| 1. |
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Kehoe, Laura, et al.
(författare)
-
Make EU trade with Brazil sustainable
- 2019
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 364:6438, s. 341-
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)
|
|
| 5. |
- Fan, Xuge, et al.
(författare)
-
Graphene ribbons with suspended masses as transducers in ultra-small nanoelectromechanical accelerometers
- 2019
-
Ingår i: Nature Electronics. - : Nature Publishing Group. - 2520-1131. ; 2:9, s. 394-404
-
Tidskriftsartikel (refereegranskat)abstract
- Nanoelectromechanical system (NEMS) sensors and actuators could be of use in the development of next-generation mobile, wearable and implantable devices. However, these NEMS devices require transducers that are ultra-small, sensitive and can be fabricated at low cost. Here, we show that suspended double-layer graphene ribbons with attached silicon proof masses can be used as combined spring–mass and piezoresistive transducers. The transducers, which are created using processes that are compatible with large-scale semiconductor manufacturing technologies, can yield NEMS accelerometers that occupy at least two orders of magnitude smaller die area than conventional state-of-the-art silicon accelerometers. With our devices, we also extract the Young’s modulus values of double-layer graphene and show that the graphene ribbons have significant built-in stresses.
|
|
| 6. |
- Fan, Xuge, et al.
(författare)
-
Manufacture and characterization of graphene membranes with suspended silicon proof masses for MEMS and NEMS applications
- 2020
-
Ingår i: MICROSYSTEMS & NANOENGINEERING. - : NATURE PUBLISHING GROUP. - 2055-7434. ; 6:1
-
Tidskriftsartikel (refereegranskat)abstract
- Graphene's unparalleled strength, chemical stability, ultimate surface-to-volume ratio and excellent electronic properties make it an ideal candidate as a material for membranes in micro- and nanoelectromechanical systems (MEMS and NEMS). However, the integration of graphene into MEMS or NEMS devices and suspended structures such as proof masses on graphene membranes raises several technological challenges, including collapse and rupture of the graphene. We have developed a robust route for realizing membranes made of double-layer CVD graphene and suspending large silicon proof masses on membranes with high yields. We have demonstrated the manufacture of square graphene membranes with side lengths from 7 mu m to 110 mu m, and suspended proof masses consisting of solid silicon cubes that are from 5 mu mx5 mu mx16.4 mu m to 100 mu mx100 mu mx16.4 mu m in size. Our approach is compatible with wafer-scale MEMS and semiconductor manufacturing technologies, and the manufacturing yields of the graphene membranes with suspended proof masses were >90%, with >70% of the graphene membranes having >90% graphene area without visible defects. The measured resonance frequencies of the realized structures ranged from tens to hundreds of kHz, with quality factors ranging from 63 to 148. The graphene membranes with suspended proof masses were extremely robust, and were able to withstand indentation forces from an atomic force microscope (AFM) tip of up to 7000nN. The proposed approach for the reliable and large-scale manufacture of graphene membranes with suspended proof masses will enable the development and study of innovative NEMS devices with new functionalities and improved performances.
|
|
| 7. |
|
|
| 8. |
- Smith, Anderson D., et al.
(författare)
-
Graphene-based CO2 sensing and its cross-sensitivity with humidity
- 2017
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 7:36, s. 22329-22339
-
Tidskriftsartikel (refereegranskat)abstract
- We present graphene-based CO2 sensing and analyze its cross-sensitivity with humidity. In order to assess the selectivity of graphene-based gas sensing to various gases, measurements are performed in argon (Ar), nitrogen (N2), oxygen (O2), carbon dioxide (CO2), and air by selectively venting the desired gas from compressed gas bottles into an evacuated vacuum chamber. The sensors provide a direct electrical readout in response to changes in high concentrations, from these bottles, of CO2, O2, nitrogen and argon, as well as changes in humidity from venting atmospheric air. From the signal response to each gas species, the relative graphene sensitivity to each gas is extracted as a relationship between the percentage-change in graphene's resistance response to changes in vacuum chamber pressure. Although there is virtually no response from O2, N2 and Ar, there is a sizeable cross-sensitivity between CO2 and humidity occurring at high CO2 concentrations. However, under atmospheric concentrations of CO2, this cross-sensitivity effect is negligible – allowing for the use of graphene-based humidity sensing in atmospheric environments. Finally, charge density difference calculations, computed using density functional theory (DFT) are presented in order to illustrate the bonding of CO2 and water molecules on graphene and the alterations of the graphene electronic structure due to the interactions with the substrate and the molecules.
|
|
| 9. |
|
|
| 10. |
- Antelius, Mikael, et al.
(författare)
-
Wafer-Level Vacuum Sealing by Coining of Wire Bonded Gold Bumps
- 2013
-
Ingår i: Journal of microelectromechanical systems. - 1057-7157 .- 1941-0158. ; 22:6, s. 1347-1353
-
Tidskriftsartikel (refereegranskat)abstract
- This paper reports on the investigation of a novel room-temperature vacuum sealing method based on compressing wire bonded gold bumps which are placed to partially overlap the access ports into the cavity. The bump compression, which is done under vacuum, causes a material flow into the access ports, thereby hermetically sealing a vacuum inside the cavities. The sealed cavity pressure was measured by residual gas analysis to 8x10(-4) mbar two weeks after sealing. The residual gas content was found to be mainly argon, which indicates the source as outgassing inside the cavity and no measurable external leak. The seals are found to be mechanically robust and easily implemented by the use of standard commercial tools and processes.
|
|
