| 1. |
- Landqvist, Hans, 1958, et al.
(författare)
-
Intresse och engagemang: Kungliga Tekniska högskolans insatser i ett svenskt terminologiskt nätverk 1941–1983 : Interest and involvement: the contributions of the Royal Institute of Technology to a Swedish terminological network 1941–1983
- 2021
-
Ingår i: Folkmålsstudier Meddelanden från Föreningen för nordisk filologi. - 0356-1771. ; 59, s. 103-133
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we study how KTH Royal Institute of Technology (Kungliga Tekniska högskolan – KTH) has participated in and influenced terminology work coordinated by the national terminology centre, the Swedish Centre for Technical Terminology – the TNC, in Sweden during the period 1941–1983. The aim of this paper is to shed light on the development of Swedish (technical) terminology based on networking and experts’ efforts. Based on archive material, we analyze who have been the active KTH experts, in what ways they were involved in the development processes and what effects their efforts had on the term recommendations given by the TNC. The archive material consists of written documents relating to the work process developed by John Wennerberg, who led the TNC between 1941 and 1957. The process was carried out in the form of 373 formal survey letters representing 17 subject fields, with both the TNC and external parties participating. Our results show that the 31 identified KTH experts play a visible role in the processes by 480 received survey letters within 14 subject fields. The response rate, 80 percent, reveal the experts’ involvement in the process and their high esteem of TNC’s work. The analysis of the comprehensive survey letter R198 shows that Wennerberg has considered the experts’ answers regarding terms (selection, linguistic form, acceptance/discourage) and definitions when he has published TNC’s recommendations. Our study shows that networking and experts representing the educational sector and furthermore universities have been an inseparable part of the development of Swedish (technical) terminology during several decades when the national terminology centre in Sweden began to operate and the working methods were established.
|
|
| 2. |
- Nissilä, Niina, et al.
(författare)
-
”Av intresse för saken dristar jag mig att till diskussion framlägga ett par spörsmål” – Kaksi suomalaista akateemista uranuurtajaa terminologiaverkoston kirjeenvaihdossa
- 2021
-
Ingår i: Workplace Communication IV (VAKKI Publications 13.) Eds H. Katajamäki, M. Enell-Nilsson, H. Kauppinen-Räisänen, L. Kääntä & H. Salovaara. - 2242-6841 .- 2242-685X. ; 13
-
Tidskriftsartikel (refereegranskat)abstract
- The Swedish Tekniska Nomenklaturcentralen TNC (2000–2018 Terminologicentrum TNC) has been Sweden's national center for special languages and terminology work for more than 75 years. Since its founding in 1941, the TNC has been active not only in Sweden, but also in establishing and maintaining international contacts. The article describes the contacts between actors in the Swedish and Finnish terminology field, looking in particular at the contacts between the TNC and actors in the Finnish higher education sector between the 1940s and the 1990s. The method utilized is close reading and content analysis. The research material used is the collection of foreign correspondence in the TNC's document archive, and in particular the section stored in connection with the code Ufin, i.e. sections concerning communication between the TNC and Finnish actors. The article describes the topics covered in the communication, the objectives and consequences of the communication and the results achieved. The article focuses especially on the contacts between the TNC and two active actors in Finland, professor Jarl Salin at the Åbo Akademi University and professor Christer Laurén at the University of Vaasa. In the analysis, the Ufin themes of the letters were categorized in four main categories: publications, communication, information and language issues. In professor Jarl Salins letters, the most common theme were language issues, whereas Professor Christer Laurén contacted TNC especially in connection with publications and publishing.
|
|
| 3. |
- Pilke, Nina, et al.
(författare)
-
Organising Terminology Work in Sweden from the 1940s onwards – Participatory Expert Roles in Networks
- 2021
-
Ingår i: Terminology as a Societal Resource. Possibilities and Responsibilities in a Changing World. Special Issue of Terminology International Journal of Theoretical and Applied Issues in Specialized Communication. - : John Benjamins Publishing Company. - 0929-9971 .- 1569-9994. ; 27:1, s. 80-109
-
Tidskriftsartikel (refereegranskat)abstract
- The present study deals with organised terminology work in Sweden from the 1940s to the late 2010s. Using archive material, we describe how practical terminology work was carried out in Sweden during the period 1941–2018/ 2019, when the Swedish Centre for Technical Terminology/the Swedish Centre for Terminology (TNC) was the central actor. Thereafter, we discuss models for building a new infrastructure for terminology work after the clo- sure of the TNC in 2018/2019. This discussion is based on interviews and analyses of articles and current reports. The study shows that multifaceted contacts with experts, academia, industry and society have played an essen- tial role for terminology work in Sweden since the 1930s. In the current situ- ation (2019), the activities are being reorganised and responsibility for terminology work is distributed between several actors. A new main actor is the government agency known as the Institute of Language and Folklore (Isof ). Finally, we discuss future visions for terminology work in Sweden.
|
|
| 4. |
- Sepehri, Sobhan, 1986, et al.
