabry-Perot laser resonators are designed to enhance the optical feedback for selected longitudinal modes, which thereby require less gain for lasing. This is achieved by introducing refractive index perturbations along the length of the resonator. However,the physical realization of these resonators is a challenge because of very narrow tolerances; in particular the need for precise positioning of the end facets of the resonator in relation to the perturbations, and the excess propagation loss associated with the perturbations, has been a majorconcern. We report on a method to achieve high-quality end facet mirrors enabling precise positioning relative to the perturbations, the latter which are realized as lateral corrugations of the waveguide. Measurements show that the mirror quality is comparable to that of cleaved mirrorsand that the additional loss introduced by the perturbations adds
|
|
| 25. |
- Apaydin, Dogukan, 1991, et al.
(författare)
-
Optically Pumped UVC Photonic Crystal Surface-Emitting Laser
- 2023
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Photonic crystal surface-emitting lasers (PCSELs) are a new type of semiconductor lasers that offer a high optical output power while maintaining single-mode operation and a low divergence angle. Such devices rely upon the in-plane optical feedback from a two-dimensional photonic crystal and feature out-of-plane emission of the modes with zero group velocity at the photonic band edges by diffraction. Since the demonstration of the first PCSEL [1], the concept has been implemented in standard semiconductor materials with the demonstration of highperforming infrared and blue-emitting lasers [2, 3]. Extending the laser operation to shorter emission wavelengths would be a major breakthrough as such lasers would be of high interest for disinfection, material processing, curing, and medical treatments.
|
|
| 26. |
- Apaydin, Dogukan, 1991, et al.
(författare)
-
UVC photonic crystal surface-emitting lasers with low-divergent far-fields
- 2023
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Photonic crystal surface-emitting lasers (PCSEL) emitting in the ultraviolet (UV) C spectral range are exciting devices due to their low divergence and single-mode emission capable of high output powers as already demonstrated in the infrared [1] and blue spectral range [2]. This is due to their unique design, which incorporates a photonic crystal leading to a large optical gain area. PCSELs are based upon in-plane feedback from the photonic crystal and out-of-plane emission by the diffraction of the modes with zero group velocity at the photonic band edges. We recently demonstrated, to the best of our knowledge, the first UVC PCSEL with an emission at 279 nm. The device structure consists of 3 x 2 nm AlGaN quantum wells (QW) in a 60 nm Al0.70Ga0.30N waveguide and AlN cladding layers. The 140x140 μm large photonic crystal is dry etched into the top AlN cladding layer with a hexagonal lattice consisting of circular holes with a lattice constant of 140 nm and an etch depth of 65 nm, leaving 65 nm between the bottom of the photonic crystals and the first quantum well. Lasing in these PCSELs was achieved by resonant pumping of the QWs by a 266 nm pulsed laser with a spot size of 82 μm at room temperature. The devices exhibit threshold pump power densities from 25 down to 13 MW/cm2 showing a spectral narrowing down to 25 pm. Far-field patterns and band structures were investigated for a range of filling factors (fraction of the surface that is etched) between 10% to 26%, and the far-fields contain emission bands that were not yet reported in PCSELs at longer wavelengths. Changing the filling factor affects the photonic crystal band structure and thereby the optical mode at the Γ-point that will reach threshold first. This feature enables us to intentionally select the lasing mode with the desired far-field pattern. By a proper choice of filling factor, the intensity in the angular emission bands is diminished, resulting in a far-field with a narrow beam divergence of <1°.
|
|
| 27. |
- Baveja, Prashant, 1985, et al.
(författare)
-
Impact of device parameters on thermal performance of high speed oxide confined 850 nm VCSELs
- 2012
-
Ingår i: IEEE Journal of Quantum Electronics. - 0018-9197 .- 1558-1713. ; 48:1, s. 17-26
-
Tidskriftsartikel (refereegranskat)abstract
- We study the impact of device parameters, such asinner-aperture diameter and cavity photon lifetime, on thermal rollover mechanisms in 850-nm, oxide-confined, vertical-cavity surface-emitting lasers (VCSELs) designed for high-speed operation. We perform measurements on four different VCSELs of different designs and use our empirical thermal model for calculating the power dissipated with increasing bias currents through various physical processes such as absorption within the cavity, carrier thermalization, carrier leakage, spontaneous carrier recombination, and Joule heating. When reducing the topmirror reflectivity to reduce internal optical absorption loss we find an increase of power dissipation due to carrier leakage. There is therefore a trade-ff between the powers dissipated owing to optical absorption and carrier leakage in the sense that overcompensating for optical absorption enhances carrier leakage (and vice versa). We further find that carrier leakage places the ultimate limit on the thermal performance for this entire class ofdevices. Our analysis yields useful design optimization strategies for mitigating the impact of carrier leakage and should thereby prove useful for the performance enhancement of 850-nm, highspeed, oxide-confined VCSELs.
|
|
| 28. |
- Baveja, P. P., et al.
(författare)
-
Assessment of VCSEL thermal rollover mechanisms from measurements and empirical modeling
- 2011
-
Ingår i: Optics Express. - 1094-4087 .- 1094-4087. ; 19:16, s. 15490-15505
-
Tidskriftsartikel (refereegranskat)abstract
- We use an empirical model together with experimental measurements for studying mechanisms contributing to thermal rollover in vertical-cavity surface-emitting lasers (VCSELs). The model is based on extraction of the temperature dependence of threshold current, internal quantum efficiency, internal optical loss, series resistance and thermal impedance from measurements of output power, voltage and lasing wavelength as a function of bias current over an ambient temperature range of 15-100 degrees C. We apply the model to an oxide-confined, 850-nm VCSEL, fabricated with a 9-mu m inner-aperture diameter and optimized for highspeed operation, and show for this specific device that power dissipation due to linear power dissipation (sum total of optical absorption, carrier thermalization, carrier leakage and spontaneous carrier recombination) exceeds power dissipation across the series resistance (quadratic power dissipation) at any ambient temperature and bias current. We further show that the dominant contributors to self-heating for this particular VCSEL are quadratic power dissipation, internal optical loss, and carrier leakage. A rapid reduction of the internal quantum efficiency at high bias currents (resulting in high temperatures) is identified as being the major cause of thermal rollover. Our method is applicable to any VCSEL and is useful for identifying the mechanisms limiting the thermal performance of the device and to formulate design strategies to ameliorate them.
|
|
| 29. |
- Baveja, P. P., et al.
(författare)
-
Impact of photon lifetime on thermal rollover in 850-nm high-speed VCSELs
- 2012
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. - 9780819489197 ; 8276
-
Konferensbidrag (refereegranskat)abstract
- We present an empirical thermal model for VCSELs based on extraction of temperature dependence of macroscopic VCSEL parameters from CW measurements. We apply our model to two, oxide-confined, 850-nm VCSELs, fabricated with a 9-mu m inner-aperture diameter and optimized for high-speed operation. We demonstrate that for both these devices, the power dissipation due to linear heat sources dominates the total self-heating. We further show that reducing photon lifetime down to 2 ps drastically reduces absorption heating and improves device static performance by delaying the onset of thermal rollover. The new thermal model can identify the mechanisms limiting the thermal performance and help in formulating the design strategies to ameliorate them.
|
|
| 30. |
|
|
