| 11. |
- Bergström, Per, 1981-, et al.
(författare)
-
Automatic in-line inspection of shape based on photogrammetry
- 2016
-
Ingår i: The 7th International Swedish Production Symposium, SPS16, Conference Proceedings. - Lund : Swedish Production Academy. ; , s. 1-9
-
Konferensbidrag (refereegranskat)abstract
- We are describing a fully automatic in-line shape inspection system for controlling the shape of moving objects on a conveyor belt. The shapes of the objects are measured using a full-field optical shape measurement method based on photogrammetry. The photogrammetry system consists of four cameras, a flash, and a triggering device. When an object to be measured arrives at a given position relative to the system, the flash and cameras are synchronously triggered to capture images of the moving object.From the captured images a point-cloud representing the measured shape is created. The point-cloud is then aligned to a CAD-model, which defines the nominal shape of the measured object, using a best-fit method and a feature-based alignment method. Deviations between the point-cloud and the CAD-model are computed giving the output of the inspection process. The computational time to create a point-cloud from the captured images is about 30 seconds and the computational time for the comparison with the CAD-model is about ten milliseconds. We report on recent progress with the shape inspection system.
|
|
| 12. |
|
|
| 13. |
|
|
| 14. |
- Boman, Mats, et al.
(författare)
-
Corrosion of copper in water free from molecular oxygen
- 2014
-
Ingår i: Corrosion Engineering, Science and Technology. - 1478-422X .- 1743-2782. ; 49:6, s. 431-434
-
Tidskriftsartikel (refereegranskat)abstract
- The possibility of copper reacting with O-2-free water has been investigated by analysis of primary corrosion products, as well as by monitoring gas pressure change by time, in long term experiments for up to 6 months in a glove box environment. We establish hydrogen production, but being of the same magnitude irrespective whether copper is present or not. Although low, the hydrogen production rate is considerably larger than what would directly correspond to the amount of analysed copper oxidation products. Our analyses encompass the changes to the surface cleaned copper (99.9999%), the water phase and the Duran glass in contact with the water (ppt quality). We have used very sensitive methods (XPS, AES, ICP-MS, XRF) while keeping contamination risks to a minimum. We conclude that the oxidation rate of copper is very low, yielding only parts of a monolayer of Cu2O after 6 months of exposure at 50 degrees C together with an accompanying very low concentration of copper species (4-5 mu g L-1) in the water phase.
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
|
|
| 18. |
- Brönnegård, Mikael, et al.
(författare)
-
Lack of evidence for estrogen and progesterone receptors in human adipose tissue.
- 1994
-
Ingår i: The Journal of steroid biochemistry and molecular biology. - 0960-0760. ; 51:5-6, s. 275-81
-
Tidskriftsartikel (refereegranskat)abstract
- We have previously presented data indicating the absence of estrogen and progesterone receptors from human adipose tissue by the use of specific antibodies (Abbott) as well as specific ligands. In addition, specific estrogen and progesterone cRNA probes did not hybridize to any mRNA species in either abdominal or gluteal/femoral adipose tissue as demonstrated by solution hybridization and Northern blot. In order to demonstrate even extremely small quantities of gene products we have now used the Polymerase chain reaction-technique to study estrogen- and progesterone receptor gene expression. Sequences corresponding to each specific cDNA were demonstrated indicating small amounts of estrogen- and progesterone receptor mRNA not detected by RNA/RNA or RNA/TNA (total nucleic acids) hybridization assays. The estrogen receptor-regulated gene pS2, however, was not induced by estrogens in human adipose tissue in contrast to a significant increase in pS2 mRNA levels after estrogen exposure to the estrogen receptor(+) cell line MCF7. From these results we conclude that estrogen- and progesterone receptors are absent from human adipose tissue and that the extremely low level of transcription of the corresponding genes is not sufficient to allow translation of the message into functional proteins.
|
|
| 19. |
|
|
| 20. |
- Chulapakorn, Thawatchart, 1988-, et al.
(författare)
-
Luminescence of silicon nanoparticles from oxygen implanted silicon
- 2018
-
Ingår i: Materials Science in Semiconductor Processing. - : Elsevier. - 1369-8001 .- 1873-4081. ; 86, s. 18-22
-
Tidskriftsartikel (refereegranskat)abstract
- Oxygen with a kinetic energy of 20 keV is implanted in a silicon wafer (100) at different fluences, followed by post-implantation thermal annealing (PIA) performed at temperatures ranging from 1000 to 1200 degrees C, in order to form luminescent silicon nanoparticles (SiNPs) and also to reduce the damage induced by the implantation. As a result of this procedure, a surface SiOx layer (with 0 < x < 2) with embedded crystalline Si nanoparticles has been created. The samples yield similar luminescence in terms of peak wavelength, lifetime, and absorption as recorded from SiNPs obtained by the more conventional method of implanting silicon into silicon dioxide. The oxygen implantation profile is characterized by elastic recoil detection (ERD) technique to obtain the excess concentration of Si in a presumed SiO2 environment. The physical structure of the implanted Si wafer is examined by grazing incidence X-ray diffraction (GIXRD). Photoluminescence (PL) techniques, including PL spectroscopy, time-resolved PL (TRPL), and photoluminescence excitation (PLE) spectroscopy are carried out in order to identify the PL origin. The results show that luminescent SiNPs are formed in a Si sample implanted by oxygen with a fluence of 2 x 10(17) atoms cm(-2) and PIA at 1000 degrees C. These SiNPs have a broad size range of 6-24 nm, as evaluated from the GIXRD result. Samples implanted at a lower fluence and/or annealed at higher temperature show only weak defect-related PL. With further optimization of the SiNP luminescence, the method may offer a simple route for integration of luminescent Si in mainstream semiconductor fabrication.
|
|
