| 1. |
- Ahrens, Lutz, et al.
(författare)
-
Analysis of per- and polyfluoroalkyl substances (PFASs) and phenolic compounds in Swedish rivers over four different seasons
- 2018
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Per- and polyfluoroalkyl substances (PFASs) and phenolic compounds are emerging organic pollutants characterized by their persistency, bioaccumulation and toxicity potential. In this study, 28 PFASs and 10 phenolic compounds were investigated in 10 Swedish rivers over four different seasons (October 2016, January 2017, April 2017 and July 2017). The objective was to investigate the levels, composition profiles, sesonal trends and fluxes for both compound classes. In total, 7 out of 28 PFASs and 9 out of 10 phenolic compounds were detected in surface water from the 10 rivers. The average concentration in all samples was 3.2 ng L-1 for ∑28PFASs (median 2.4 ng L-1, n = 40), while 230 ng L-1 for the sum of the phenolic compounds (median 0 ng L-1, n = 38). Highest average ∑28PFAS concentrations were found in Rönneån with 10 ng L-1 (median 11 ng L-1), followed by Norrström with 9.0 ng L-1 (median 9.1 ng L-1), whereas no PFASs were detected in Umeå älv and Ångermanälven. On the other hand, highest average of the sum of the phenolic compound concentrations were found in Nyköpingsån with 1500 ng L-1 (median 57 ng L-1), while for the other rivers the average ranged between 50 ng L-1 and 140 ng L-1, except for Emån where TBP was only detected in one sample with 0.33 ng L-1. This indicates that PFASs and phenolic compounds origin from different sources. The dominant PFASs were perfluorobutane sulfonic acid (PFBS, 38 % of the ∑28PFASs), perfluorooctanoic acid (PFOA, 21 %), and perfluorooctane sulfonic acid (PFOS (branched), 8.9 %), while the dominant phenolic compounds were 4nonylphenol (4-NP, 67 %), 4-tert-nonylphenol-diethoxylate (4-NP-EO2, 20 %), and 2,4,6tribromophenol (TBP, 10 %). The concentrations of PFASs and phenolic compounds were relatively constant during the four investigated seasons which indicates a relatively steady input of these two compound classes into the river systems. The daily fluxes of Σ28PFAS was estimated to be in total 220 g d-1 (81 kg year-1), whereas the daily fluxes of phenolic compounds was estimated to be 16000 g d-1 (5700 kg year-1) for all 10 investigated rivers. The Annual Average Environmental Quality Standard (AA-EQS) of the EU Water Framework Directive (WFD) was exceeded in 33% (n = 13) of the surface water samples for the sum of linear and branched PFOS and in 13% (n = 5) of the surface water samples for 4NP. This indicates that there is a potential risk for the aquatic environment. The AA-EQS of 4-octylphenol (4-OP) and pentachlorophenol (PCP) was not exceeded in any surface water sample.
|
|
| 2. |
|
|
| 3. |
- André, Hampus, 1989
(författare)
-
Assessing Mineral Resource Scarcity in a Circular Economy Context
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Due to humanity’s dependence on metal resources there are growing concerns regarding impacts related to their potential scarcity, both for current and future generations. The vision of a more circular economy suggests that extending the functional use of metals through measures aiming for resource-efficiency (RE) such as increasing technical lifetime, repairing and recycling could reduce mineral resource scarcity. However, evidence of this is limited. In addition, there is limited understanding regarding on what principles metals can be prioritized when assessing mineral resource scarcity. The aim of this thesis is to provide knowledge on mineral resource scarcity impacts of RE measures applied to metal-diverse products and on which conditions they depend. This is achieved by: 1) studying RE measures from a life cycle perspective; 2) comparing principles of prioritization between metals on which mineral resource scarcity impacts are assessed and 3) analysing how such principles (of prioritization) can affect conclusions regarding RE measures applied to metal-diverse products. The research is conducted through case studies, syntheses of literature and method development within the methodologies of life cycle assessment, material flow analysis and criticality assessment. Results indicate that effects of RE measures depend on a number of product characteristics and real-world conditions. RE measures can both increase and decrease mineral resource scarcity impacts compared to business as usual and effects vary greatly between metals. RE measures based on use extension e.g. reuse of laptops, repair of smartphones, and increasing technical lifetimes of LED lighting, have been indicated to reduce impacts through two principal features: use extension, and, increased functional recycling. However, there are risks of increasing mineral resource scarcity impacts if RE measures require additional metal use, product use extensions are short and if functional recycling is lacking. For example, repair of smartphones risks to increase the use of metals in commonly replaced components such as screens. Because of the varying effects on different metals, implementation of RE measures requires prioritizing some metals over others. The principles of prioritization give diverging results, and, are sometimes unclear and methodologically inconsistent. The thesis clarifies how they relate to concepts such as depletion, criticality, rarity and scarcity. Further it suggests that, although mineral resources are fundamentally stock resources, they can pose stock, fund and flow problems. Distinguishing between these different problems in distinct methodologies is conducive to purposive and complementary assessment by resolving methodological inconsistencies and providing accurate terminology. In the long term, scarcity is most purposively addressed by focusing on depletion of ecospheric stocks. Accordingly, the Crustal Scarcity Indicator is proposed to assess potential long term scarcity in life cycle assessment, alongside other environmental impacts. In the near term, potential scarcity for nations, industries and companies, as commonly assessed in criticality assessment, is most purposively addressed by focusing on technospheric circumstances, such as geopolitics, which can disrupt technospheric resource flows. In medium term, secondary resources in technospheric funds could be relevant, especially, with the advent of a more circular economy. Altogether, it is recommended that implementation of RE measures to metal-diverse products are based on analysis of product characteristics and real-world conditions and that effects of RE measures are assessed by methodologies which distinguish between mineral resource flows, funds and stocks so that well-informed prioritizations between metals can be made.
