| 1. |
- Castro, Jose Manuel, et al.
(författare)
-
48.7 Gb/s 4-PAM Transmission over 200 m of High Bandwidth MMF using an 850 nm VCSEL
- 2015
-
Ingår i: IEEE Photonics Technology Letters. - 1041-1135 .- 1941-0174. ; 27:17, s. 1799-1801
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate 4-PAM 48.67 Gb/s transmission, using a directly modulated VCSEL, over 50, 100 and 200 m of multimode fiber with partial dispersion compensation properties. The results of our experiments indicate that 200 m reach is achievable with forward error correcting codes with small overhead.
|
|
| 2. |
- Castro, Jose Manuel, et al.
(författare)
-
50 Gb/s 4-PAM over 200 m of High Bandwidth MMF using a 850 nm VCSEL
- 2015
-
Ingår i: Optical Fiber Communication Conference 2015, Los Angeles, California, United States, 22–26 March 2015. - 9781557529374
-
Konferensbidrag (refereegranskat)abstract
- Experiments for transmission of 50Gb/s, 4-PAM using direct modulated VCSEL over 100m and 200m of MMF with partial dispersion compensation properties are presented.
|
|
| 3. |
- Castro, J. M., et al.
(författare)
-
Investigation of 60 Gb/s 4-PAM Using an 850 nm VCSEL and Multimode Fiber
- 2016
-
Ingår i: Journal of Lightwave Technology. - : Institute of Electrical and Electronics Engineers (IEEE). - 0733-8724 .- 1558-2213. ; 34:16, s. 3825-3836
-
Tidskriftsartikel (refereegranskat)abstract
- We investigate 4-pulse-amplitude modulation (PAM) at data rates in the range of 50-60 Gb/s using a directly modulated 850 nm VCSEL and multimode fiber links up to 200 m. The channel conditions in which 4-PAM has performance advantages over traditional ON-OFF keying are evaluated followed by experimental results at data rates of 56.7 Gb/s over distances up to 200 m using equalization and FEC, with a post-FEC bit error rate of 10(-12). The reported analysis is applicable to future Ethernet and Fibre Channel applications requiring 50 Gb/s serial data rates per lane over multimode fibers.
|
|
| 4. |
- Gustavsson, Johan, 1974, et al.
(författare)
-
High-speed 850-nm VCSELs for 40 Gb/s transmission
- 2010
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- We have explored the possibility to extend the data transmission rate for standard 850-nm GaAs-based VCSELs beyond the 10 Gbit/s limit of today's commercially available directly-modulated devices. By sophisticated tailoring of the design for high-speed performance we demonstrate that 10 Gb/s is far from the upper limit. For example, the thermal conductivity of the bottom mirror is improved by the use of binary compounds, and the electrical parasitics are kept at a minimum by incorporating a large diameter double layered oxide aperture in the design. We also show that the intrinsic high speed performance is significantly improved by replacing the traditional GaAs QWs with strained InGaAs QWs in the active region. The best overall performance is achieved for a device with a 9 μm diameter oxide aperture, having in a threshold current of 0.6 mA, a maximum output power of 9 mW, a thermal resistance of 1.9 °C/mW, and a differential resistance of 80 Ω. The measured 3dB bandwidth exceeds 20 GHz, and we experimentally demonstrate that the device is capable of error-free transmission (BER
|
|
| 5. |
- Larsson, Anders, 1957, et al.
