| 1. |
- Barth, Julia M.I., et al.
(författare)
-
Genome architecture enables local adaptation of Atlantic cod despite high connectivity
- 2017
-
Ingår i: Molecular Ecology. - : Wiley. - 0962-1083 .- 1365-294X. ; 26:17, s. 4452-4466
-
Tidskriftsartikel (refereegranskat)abstract
- Adaptation to local conditions is a fundamental process in evolution; however, mechanisms maintaining local adaptation despite high gene flow are still poorly understood. Marine ecosystems provide a wide array of diverse habitats that frequently promote ecological adaptation even in species characterized by strong levels of gene flow. As one example, populations of the marine fish Atlantic cod (Gadus morhua) are highly connected due to immense dispersal capabilities but nevertheless show local adaptation in several key traits. By combining population genomic analyses based on 12K single nucleotide polymorphisms with larval dispersal patterns inferred using a biophysical ocean model, we show that Atlantic cod individuals residing in sheltered estuarine habitats of Scandinavian fjords mainly belong to offshore oceanic populations with considerable connectivity between these diverse ecosystems. Nevertheless, we also find evidence for discrete fjord populations that are genetically differentiated from offshore populations, indicative of local adaptation, the degree of which appears to be influenced by connectivity. Analyses of the genomic architecture reveal a significant overrepresentation of a large ~5 Mb chromosomal rearrangement in fjord cod, previously proposed to comprise genes critical for the survival at low salinities. This suggests that despite considerable connectivity with offshore populations, local adaptation to fjord environments may be enabled by suppression of recombination in the rearranged region. Our study provides new insights into the potential of local adaptation in high gene flow species within fine geographical scales and highlights the importance of genome architecture in analyses of ecological adaptation.
|
|
| 2. |
- Linde-Laursen, Anders, et al.
(författare)
-
På plats
- 2002
-
Ingår i: Öresundsbron på uppmärksamhetens marknad. Regionbyggare i evenemangsbranschen. - 9144040784 ; , s. 25-34
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 3. |
- Acatauassu, Diogo, et al.
(författare)
-
KHM cable model parameters for ITU-T G.Fast reference loops
- 2016
-
Ingår i: 2015 IEEE Conference on Standards for Communications and Networking, CSCN 2015. - 9781479989287 ; , s. 168-173
-
Konferensbidrag (refereegranskat)abstract
- G.Fast is a new standard for fixed broadband access that aims at achieving bit rates of 1 Gb/s over short copper loops. In order to give support to simulation, design and performance evaluation tests, the G.Fast recommendation presents examples of some wiring topologies and reference loops describing configurations expected to be found in real G.Fast deployments. Our work describes results of modeling some types of lines adopted in these reference loops by means of a low complexity and causal parametric cable model. The results indicate that the modeling approach proposed in this work is accurate for all the analyzed cases, which include high quality, medium quality and low quality cables.