|
|
| 4. |
- André, Hampus, 1989
(författare)
-
Resource and Environmental Impacts of Resource-Efficiency Measures Applied to Electronic Products
- 2018
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Natural resources such as ecosystems, land, water and metals underpin the functioning of economies and human well-being, and are becoming increasingly scarce due to growth in population and affluence. Metals are increasingly demanded for their specific properties as modern technology develops. The dependence on metals is of growing concern due to the environmental impacts related, for example, to energy use and local impacts from mining, as well as the scarcity risks posed by socio-economic, geological and geopolitical constraints. Thus, there is a clear need to use metals and other natural resources more efficiently. The vision of a circular economy has been proposed as a way to do this, for example by improving durability, reusing, repairing and recycling. Such so-called resource-efficiency (RE) measures are commonly assumed to be environmentally beneficial, although the evidence is not plentiful. It is plausible that focusing on recirculating products and materials could shift burdens to other environmental impacts or life cycle stages. It has therefore been argued that a life cycle-based approach, such as in life cycle assessment (LCA), is useful to critically assess the environmental implications of RE measures. LCA aims to quantify the environmental impacts of products over their entire life cycles - from cradle to grave - assessing a wide range of impacts such as toxicity, climate change and metal resource use. For metal resource use, however, there are a number of perspectives as to what constitutes the actual environmental problem. These perspectives are represented in a variety of life cycle impact assessment methods (LCIA) which have previously been shown to give diverging results. Electronic products are emblematic of metal resource use challenges since they deploy a broad spectrum of scarce metals. This thesis aims to provide knowledge on the potential for RE measures to reduce the environmental impacts of electronic products, by addressing the following research questions: (1) What resource-efficiency measures result in reduced potential environmental impacts and resource use – for what types of products and under what conditions? (2) How does extended use of electronic products through design for increased technical lifetime, reuse and repair affect environmental impacts, particularly metal resource use? (3) How does the application of different LCIA methods for metal resource use influence interpretations of resource-efficiency measures applied to electronic products? This thesis builds on three appended papers which are all based on comparative assessments of resource efficiency, studied as resource use and environmental impacts per function delivered, using LCA and material flow analysis. The results indicate that extended use of electronic products through increasing technical lifetimes, reusing and repairing, is generally resource-efficient. Exceptions may occur, however, if extended use is insufficient to motivate impacts from producing more durable products or spare parts. Use extension of electronic products leads to resource efficiency in two distinct ways: through the intended use extension and by increasingly steering material flows into recycling. Further resource efficiency could be realised by combining RE measures over the entire life cycles of products. With regards to metal resource use, the choice of LCIA method can influence the interpretation of the results of RE measures for electronic products. Therefore, it is advisable to use several complementary LCIA methods to minimise the risks of overlooking potentially important resources issues. Furthermore, better understanding and transparency of such issues is valuable in order to provide more comprehensive information to decision-makers.
|
|
| 5. |
- Angeler, David
(författare)
-
Deathcore, creativity and scientific thinking.