(författare)
-
Volume-amplified magnetic bioassay integrated with microfluidic sample handling and high-Tc SQUID magnetic readout
- 2018
-
Ingår i: APL Bioengineering. - : AIP Publishing. - 2473-2877. ; 2:1
-
Tidskriftsartikel (refereegranskat)abstract
- A bioassay based on a high-Tc superconducting quantum interference device (SQUID) reading out functionalized magnetic nanoparticles (fMNPs) in a prototype microfluidic platform is presented. The target molecule recognition is based on volume amplification using padlock-probe-ligation followed by rolling circle amplification (RCA). The MNPs are functionalized with single-stranded oligonucleotides, which give a specific binding of the MNPs to the large RCA coil product, resulting in a large change in the amplitude of the imaginary part of the ac magnetic susceptibility. The RCA products from amplification of synthetic Vibrio cholera target DNA were investigated using our SQUID ac susceptibility system in microfluidic channel with an equivalent sample volume of 3 μl. From extrapolation of the linear dependence of the SQUID signal versus concentration of the RCA coils, it is found that the projected limit of detection for our system is about 1.0 e5 RCA coils (0.2e−18 mol), which is equivalent to 66 fM in the 3 μl sample volume. This ultra-high magnetic sensitivity and integration with microfluidic sample handling are critical steps towards magnetic bioassays for rapid detection of DNA and RNA targets at the point of care.
|
|
| 5. |
- Andersson, Viktor, 1983, et al.
(författare)
-
Alkali interactions with a calcium manganite oxygen carrier used in chemical looping combustion
- 2022
-
Ingår i: Fuel Processing Technology. - : Elsevier BV. - 0378-3820 .- 1873-7188. ; 227
-
Tidskriftsartikel (refereegranskat)abstract
- Chemical-Looping Combustion (CLC) of biofuels is a promising technology for cost-efficient CO2 separation and can lead to negative CO2 emissions when combined with carbon capture and storage. A potential challenge in developing CLC technology is the effects of alkali metal-containing compounds released during fuel conversion. This study investigates the interactions between alkali and an oxygen carrier (OC), CaMn0.775Ti0.125Mg0.1O3-δ, to better understand the fate of alkali in CLC. A laboratory-scale fluidized bed reactor is operated at 800–900 °C in oxidizing, reducing and inert atmospheres to mimic CLC conditions. Alkali is fed to the reactor as aerosol KCl particles, and alkali in the exhaust is measured online with a surface ionization detector. The alkali concentration changes with gas environment, temperature, and alkali loading, and the concentration profile has excellent reproducibility over repeated redox cycles. Alkali-OC interactions are dominated by alkali uptake under most conditions, except for a release during OC reduction. Uptake is significant during stable reducing conditions, and is limited under oxidizing conditions. The total uptake during a redox cycle is favored by a high alkali loading, while the influence of temperature is weak. The implications for the understanding of alkali behavior in CLC and further development are discussed.
|
|
| 6. |
- Bengtsson, Stefan, 1961, et al.
(författare)
-
Carbon-based nanoelectromechanical devices
- 2011
-
Ingår i: International Journal of High Speed Electronics and Systems. - 1793-6438. ; 20:1, s. 195-204
-
Tidskriftsartikel (refereegranskat)abstract
- Carbon-based nanoelectromechanical devices are approaching applications in electronics. Switches based on individual carbon nanotubes deliver record low off-state leakage currents. Arrays of vertically aligned carbon nanotubes or nanofibers can be fabricated to constitute varactors. Very porous, low density arrays of quasi-vertically aligned arrays of carbon nanotubes behave mechanically as a single unit with very unusual material properties.
|
|
| 7. |
- Stanicic, Ivana, 1994, et al.
