| 41. |
- Björström, Cecilia M., et al.
(författare)
-
Influence of solvents and substrates on the morphology and the performance of low-bandgap polyfluorene:PCBM photovoltaic devices
- 2006
-
Ingår i: Proceedings of SPIE, the International Society for Optical Engineering. - Cardiff : SPIE - International Society for Optical Engineering. - 0277-786X .- 1996-756X. ; 6192, s. 61921X-
-
Tidskriftsartikel (refereegranskat)abstract
- Spin-coated thin films of poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (APFO-3) blended with [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) are used as the active material in polymer photovoltaic cells. Such blends are known for their tendency to phase separate during film formation. Tuning the morphology of the blend in a controlled way is one possible road towards higher efficiency. We studied the effect of adding chlorobenzene to chloroform-based blend solutions before spin-coating on the conversion efficiency of APFO-3:PCBM photodiodes, and related that to the lateral and vertical morphology of thin films of the blend. The lateral morphology is imaged by atomic force microscopy (AFM) and the vertical compositional profile is obtained by dynamic secondary ion mass spectrometry (SIMS). The profiles reveal compositional variations consisting of multilayers of alternating polymer-rich and PCBM-rich domains in the blend film spin-coated from chloroform. The vertical compositional variations are caused by surface-directed spinodal waves and are frozen in during the rapid evaporation of a highly volatile solvent. With addition of the low-vapour pressure solvent chlorobenzene, a more homogeneous vertical composition is found. The conversion efficiency for solar cells of this blend was found to be optimal for chloroform:chlorobenzene mixtures with a volume-ratio of 80:1. We have also investigated the role of the substrate on the morphology. We found that blend films spin-coated from chloroform solutions on PEDOT:PSS-coated ITO show a similar compositional structure as the films on silicon, and that changing the substrate from silicon to gold only affects the vertical phase separation in a region close to the substrate interface
|
|
| 42. |
- Cai, Tianqi, et al.
(författare)
-
Low bandgap polymers synthesized by FeCl(3) oxidative polymerization
- 2010
-
Ingår i: Solar Energy Materials and Solar Cells. - : Elsevier BV. - 0927-0248. ; 94:7, s. 1275-1281
-
Tidskriftsartikel (refereegranskat)abstract
- Four low bandgap polymers, combining an alkyl thiophene donor with benzo[c][1,2,5]thiadiazole, 2,3-diphenylquinoxaline, 2,3-diphenylthieno[3,4-b]pyrazine and 6,7-diphenyl-[1,2,5]thiadiazolo[3,4-g] quinoxaline acceptors in a donor-acceptor-donor architecture, were synthesized via FeCl3 oxidative polymerization. The molecular weights of the polymers were improved by introducing o-dichlor-obenzene (ODCB) as the reaction solvent instead of the commonly used solvent, chloroform. The photophysical, electrochemical and photovoltaic properties of the resulting polymers were investigated and compared. The optical bandgaps of the polymers vary between 1.0 and 1.9 eV, which is promising for solar cells. The devices spin-coated from an ODCB solution of P1DB:[70]PCBM showed a power conversion efficiency of 1.08% with an open-circuit voltage of 0.91 V and a short-circuit current density of 3.36 mA cm(-2) under irradiation from an AM1.5G solar simulator (100 mW cm(-2)). (C) 2010 Elsevier B.V. All rights reserved.
|
|
| 43. |
- De, Swati, et al.