- 2016
-
Ingår i: Research Ideas and Outcomes. - : Pensoft Publishers. - 2367-7163. ; 2, s. 2-6
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Major scientific breakthroughs are generally the result of materializing creative ideas, the result of an inductive process that sometimes spontaneously and unexpectedly generates a link between thoughts and/or objects that did not exist before. Creativity is the cornerstone of scientific thinking, but scientists in academia are judged by metrics of quantification that often leave little room for creative thinking. In many scientific fields, reductionist approaches are rewarded and new ideas viewed skeptically. As a result, scientific inquiry is often confined to narrow but safe disciplinary ivory towers, effectively preventing profoundly creative explorations that could yield unexpected benefits. New information This paper argues how apparently unrelated fields specifically music and belief systems can be combined in a provocative allegory to provide novel perspectives regarding patterns in nature, thereby potentially inspiring innovation in the natural, social and other sciences. The merger between basic human tensions such as those embodied by religion and music, for example the heavy metal genre of deathcore, may be perceived as controversial, challenging, and uncomfortable. However, it is an example of moving the thinking process out of unconsciously established comfort zones, through the connection of apparently unrelated entities. We argue that music, as an auditory art form, has the potential to enlighten and boost creative thinking in science. Metal, as a fast evolving and diversifying extreme form of musical art, may be particularly suitable to trigger surprising associations in scientific inquiry. This may pave the way for dealing with questions about what we don´t know that we don´t know in a fast-changing planet.
|
|
| 6. |
- Axelsson Linkowski, Weronika
(författare)
-
Managing mountains, past and present conditions for traditional summer farming and Sami reindeer husbandry in northern Scandinavia
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Traditional land use and conditions for maintenance of biodiversity are often interlinked. When land use changes and ecosystems change as a result, there is a risk to loose both the traditional ecological knowledge and the biodiversity connected to this land use. This thesis focuses on traditional land use, summer farming and Sami reindeer husbandry, in the mountain areas of northern Scandinavia (mainly Sweden), in a historical and contemporary perspective. The overall aim is to contribute to the understanding of the conditions for the traditional land use in the Scandinavian (mainly Swedish) mountains, using the concepts of traditional ecological knowledge (TEK) and a historical-ecological perspective. Both summer farming and reindeer husbandry are under strong external pressure and face large challenges today. Some of these challenges are shared and some differ between the two types of northern pastoralism. Scandinavian summer farmers experience that different views on their land use from different authorities affect them negatively. The increasing populations of large carnivores also worry the summer farmers. Recent depredation rates are in fact of the same level as historically (around 1900). Interviews showed that traditional knowledge about protective measures had eroded during years without carnivores, but also that farming practices have changed recently and that new knowledge developed. Sami plant use has been studied historically, but information about Sami plant management of Angelica archangelica was not documented. We argue that Sami ecological knowledge should be used to ensure sustainable harvest methods. Today traditional reindeer husbandry faces severe problems due to the reduction of winter grazing land by different encroachments, most importantly from modern forestry. The negative effects are even larger since increasingly difficult winter conditions create a need for a wider range of good grazing areas. Traditional knowledge is essential in the herders´ daily work, but the usability of the knowledge is severely constrained by recent changes. In the future planning of an ecologically and socially sustainable mountain management it is necessary to work with traditional land users and integrate their traditional knowledge.
|
|
| 7. |
|
|
| 8. |
- Berglund, Örjan, et al.
(författare)
-
Land use on organic soils in Sweden – a survey on the land use of organic soils within agriculture and forest lands during 1983-2014
- 2016
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Data from the Geological Survey of Sweden (SGU), the Swedish Board of Agriculture and the Swedish National Forest Inventory were used in a GIS analysis to evaluate the distribution of organic soils (OS) used for agriculture and forestry in Sweden. The status of agricultural soils and agricultural land use changes were also studied, based on the most recent data available from the SGU. The total surface area of OS in Sweden was estimated to be 6 207 284 ha (15.2% of the land surface area), which is less than reported in previous assessments (Berglund and Berglund, 2008; Berglund et al., 2009). Of the total OS area 98.2% was peat, of which 4.7% was shallow peat and 2.5% 40K peat (peat determined using gamma radiation data). The remaining 1.8% were gyttja soils. Total agricultural area under EU regulations (i.e. on the EU agriculture block map) in Sweden was 3 232 039 ha (7.9% of the land surface area) and most of this was arable land (82.8%). Pasture occupied approx. 16% of the area, the land use on the remaining 1.2% is unknown. Agricultural area on OS (AOS) based on SGU-data and the EU agriculture block map was estimated to be 225 722 ha which is 7% of the total agricultural area based on EU agriculture block maps and 9.0% based on the national maps over agricultural land areas provided by the Swedish Board of Agriculture. More than 50% of AOS was arable land whereas approx. 40% was divided between pasture and unmanaged arable land. The remaining area was wetland, unknown or other land use type. In comparison to previously studies in 2003 (Berglund and Berglund, 2008) and 2008 (Berglund et al., 2009), both the total agricultural area and AOS area have decreased, probably due to structural changes in agriculture. The decline has been sharper for the surface area of AOS than for the total agricultural area. Among the Swedish National Forest Inventory plots, 12.3% were located on OS. Land use changes recorded on the Forest Inventory plots were mostly from arable land to other land uses rather than from other land uses to arable land both in total area and in OS.
|
|
| 9. |
|
|
| 10. |
|
|
