| 1. |
- Abele, H., et al.
(author)
-
Particle physics at the European Spallation Source
- 2023
-
In: Physics reports. - : Elsevier. - 0370-1573 .- 1873-6270. ; 1023, s. 1-84
-
Research review (peer-reviewed)abstract
- Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world’s brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons and neutrinos produced at the ESS for high precision (sensitivity) measurements (searches).
|
|
| 2. |
- Aguilar, J., et al.
(author)
-
Search for Leptonic CP Violation with the ESSnuSBplus Project
- 2024
-
In: Letters in High Energy Physics. - : Andromeda Publishing And Academic Services LTD. - 2632-2714.
-
Journal article (peer-reviewed)abstract
- ESSνSB is a design study for a next-generation long-baseline neutrino experiment that aims at the precise measurement of the CP-violating phase, δCP, in the leptonic sector at the second oscillation maximum. The conceptual design report published from the first phase of the project showed that after 10 years of data taking, more than 70% of the possible δCP range will be covered with 5σ C.L. to reject the no-CP-violation hypothesis. The expected value of δCP precision is smaller than 8◦ for all δCP values. The next phase of the project, the ESSνSB+, aims at using the intense muon flux produced together with neutrinos to measure the neutrino-nucleus cross-section, the dominant term of the systematic uncertainty, in the energy range of 0.2–0.6 GeV, using a Low Energy neutrinos from STORed Muons (LEnuSTORM) and a Low Energy Monitored Neutrino Beam (LEMNB) facilities.
|
|
| 3. |
- Burgman, A., et al.
(author)
-
The ESSnuSB Design Study: Overview and Future Prospects
- 2023
-
In: Universe. - : MDPI. - 2218-1997. ; 9:8
-
Research review (peer-reviewed)abstract
- ESSnuSB is a design study for an experiment to measure the CP violation in the leptonic sector at the second neutrino oscillation maximum using a neutrino beam driven by the uniquely powerful ESS linear accelerator. The reduced impact of systematic errors on sensitivity at the second maximum allows for a very precise measurement of the CP violating parameter. This review describes the fundamental advantages of measurement at the second maximum, the necessary upgrades to the ESS linac in order to produce a neutrino beam, the near and far detector complexes, and the expected physics reach of the proposed ESSnuSB experiment, concluding with the near future developments aimed at the project realization.
|
|
| 4. |
- Burgman, A., et al.
(author)
-
The European Spallation Source neutrino super-beam conceptual design report
- 2022
-
In: The European Physical Journal Special Topics. - : Springer Nature. - 1951-6355 .- 1951-6401. ; 231:21, s. 3779-3955
-
Research review (peer-reviewed)abstract
- A design study, named ESSνSB for European Spallation Source neutrino Super Beam, has been carried out during the years 2018–2022 of how the 5 MW proton linear accelerator of the European Spallation Source under construction in Lund, Sweden, can be used to produce the world’s most intense long-baseline neutrino beam. The high beam intensity will allow for measuring the neutrino oscillations near the second oscillation maximum at which the CP violation signal is close to three times higher than at the first maximum, where other experiments measure. This will enable CP violation discovery in the leptonic sector for a wider range of values of the CP violating phase δCPδCP and, in particular, a higher precision measurement of δCPδCP. The present Conceptual Design Report describes the results of the design study of the required upgrade of the ESS linac, of the accumulator ring used to compress the linac pulses from 2.86 ms to 1.2 μs, and of the target station, where the 5 MW proton beam is used to produce the intense neutrino beam. It also presents the design of the near detector, which is used to monitor the neutrino beam as well as to measure neutrino cross sections, and of the large underground far detector located 360 km from ESS, where the magnitude of the oscillation appearance of νe from νμ is measured. The physics performance of the ESSνSB research facility has been evaluated demonstrating that after 10 years of data-taking, leptonic CP violation can be detected with more than 5 standard deviation significance over 70% of the range of values that the CP violation phase angle δCPδCP can take and that δCPδCP can be measured with a standard error less than 8° irrespective of the measured value of δCPδCP. These results demonstrate the uniquely high physics performance of the proposed ESSνSBESSνSB research facility.
|
|
| 5. |
- Farricker, A., et al.
(author)
-
Beam Dynamics in the ESS Linac under the Influence of Monopole and Dipole HOMs
- 2015
-
In: Physics Procedia. - : Elsevier BV. - 1875-3892. ; 79, s. 21-29
-
Journal article (peer-reviewed)abstract
- The European Spallation Source (ESS), planned to be operational in 2019, is anticipated to be the worlds most intense neutron source. The total beam power will be 5 MW. We focus on the impact of manufacturing errors on the beam quality. In particular we assess the emittance dilution which occurs due to Higher Order Modes (HOMs) excited at a harmonic of the bunch frequency. We also discuss some alignment issues pertaining to the cavities.
|
|