(författare)
-
Exciton Dynamics in Alternating Polyfluorene/Fullerene Blends
- 2008
-
Ingår i: Journal of Chemical Physics. - College Park, MD, United States : American Institute of Physics (AIP). - 0021-9606 .- 1089-7690. ; 350:1-3, s. 14-22
-
Tidskriftsartikel (refereegranskat)abstract
- Exciton dynamics in alternating copolymer/fullerene solar cell blends have been investigated using femtosecond transient absorption spectroscopy. The acceptor concentrations have been varied over a wide range. Experimental data, kinetic modeling and simulations, all indicate that the efficiency of exciton conversion to charges is 100% even at acceptor concentrations as low as 20 wt%. The reported dependence of solar cell efficiency on fullerene concentration may thus arise from other factors. However, there exists an acceptor concentration threshold (5 wt%) below which a substantial fraction of the excitations remain unquenched. The results, we believe are very relevant to optimization of performance efficiency by clever manipulation of morphology. We have also observed exciton–exciton energy transfer in these blends at low acceptor concentrations.
|
|
| 44. |
- De, Swati, et al.
(författare)
-
Geminate charge recombination in alternating polyfluorene copolymer/fullerene blends
- 2007
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 129:27, s. 8466-8472
-
Tidskriftsartikel (refereegranskat)abstract
- By measuring excited state and charge dynamics in blends of an alternating polyfluorene copolymer and fullerene derivative over nine orders in time and two orders in light intensity, we have monitored the light-induced processes from ultrafast charge photogeneration to much slower decay of charges by recombination. We find that at low light intensities relevant to solar cell operation relatively fast (∼30 ns) geminate recombination is the dominating charge decay process, while nongeminate recombination has a negligible contribution. The conclusion of our work is that under solar illumination conditions geminate recombination of charges may be directly competing with efficient charge collection in polymer/fullerene solar cells. © 2007 American Chemical Society.
|
|
| 45. |
- Du, Chun, et al.
(författare)
-
9-Alkylidene-9H-Fluorene-Containing Polymer for High-Efficiency Polymer Solar Cells
- 2011
-
Ingår i: Macromolecules. - : American Chemical Society. - 0024-9297 .- 1520-5835. ; 44:19, s. 7617-7624
-
Tidskriftsartikel (refereegranskat)abstract
- A novel donor-acceptor copolymer containing 9-alkylidene-9H-fluorene unit in the main chain, poly[9-(1-hexylheptylidene)-2,7-fluorene-alt-5, 5-(4,7-di-2-thienyl-5,6-dialkoxy-2,1,3-benzothiadiazole)] (PAFDTBT), has been synthesized and evaluated in bulk heterojunction polymer solar cells (BHJ PSCs). The polymer possesses a low band gap of 1.84 eV, a low-lying HOMO energy level (5.32 eV), and excellent solubility in common organic solvents. PSCs based on PAFDTBT and (6,6)-phenyl-C(71)-butyric add methyl ester (PC(71)BM) demonstrate a power conversion efficiency (PCE) of 6.2% with a high fill factor (FF) of 0.70, which indicates that 9-alkylidene-9H-fluorene can be a very useful building block for constructing narrow band gap conjugated polymers for high-efficiency BHJ PSCs.
|
|
| 46. |
- Du, Siying, et al.