(författare)
-
Combined manganese oxides as oxygen carriers for biomass combustion — Ash interactions
- 2019
-
Ingår i: Chemical Engineering Research and Design. - : Elsevier BV. - 0263-8762 .- 1744-3563. ; 149, s. 104-120
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019 Institution of Chemical Engineers Carbon capture and storage (CCS) has been acknowledged as an important strategy for mitigation of climate change. Although highly applicable for fossil fuels, CCS with biomass could have the added advantage of resulting in negative emissions of carbon dioxide. One promising carbon capture technology is chemical-looping combustion (CLC). In CLC the reactors are filled with metal oxide bed material called oxygen carriers. Before CLC can be implemented for biomass combustion at a large scale, biomass ash components interaction with oxygen carriers needs to be further understood. Four combined manganese oxides Mn3O4-SiO2, Mn3O4-SiO2-TiO2, Mn3O4-Fe2O3 and Mn3O4-Fe2O3-Al2O3 were exposed to common biomass ash components K, Ca and P. The ash components can exist in many forms, but here the compounds CaCO3, K2CO3 and CaHPO4 were used. Exposures were performed at 900 °C for six hours in oxidising, reducing and inert conditions. Crystalline phases were analysed by XRD and morphology examined with SEM-EDX. Results show that oxygen carrier particles containing silicon were more likely to form agglomerates, especially in combination with potassium, whereas the particles including iron were more stable. MnFeAl was the oxygen carrier that showed least agglomerating behaviour while simultaneously showing a propensity to absorb some ash components. Some inconsistencies between thermodynamic predictions and experimental results is observed. This may be explained by lack of relevant data in the used databases, were only a few of the oxygen carrier-ash systems and subsystems have been optimised. Further optimisation related to manganese rich systems should be performed to obtain reliable results.
|
|
| 8. |
- Chen, Tingsu, et al.
(författare)
-
Spin-Torque and Spin-Hall Nano-Oscillators
- 2016
-
Ingår i: Proceedings of the IEEE. - : Institute of Electrical and Electronics Engineers (IEEE). - 0018-9219 .- 1558-2256. ; 104:10, s. 1919-1945
-
Tidskriftsartikel (refereegranskat)abstract
- This paper reviews the state of the art in spin-torque and spin-Hall-effect-driven nano-oscillators. After a brief introduction to the underlying physics, the authors discuss different implementations of these oscillators, their functional properties in terms of frequency range, output power, phase noise, and modulation rates, and their inherent propensity for mutual synchronization. Finally, the potential for these oscillators in a wide range of applications, from microwave signal sources and detectors to neuromorphic computation elements, is discussed together with the specific electronic circuitry that has so far been designed to harness this potential.
|
|
| 9. |
- Juul, L., et al.
(författare)
-
Ulva fenestrata protein - Comparison of three extraction methods with respect to protein yield and protein quality
- 2021
-
Ingår i: Algal Research-Biomass Biofuels and Bioproducts. - : Elsevier BV. - 2211-9264. ; 60
-
Tidskriftsartikel (refereegranskat)abstract
- Seaweed is gaining attention as a possible alternative and sustainable source of proteins. This study investigates three protein extraction methods and their effect on protein yield and quality when applied to Ulva fenestrata. Two of the methods included alkaline extractions (pH-shifts); one version solubilizing the proteins at pH 8.5 and one solubilizing them at pH 8.5 followed by pH 12 (pH 8.5 + 12). The third method was a mechanical pressing, using a double screw press. All extraction methods were followed by isoelectric precipitation to concentrate the proteins. Extraction at pH 8.5 gave the significantly highest total protein yield after the isoelectric precipitation, followed by extraction at pH 8.5 + 12 and lastly mechanical extraction gave the lowest yield. Proteins extracted with both alkaline methods had a significantly higher solubility at pH 7 and pH 9, compared to proteins from the mechanical pressing. There were no significant differences between the three methods in total D/L-amino acid ratio. Amino acid cross-links measured as lysinoalanine (LAL) and lanthionine (LAN) where found in significantly higher amounts in alkali-extracted proteins compared to mechanically extracted, however not to a degree that expect to compromise functional or nutritional quality. Further, no significant difference in protein in vitro digestibility was found between extraction methods. In conclusion, results indicated that protein extraction at pH 8.5 can be recommended, especially regarding total protein yield and solubility of the final protein extract.
|
|
| 10. |
- Larsson, Carl Fredrik, 1980, et al.
(författare)
-
Overcurrent Abuse of Primary Prismatic Zinc–Air Battery Cells Studying Air Supply Effects on Performance and Safety Shut-Down
- 2017
-
Ingår i: Batteries. - : MDPI AG. - 2313-0105. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Overcurrent abuse has been performed on commercial 48 Ah primary prismatic zinc (Zn)–Air battery cells with full air supply as well as with shut-off air supply. Compared to other battery technologies, e.g., lithium-ion batteries, metal–air batteries offer the possibility to physically stop the battery operation by stopping its air supply, thus offering an additional protection against severe battery damage in the case of, e.g., an accidental short circuit. This method may also reduce the electrical hazard in a larger battery system since, by stopping the air supply, the voltage can be brought to zero while maintaining the energy capacity of the battery. Measurements of overdischarge currents and current cut-off by suffocation have been performed to assess the safety of this type of Zn–air battery. The time to get to zero battery voltage is shown to mainly be determined by the volume of air trapped in the cell.
|
|