(författare)
-
1060 nm VCSELs for long-reach optical interconnects
- 2018
-
Ingår i: Optical Fiber Technology. - : Elsevier BV. - 1095-9912 .- 1068-5200. ; 44, s. 36-42
-
Tidskriftsartikel (refereegranskat)abstract
- Reach extension of high capacity optical interconnects based on vertical-cavity surface-emitting lasers (VCSELs) and multimode fibers (MMFs), as needed for large-scale data centers, would benefit from high-speed GaAs-based VCSELs at 1060 nm. At this wavelength, the chromatic dispersion and attenuation of the optical fiber are much reduced in comparison with 850 nm. We present single and multimode 1060 nm VCSELs based on designs derived partly from our high-speed 850 nm VCSEL designs. The single-mode VCSEL, with a modulation bandwidth exceeding 22 GHz, supports back-to-back data rates up to 50 Gbps at 25 °C and 40 Gbps at 85 °C under binary NRZ (OOK) modulation. Using mode-selective launch, we demonstrate error-free 25 Gbps transmission over 1000 m of 1060 nm optimized MMF. Higher data rates and/or longer distances will be possible with equalization, forward-error-correction, and/or multilevel modulation.
|
|
| 6. |
- Larsson, Anders, 1957, et al.
(författare)
-
High speed VCSELs for optical interconnects
- 2012
-
Ingår i: Conference Proceedings - International Conference on Indium Phosphide and Related Materials. - 1092-8669. - 9781467317252 ; , s. 269-272
-
Konferensbidrag (refereegranskat)abstract
- This paper presents an overview of our recent work on high speed, oxide confined, 850 nm vertical cavity surface emitting lasers (VCSELs). With proper active region and cavity designs, and techniques for reducing capacitance and thermal impedance, we have reached a modulation bandwidth of 23 GHz and demonstrated 40 Gbps transmission. Using an integrated mode filter for reducing the spectral width we have extended the reach on multimode fiber at 25 Gbps from 100 to 500 m. Improved link capacity was also demonstrated using a more spectrally efficient multi-level modulation format (4-PAM). Finally, a MEMS-technology for wafer scale integration of tunable high speed VCSELs was developed, enabling a tuning range of 24 nm, a 6 GHz modulation bandwidth, and 5 Gbps transmission.
|
|
| 7. |
- Lengyel, Tamas, 1986, et al.
(författare)
-
Impact of Damping on 50 Gbps 4-PAM Modulation of 25G Class VCSELs
- 2017
-
Ingår i: Optics InfoBase Conference Papers. - 2162-2701. - 9781943580231 ; , s. paper W3G.2-
-
Konferensbidrag (refereegranskat)abstract
- We investigate the effects of photon lifetime and damping of the modulation response on the quality of 50 Gbps 4-PAM signal generation with directly modulated 25G class VCSELs and identify the appropriate values for the K-factor.
|
|
| 8. |
- Lengyel, Tamas, 1986, et al.
(författare)
-
Pre-emphasis enabled 50 Gbit/s transmission over 1000 m SMF using a 1060 nm single-mode VCSEL
- 2018
-
Ingår i: Electronics Letters. - : Institution of Engineering and Technology (IET). - 1350-911X .- 0013-5194. ; 54:20, s. 1186-1187
-
Tidskriftsartikel (refereegranskat)abstract
- A single-mode 1060 nm vertical-cavity surface-emitting laser (VCSEL) and single-mode fibre (SMF) based link with two-tap active pre-emphasis enabling error-free transmission of 50 Gbit/s NRZ-OOK over 1000 m is presented.
|
|
| 9. |
|
|
| 10. |
- Safaisini, Rashid, 1981, et al.
(författare)
-
22 Gb/s error-free data transmission beyond 1 km of multi-mode fiber using 850 nm VCSELs
- 2013
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. - 9780819494085 ; 8639
-
Konferensbidrag (refereegranskat)abstract
- The first error-free data transmission beyond 1 km of multi-mode fiber at bit-rates exceeding 20 Gb/s is demonstrated using a high modulation bandwidth, quasi-single mode (SMSR similar to 20 dB) 850 nm VCSEL. A VCSEL with small similar to 3 mu m aperture shows quasi-single mode operation with a narrow spectral width. The top mirror reflectivity of the VCSEL is optimized for high speed and high output power by shallow etching. A combination of narrow spectral width and high optical power reduces the effects of fiber dispersion and fiber and connector losses and enables such a long transmission distance at high bit-rates.
|
|