(författare)
-
Nonfullerene acceptors from thieno[3,2-b]thiophene-fused naphthalene donor core with six-member-ring connection for efficient organic solar cells
- 2021
-
Ingår i: Dyes and Pigments. - : Elsevier BV. - 0143-7208 .- 1873-3743. ; 185
-
Tidskriftsartikel (refereegranskat)abstract
- Comprehensive design ideas on the fused-ring donor-core in state-of-the-art acceptor-donor-acceptor (A-D-A) nonfullerene acceptors (NFAs) are still of great importance for regulating the electron push-pull effect for the sake of optimal light-harvesting, frontier molecular orbital levels, and finally their photovoltaic properties. Herein, thieno[3,2-b]thiophenes were fused in bay-area of naphthalene via six-member-ring connection, resulting in the formation of dihydropyrenobisthieno[3,2-b]thiophene based octacyclic ladder-type donor core, which was flanked by two 1,1-dicyanomethylene-3-indanone (IC) acceptor motifs with and without 5,6-diflourination, namely PTT-IC and PTT-2FIC, respectively, as novel efficient A-D-A fused-ring electron acceptors (FREAs). Compared with PTT-IC, fluorinated PTT-2FIC possesses narrower optical bandgap of 1.48 eV, better π-π stacking, and its PBDB-T:PTT-2FIC blend film exhibited better morphology, and better hole and electron mobility. As a result, nonfullerene solar cells using PBDB-T:PTT-2FIC as the active layer achieved a decent PCE of 10.40%, with an open-circuit voltage (VOC) of 0.87 V, a fill factor (FF) of 0.65, and a much higher short-circuit current (JSC) of 18.26 mA/cm2. Meanwhile, the PBDB-T:PTT-IC cells delivered a lower JSC of 12.58 mA/cm2 but a higher VOC of 0.99 V, thus resulting in a PCE of 7.39% due to its wider optical bandgap of 1.58 eV and higher LUMO energy level. These results demonstrated that NFAs based on fused-ring donor core from fusing thieno[3,2-b]thiophenes with naphthalene via six-member-ring connection are promising for organic photovoltaic applications.
|
|
| 47. |
- Dyer, Aubrey L., et al.
(författare)
-
A Vertically Integrated Solar-Powered Electrochromic Window for Energy Efficient Buildings
- 2014
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlag. - 0935-9648 .- 1521-4095. ; 26:28, s. 4895-4900
-
Tidskriftsartikel (refereegranskat)abstract
- A solution-processed self-powered polymer electrochromic/photovoltaic (EC/PV) device is realized by vertically integrating two transparent PV cells with an ECD. The EC/PV cell is a net energy positive dual functional device, which can be reversibly switched between transparent and colored states by PV cells for regulating incoming sunlight through windows. The two PV cells can individually, or in pairs, generate electricity.
|
|
| 48. |
|
|
| 49. |
- Gadisa, Abay, et al.
(författare)
-
A new donor-acceptor-donor polyfluorene copolymer with balanced electron and hole mobility
- 2007
-
Ingår i: Adv. Funct. Mater. FIELD Full Journal Title:Advanced Functional Materials. ; 17:18, s. 3836-3842
-
Tidskriftsartikel (refereegranskat)abstract
- A new alternating polyfluorene copolymer poly[2,7-(9,9-dioctylfluoren)-alt-5,5-(5',8'-di-2-thienyl-(2',3'-bis-(3''-octyloxyphenyl)-quinoxaline))] (APFO-15), which has electron donor-acceptor-donor units in between the fluorene units, is synthesized and characterized. This polymer has a strong absorption and emission in the visible range of the solar spectrum. Its electroluminescence and photolumin escence emissions extend from about 560 to 900 nm. Moreover, solar cells with efficiencies in excess of 3.5 % have been realized from blends of APFO-15 and an electron acceptor mol., a mathanofullerene [6,6]-phenyl-C61-butyric acid Me ester (PCBM). It has also been obsd. that electron and hole transport is balanced both in the pure polymer phase and in polymer/PCBM bulk heterojunction films, which makes this material quite attractive for applications in opto-electronic devices. [on SciFinder (R)]
|
|
| 50. |
- Gadisa, Abay, et al.
(författare)
-
Bipolar Charge Transport in Fullerene Molecules in a Bilayer and Blend of Polyfluorene Copolymer and Fullerene
- 2010
-
Ingår i: ADVANCED MATERIALS. - : Wiley. - 0935-9648. ; 22:9, s. 1008-
-
Tidskriftsartikel (refereegranskat)abstract
- Efficient polymer solar cells typically contain the fullerene derivative [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), which promotes dissociation of excited states and enhances charge transport. The ability of PCBM to transport holes in solar cell bulk heterojunction films is monitored via the electroluminescence emission of a bulk heterojunction blend of PCBM and a polyfluorene copolymer. In polymer/fullerene bilayer diodes, fullerene emission is also observed.
|
|