|
|
| 4. |
- Berg, Jan-Erik, 1957-
(författare)
-
Wood and fibre mechanics related to the thermomechanical pulping process
- 2008
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The main objective of this thesis was to improve the understanding of some aspects on wood and fibre mechanics related to conditions in the thermomechanical pulping process. Another objective was to measure the power distribution between the rotating plates in a refiner. The thesis comprises the following parts: –A literature review aimed at describing fracture in wood and fibres as related to the thermomechanical pulping process –An experimental study of fracture in wood under compression, at conditions similar to those in feeding of chips into preheaters and chip refiners –An experimental study of the effect of impact velocity on the fracture of wood, related to conditions of fibre separation in the breaker bar zone in a chip refiner –A micromechanical model of the deterioration of wood fibres, related to the development of fibre properties during the intense treatment in the small gap in the refining zone –Measurements of the power distribution in a refiner. The fracture in wood under compression was investigated by use of acoustic emission monitoring. The wood was compressed in both lateral and longitudinal directions to predict preferred modes of deformation in order to achieve desired irreversible changes in the wood structure. It was concluded that the most efficient compression direction in this respect is longitudinal. Preferable temperature at which the compression should be carried out and specific energy input needed in order to achieve substantial changes in the wood structure were also given. The fibre separation step and specifically the effect of impact velocity on the fracture energy were studied by use of a falling weight impact tester. The fracture surfaces were also examined under a microscope. An increase in impact velocity resulted in an increase in fracture energy. In the thermomechanical pulping process the fibres are subjected to lateral compression, tension and shear which causes the creation of microcracks in the fibre wall. This damage reduces the fibre wall stiffness. A simplified analytical model is presented for the prediction of the stiffness degradation due to the damage state in a wood fibre, loaded in uni-axial tension or shear. The model was based on an assumed displacement field together with the minimum total potential energy theorem. For the damage development an energy criterion was employed. The model was applied to calculate the relevant stiffness coefficients as a function of the damage state. The energy consumption in order to achieve a certain damage state in a softwood fibre by uniaxial tension or shear load was also calculated. The energy consumption was found to be dependent on the microfibril angle in the middle secondary wall, the loading case, the thicknesses of the fibre cell wall layers, and conditions such as moisture content and temperature. At conditions, prevailing at the entrance of the gap between the plates in a refiner and at relative high damage states, more energy was needed to create cracks at higher microfibril angles. The energy consumption was lower for earlywood compared to latewood fibres. For low microfibril angles, the energy consumption was lower for loading in shear compared to tension for both earlywood and latewood fibres. Material parameters, such as initial damage state and specific fracture energy, were determined by fitting of input parameters to experimental data. Only a part of the electrical energy demand in the thermomechanical pulping process is considered to be effective in fibre separation and developing fibre properties. Therefore it is important to improve the understanding of how this energy is distributed along the refining zone. Investigations have been carried out in a laboratory single-disc refiner. It was found that a new developed force sensor is an effective way of measuring the power distribution within the refining zone. The collected data show that the tangential force per area and consequently also the power per unit area increased with radial position. The results in this thesis improve the understanding of the influence of some process parameters in thermomechanical pulping related wood and fibre mechanics such as loading rate, loading direction, moisture content and temperature to separate the fibres from the wood and to achieve desired irreversible changes in the fibre structure. Further, the thesis gives an insight of the spatial energy distribution in a refiner during thermomechanical pulping.
|
|
| 5. |
- Berg, Per, et al.
(författare)
-
Green-blue Infrastructure in Urban-Rural Landscapes– introducing Resilient Citylands
- 2013
-
Ingår i: Nordisk Arkitekturforskning. - 1102-5824. ; 2, s. 11-42
-
Tidskriftsartikel (refereegranskat)abstract
- With theglobal change crisis pushing – and new knowledge about sustainability in socio-ecological systems pulling – there presently is a window of opportunity to further our understanding about resilient landscapes. In this paper we focus on Green-blue infrastructure as a key component of human settlements. Our main focus is theoretical and conceptual but we also illustrate its values and functions to deliver recreation, preserve biodiversity, create urban structure, support cultural identity, provide ecosystems services and maintain primary production/recycling. We further elaborate on the potential for new interactions between green-blue- and built structures, discussing international cases of both practical and theoretical relevance. Resilient Citylands is proposed as a new concept useful for e.g. landscape architecture and planning. It represents a new reciprocal co-evolution for different scales: of urban and rural areas; of human settlements and natural ecosystems1, and of constructed and green-blue areas and elements within urban settings. We investigate how functionally dense, mixed-use, vibrant, inter-sensory and contemporary urban areas could be combined with cutting edge, lean and efficient rural areas.
|
|
| 6. |
- Berg, Per, et al.
