| 1. |
- Chen, Miaoxiang, 1962-, et al.
(författare)
-
High carrier mobility in low band gap polymer-based field-effect transistors
- 2005
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 87:25, s. 252105-1-252105-3
-
Tidskriftsartikel (refereegranskat)abstract
- A conjugated polymer with a low band gap of 1.21 eV, i.e., absorbing infrared light, is demonstrated as active material in field-effect transistors (FETs). The material consists of alternating fluorene units and low band gap segments with electron donor-acceptor-donor units composed of two electron-donating thiophene rings attached on both sides of a thiadiazolo-quinoxaline electron-acceptor group. The polymer is solution-processable and air-stable; the resulting FETs exhibit typical p-channel characteristics and field-effect mobility of 0.03 cm2 V−1 s−1.
|
|
| 2. |
- Lindgren, Lars Johan, 1977, et al.
(författare)
-
Synthesis, Characterization, and Devices of a Series of Alternating Copolymers for Solar Cells
- 2009
-
Ingår i: CHEMISTRY OF MATERIALS. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 21:15, s. 3491-3502
-
Tidskriftsartikel (refereegranskat)abstract
- In this study we report the synthesis, characterization. and photovoltaic properties of a series of six Conjugated polymers based on donor-acceptor-donor (DAD) structure. The polymers are obtained via Suzuki polymerization of different alkoxy-substituted DAD monomers together with a substituted fluorene or phenylene monomer. Application of polymers as light-harvesting and electron-donating materials in solar cells, in conjunction with both [60]PCBM and [70]PCBM as acceptors, show power-conversion efficiencies (PCEs) up to 2.9%, values obtained without extensive optimization work. Furthermore, atomic force microscopy and field-effect transistor (FET) mobility measurements of acceptor-polymer mixtures show that differences in substitution on the polymers affect morphology, mobility, and device performance. Within the series of polymers, all showing similar optical absorption and redox behavior, substituents play an important role in phase separation on a micrometer scale, which in turn has a large impact on device performance. The phase-separation behavior is clearly seen in [70]PCBM devices where the best-performing devices are obtained using the polymers with short alkoxy groups or no substituents together with a high speed of spin coating during device preparation.
|
|
| 3. |
|
|
| 4. |
- Wang, Xiangjun, et al.
(författare)
-
Polymer solar cells with low-bandgap polymers blended with C70-derivative give photocurrent at 1 μm
- 2006
-
Ingår i: Thin Solid Films. - : Elsevier BV. - 0040-6090. ; 511-512, s. 576-580
-
Tidskriftsartikel (refereegranskat)abstract
- A new series of low-bandgap alternating polyfluorenes with different donor–acceptor–donor moieties have been synthesized. Electrochemical and optical absorption measurement show that onset bandgaps of these polymers range from 1.2 to 1.5 eV. These polymers, blended with a C70-derivative as acceptor, are used for solar cell fabrication. Devices show promising photovoltaic properties, and the spectral response of photocurrent covers all visible and near-infrared wavelength regions with its onset extended to 1 μm. The best data gives a photocurrent density of 3.4 mA/cm2, open circuit voltage of 0.58 V and power conversion efficiency of 0.7% under illumination of AM1.5 (1000 W/m2) from a solar simulator.
|
|
| 5. |
- Zhang, Fengling, et al.
(författare)
-
High photovoltage achieved in low band gap polymer solar cells by adjusting energy levels of a polymer with the LUMOs of fullerene derivatives
- 2008
-
Ingår i: Journal of Materials Chemistry. - : Royal Society of Chemistry (RSC). - 0959-9428 .- 1364-5501. ; 18:45, s. 5468-5474
-
Tidskriftsartikel (refereegranskat)abstract
- Solar cells based on organic molecules or conjugated polymers attract great attention due to their unique advantages, such as low cost, and their use in flexible devices, but are still limited by their low power conversion efficiency (PCE). To improve the PCEs of polymer solar cells, more efforts have been made to increase short-circuit current (J(sc)) or open-circuit voltage (V-oc). However, the trade-off between J(sc) and V-oc in bulk heterojunctions solar cells makes it tricky to find a polymer with a low band gap to efficiently absorb photons in the visible and near infrared region of the solar spectrum, while maintaining a high V-oc in solar cells. Therefore, it is crucial to design and synthesize polymers with energy levels aligning with the LUMO (lowest unoccupied molecular orbital) of an electron acceptor to minimize the LUMO level difference between donor and acceptor to keep enough driving force for charge generation, thereby maximizing photovoltage in solar cells. Here a novel copolymer APFO-Green 9 was synthesized. Polymer solar cells based on APFO-Green 9 blended with a derivative of fullerene demonstrate high photovoltage by fine tuning the HOMO and LUMO level of APFO-Green 9. Solar cells based on APFO-Green 9 and [6,6]-phenyl-C71-butyric acid methyl ester ([70]PCBM) present a photoresponse extended to 900 nm with J(sc) of 6.5 mA cm(-2), V-oc of 0.81 V and PCE of 2.3% under illumination of AM1.5 with light intensity of 100 mW cm(-2). As a low band gap polymer with a V-oc bigger than 0.8 V, APFO-Green 9 is a promising candidate for efficient tandem solar cells.
|
|
| 6. |
- Zhang, Fengling, 1960-, et al.
(författare)
-
Polymer solar cells based on a low-bandgap fluorene copolymer and a fullerene derivative with photocurrent extended to 850 nm
- 2005
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-3028 .- 1616-301X. ; 15:5, s. 745-750
-
Tidskriftsartikel (refereegranskat)abstract
- Polymer solar cells were fabricated from a low band-gap alternating polyfluorene copolymer, APFO-Green2, combined with [6,6]-phenyl-C61-butyric acid Me ester (PCBM), from org. solns. External quantum efficiencies of the solar cells show an onset at 850 nm and a peak of >10% located at 650 nm, which corresponds to the extended absorption spectrum of the polymer. A photocurrent of 3.0 mA/cm2, photovoltage of 0.78 V, and power conversion efficiency of 0.9% were obtained with solar cells based on this new low-bandgap polymer under an illumination of AM 1.5 (1000 W/m2) from a solar simulator. [on SciFinder (R)]
|
|
