| 21. |
- Björk, Per, et al.
(författare)
-
Dynamics of complex formation between biological and luminescent conjugated polyelectrolytes - a surface plasmon resonance study
- 2005
-
Ingår i: Biosensors and Bioelectronics. - : Elsevier BV. - 0956-5663. ; 20:9, s. 1764-1771
-
Tidskriftsartikel (refereegranskat)abstract
- A water-soluble polythiophene, POWT, with zwitterionic peptide like side chains possess good characteristics for biosensor applications. The zwitterionic side chains of the polymer can couple to biomolecules via electrostatic and hydrogen bonding. This creates possibilities to imprint biomolecules to spin-coated polymer films with maintained functionality, and use the resulting matrix as a biosensor. Polymer-biomolecular interaction studies done with surface plasmon resonance (SPR) reveal a well performing sensor matrix with high affinity for DNA hybridizations as well as for protein detection. The responses are distinct and very specific. A directional dependence of antibodies binding to POWT layer has also been observed. The polymer films have also been characterized by optical methods. Emission and absorption measurements in different buffer systems confirm that the polymer matrix can undergo structural and conformational changes on surfaces. The dielectric function in the interval 300–800 nm of POWT is reported, based on variable angle spectroscopic ellipsometry. This modeling reveals that a considerable amount of water is included in the material. The polymer layer possesses the characteristics needed for biochip applications and micro array techniques.
|
|
| 22. |
- Björk, Per, et al.
(författare)
-
Oligothiophene Assemblies Defined by DNA Interaction : From Single Chains to Disordered Clusters
- 2009
-
Ingår i: SMALL. - : Wiley. - 1613-6810 .- 1613-6829. ; 5:1, s. 96-103
-
Tidskriftsartikel (refereegranskat)abstract
- The organization of conjugated polyelectrolytes (CPEs) interacting with biomolecules sets conditions for the biodetection of biological processes and identity, through the use of optical emission from the CPE. Herein, a well-defined CPE and its binding to DNA is studied. By using dynamic light scattering and circular dichroism spectroscopy, it is shown that the CPE forms a multimolecule ensemble in aqueous solution that is more than doubled it? size when interacting with a small DNA chain, while single chains are evident in ethanol. The related changes in the fluorescence spectra upon polymer aggregation are assigned to oscillator strength redistribution between vibronic transitions in weakly coupled H-aggregates. An enhanced single-molecule spectroscopy technique that allows full control of excitation and emission light polarization is applied to combed and decorated;,DNA chains. It is found that the organization of combed CPE-lambda DNA complexes (when dry on the surface) allows considerable variation of CPE distances and direction relative to the DNA chain. By analysis of the polarization data. energy transfer between the polymer chains in individual complexes is confirmed and their sizes estimated.
|
|
| 23. |
- Björk, Per, et al.
(författare)
-
Single molecular imaging and spectroscopy of conjugated polyelectrolytes decorated on stretched aligned DNA
- 2005
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 5:10, s. 1948-1953
-
Tidskriftsartikel (refereegranskat)abstract
- DNA is the prototype template for building nanoelectronic devices by self-assembly. The electronic functions are made possible by coordinating electronic polymer chains to DNA. This paper demonstrates two methods for fabrication of aligned and ordered DNA nanowires complexed with conjugated polyelectrolytes (CPEs). The complex can be formed either in solution prior to stretching or after stretching of the bare DNA on a surface. Molecular combing was used to stretch the complexes on surface energy patterned surfaces, and PMMA for the bare DNA. Single molecular spectroscopy, in fluorescence, and microscopy, in atomic force microscopy, give evidence for coordination of the short CPE chains to the aligned DNA.
|
|
| 24. |
- Björk, Per, et al.
(författare)
-
Soft lithographic printing of patterns of stretched DNA and DNA/electronic polymer wires by surface-energy modification and transfer
- 2006
-
Ingår i: Small. - : Wiley. - 1613-6810 .- 1613-6829. ; 2:8-9, s. 1068-1074
-
Tidskriftsartikel (refereegranskat)abstract
- Aligned and stretched λ DNA is directed to specific locations on solid substrates. Surface-energy modification of glass substrates by using patterned polydimethylsiloxane (PDMS) stamps is used to direct DNA onto the surface-energy-modified micrometer-scale pattern through molecular combing. As an alternative, patterned and nonpatterned PDMS stamps modified with polymethylmethacrylate (PMMA) are utilized to direct the stretched DNA to the desired location and the results are compared. The DNA is elongated through molecular combing on the stamp and transfer printed onto the surfaces. PMMA-modified stamps show a more defined length of the stretched DNA, as compared to bare PDMS stamps. A combination of these two methods is also demonstrated. As an application example, transfer printing of DNA decorated with a semiconducting conjugated polyelectrolyte is shown. The resulting patterned localization of stretched DNA can be utilized for functional nanodevice structures, as well as for biological applications.
|
|
| 25. |
- Björström, Cecilia M., et al.