(författare)
-
Resilient Citylands - Green-blue-built transport systems in Baltic Sea Region cities
- 2015
-
Konferensbidrag (refereegranskat)abstract
- The organization of transport systems for energy, food, material and people, is fundamental for upholding sustainable human habitats. Globalization and specialization has catalyzed economic growth and human development, but simultaneously has cut off geographic links between urban and rural areas and weakened interactions between urban green-blue and built up areas. Urban land-use has - during the past half-a-century been dictated by the built-up structure and car traffic planning, whereas green-blue infrastructures' ecosystems regulatory services, health-promoting properties and economic values have been attributed a lower priority. The main objective of our research is to explore ways the re-integration of urban and rural areas and functions - as well as to investigate the potential of green-blue structure values in cities in the Baltic Sea Region (BSR). We tentatively term a modern integration of urban and rural areas and functions - and of combined green-blue-built infrasystems - "Resilient Citylands". Citylands formation is strongly linked to a transport modal shift, a new transport structure and mobility functions. In our Resilient Citylands program we work with a long-term partnership between selected cities, universities and relevant planning companies to produce effective tools, methods and a portfolio of real Cityland cases - serving as models in the entire Baltic Sea Region. Target groups are researchers, planners, companies, NGO's, authorities and citizens.
|
|
| 7. |
|
|
| 8. |
- Brijs, J., et al.
(författare)
-
Prevalence and severity of cardiac abnormalities and arteriosclerosis in farmed rainbow trout (Oncorhynchus mykiss)
- 2020
-
Ingår i: Aquaculture. - : Elsevier BV. - 0044-8486 .- 1873-5622. ; 526
-
Tidskriftsartikel (refereegranskat)abstract
- Cardiovascular disease may pose a major threat to the health and welfare of farmed fish. By investigating a range of established cardiovascular disease indicators, we aimed to determine the prevalence, severity and consequences of this affliction in farmed rainbow trout (Oncorhynchus mykiss) from an open cage farm in the Baltic Sea, an open cage farm in a freshwater lake, and a land-based recirculating aquaculture system. We also aimed to identify environmental, anthropogenic and physiological factors contributing towards the development of the disease. The majority of trout possessed enlarged hearts with rounded ventricles (mean height:width ratios of 1.0–1.1 c.f. ~1.3 in wild fish) and a high degree of vessel misalignment (mean angles between the longitudinal ventricular axis and the axis of the bulbus arteriosus of 28–31 °c.f. ~23° in wild fish). The prevalence and severity of coronary arteriosclerosis was also high, as 92–100% of fish from the different aquaculture facilities exhibited coronary lesions. Mean lesion incidence and severity indices were 67–95% and 3.1–3.9, respectively, which resulted in mean coronary arterial blockages of 19–32%. To evaluate the functional significance of these findings, we modelled the effects of arterial blockages on coronary blood flow and experimentally tested the effects of coronary occlusion in a sub-sample of fish. The observed coronary blockages were estimated to reduce coronary blood flow by 34–54% while experimental coronary occlusion adversely affected the electrocardiogram of trout. Across a range of environmental (water current, predation), anthropogenic (boat traffic intensity, hatchery of origin, brand of feed pellets) and physiological factors (condition factor, haematological and plasma indices), the hatchery of origin was the main factor contributing towards the observed variation in the development of cardiovascular disease. Therefore, further research on the effects of selective breeding programs and rearing strategies on the development of cardiovascular disease is needed to improve the welfare and health of farmed fish. © 2020 The Authors
|
|
| 9. |
|
|
| 10. |
- Fertner, Antoni, et al.
(författare)
-
Applications of Backscattering for the Study of Twisted Pair Transmission Lines
- 2018
-
Ingår i: IEEE Transactions on Microwave Theory and Techniques. - 0018-9480. ; 66:12, s. 5230-5237
-
Tidskriftsartikel (refereegranskat)abstract
- The phenomenon of backscattering in copper cables has been recently observed and initially explicated. It can provide promising techniques to address the problem of loop diagnostic and maintenance. The backscattering is analyzed both in frequency and time domains. To demonstrate the practical use of the phenomenon, we estimate certain properties of the loop using wideband, high-frequency $\selevenf(f)$ measurements performed in the laboratory on real cables. The results corroborate the usefulness and accuracy of the investigated method.
|
|