(författare)
-
Influence of solvents and substrates on the morphology and the performance of low-bandgap polyfluorene:PCBM photovoltaic devices
- 2006
-
Ingår i: Proceedings of SPIE, the International Society for Optical Engineering. - Cardiff : SPIE - International Society for Optical Engineering. - 0277-786X .- 1996-756X. ; 6192, s. 61921X-
-
Tidskriftsartikel (refereegranskat)abstract
- Spin-coated thin films of poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (APFO-3) blended with [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) are used as the active material in polymer photovoltaic cells. Such blends are known for their tendency to phase separate during film formation. Tuning the morphology of the blend in a controlled way is one possible road towards higher efficiency. We studied the effect of adding chlorobenzene to chloroform-based blend solutions before spin-coating on the conversion efficiency of APFO-3:PCBM photodiodes, and related that to the lateral and vertical morphology of thin films of the blend. The lateral morphology is imaged by atomic force microscopy (AFM) and the vertical compositional profile is obtained by dynamic secondary ion mass spectrometry (SIMS). The profiles reveal compositional variations consisting of multilayers of alternating polymer-rich and PCBM-rich domains in the blend film spin-coated from chloroform. The vertical compositional variations are caused by surface-directed spinodal waves and are frozen in during the rapid evaporation of a highly volatile solvent. With addition of the low-vapour pressure solvent chlorobenzene, a more homogeneous vertical composition is found. The conversion efficiency for solar cells of this blend was found to be optimal for chloroform:chlorobenzene mixtures with a volume-ratio of 80:1. We have also investigated the role of the substrate on the morphology. We found that blend films spin-coated from chloroform solutions on PEDOT:PSS-coated ITO show a similar compositional structure as the films on silicon, and that changing the substrate from silicon to gold only affects the vertical phase separation in a region close to the substrate interface
|
|
| 26. |
- Campoy-Quiles, M., et al.
(författare)
-
On the determination of anistropy in polymer thin films : A comparative study of optical techniques
- 2008
-
Ingår i: Physica Status Solidi. C: Current Topics in Solid State Physics. - Weinheim, Germany : Wiley-VCH Verlagsgesellschaft. - 1862-6351. ; 5:5, s. 1270-1273
-
Tidskriftsartikel (refereegranskat)abstract
- We have used seven different techniques to measure the anisotropic refractive index of poly(vinylcarbazole) films. These techniques are: two types of variable angle spectroscopic ellipsometry (VASE) with multiple sample analysis, Interference enhanced VASE, Transmittance combined with VASE, Polarised Reflectance, beta-scan VASE, and prism coupling. We have found the average ordinary and extraordinary indices at 633 nm to be no = nTE = 1.675 ± 0.008, and ne = nTM = 1.722 ± 0.018, respectively, consistent amongst methods and conclusive on the magnitude of Δn in polymer films.
|
|
| 27. |
- Chen, Miaoxiang, 1962-, et al.
(författare)
-
High carrier mobility in low band gap polymer-based field-effect transistors
- 2005
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 87:25, s. 252105-1-252105-3
-
Tidskriftsartikel (refereegranskat)abstract
- A conjugated polymer with a low band gap of 1.21 eV, i.e., absorbing infrared light, is demonstrated as active material in field-effect transistors (FETs). The material consists of alternating fluorene units and low band gap segments with electron donor-acceptor-donor units composed of two electron-donating thiophene rings attached on both sides of a thiadiazolo-quinoxaline electron-acceptor group. The polymer is solution-processable and air-stable; the resulting FETs exhibit typical p-channel characteristics and field-effect mobility of 0.03 cm2 V−1 s−1.
|
|
| 28. |
- Dal Zilio, Simone, et al.
(författare)
-
Fabrication of a light trapping system for organic solar cells
- 2009
-
Ingår i: MICROELECTRONIC ENGINEERING. - : Elsevier BV. - 0167-9317. ; 86:4-6, s. 1150-1154
-
Tidskriftsartikel (refereegranskat)abstract
- Organic photovoltaic cells (OPV) are among the most promising systems for energy extraction and conversion from renewable energy sources. However, major problem to be solved before industrial production could become economically viable is represented by their still low conversion efficiency. The organic solar cell architectures are presently the result of a compromise between achieving complete light absorption using active layers that are thicker than the optical absorption length and achieving efficient charge collection at the electrodes which is favoured in thinner layers. We present a concept and its experimental demonstration that would solve efficiently the above trade-off problem by making use of a new type of light trapping elements. The simple fabrication scheme, based on a self-aligned UV exposure process, suggests its potential up-scalability to large systems, at low production cost.
|
|
| 29. |
- De, Swati, et al.
(författare)
-
Exciton Dynamics in Alternating Polyfluorene/Fullerene Blends
- 2008
-
Ingår i: Journal of Chemical Physics. - College Park, MD, United States : American Institute of Physics (AIP). - 0021-9606 .- 1089-7690. ; 350:1-3, s. 14-22
-
Tidskriftsartikel (refereegranskat)abstract
- Exciton dynamics in alternating copolymer/fullerene solar cell blends have been investigated using femtosecond transient absorption spectroscopy. The acceptor concentrations have been varied over a wide range. Experimental data, kinetic modeling and simulations, all indicate that the efficiency of exciton conversion to charges is 100% even at acceptor concentrations as low as 20 wt%. The reported dependence of solar cell efficiency on fullerene concentration may thus arise from other factors. However, there exists an acceptor concentration threshold (5 wt%) below which a substantial fraction of the excitations remain unquenched. The results, we believe are very relevant to optimization of performance efficiency by clever manipulation of morphology. We have also observed exciton–exciton energy transfer in these blends at low acceptor concentrations.
|
|
| 30. |
- De, Swati, et al.
(författare)
-
Geminate charge recombination in alternating polyfluorene copolymer/fullerene blends
- 2007
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 129:27, s. 8466-8472
-
Tidskriftsartikel (refereegranskat)abstract
- By measuring excited state and charge dynamics in blends of an alternating polyfluorene copolymer and fullerene derivative over nine orders in time and two orders in light intensity, we have monitored the light-induced processes from ultrafast charge photogeneration to much slower decay of charges by recombination. We find that at low light intensities relevant to solar cell operation relatively fast (∼30 ns) geminate recombination is the dominating charge decay process, while nongeminate recombination has a negligible contribution. The conclusion of our work is that under solar illumination conditions geminate recombination of charges may be directly competing with efficient charge collection in polymer/fullerene solar cells. © 2007 American Chemical Society.
|
|
