| 1. |
|
|
| 2. |
|
|
| 3. |
- Gondikas, Andreas P., 1981, et al.
(författare)
-
Nanomaterial Fate in Seawater: A Rapid Sink or Intermittent Stabilization?
- 2020
-
Ingår i: Frontiers in Environmental Science. - : Frontiers Media SA. - 2296-665X. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- Coastal seas and oceans receive engineered nanoparticles that are released from nano-enabled consumer and industrial products and incidental nanoparticles that are formed as byproducts of combustion and friction. The marine environment is often perceived as a rapid sink for particles, because of the high salinity promoting the attachment between particles producing heavy agglomerates that sediment on the seafloor. In this work the effect of seasonal production of extracellular polymeric substances (EPS) on particle stability is tested using seawater collected from the Gullmarn fjord in the winter, spring, and summer. A novel approach is used that is based on light scattering of the bulk particle population for tracking agglomerates and of single particles for tracking particles smaller than approximately 300 nm. Results show that organic particles formed from EPS during algal blooms are capable of stabilizing nanoparticles in marine waters for at least 48 h. In contrast, particles agglomerate rapidly in the same seawater that has previously been filtered through 0.02 mu m pore size membranes. Furthermore, particles with fibrillar shape have been detected using atomic force microscopy, supporting the argument that organic particles from EPS are responsible for the stabilization effect. These results suggest that seasonal biological activity can act as an intermittent stabilization factor for nanoparticles in marine waters.
|
|
| 4. |
- Hernroth, Bodil, et al.
(författare)
-
Manganese inhibits viability of prostate cancer cells
- 2018
-
Ingår i: Anticancer Research. - : Anticancer Research USA Inc.. - 0250-7005 .- 1791-7530. ; 38:1, s. 137-145
-
Tidskriftsartikel (refereegranskat)abstract
- Background/Aim: Androgen deprivation therapy is usually in the initial phase a successful treatment for prostate cancer but eventually most patients develop androgen-independent metastatic disease. This study investigated if manganese (Mn) reduces viability of prostate cancer via induction of apoptosis. Materials and Methods: The prostate cancer cell lines PC3, DU145 and LNCaP underwent dose- and time-dependent screening of viability, analyzed by the 3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyl-tetrazolium bromide assay. Flow cytometry was used for the cell-cycle and apoptosis analyses. Intracellular Mn concentration was measured using inductively coupled plasma-mass spectrometry. Results: At Mn concentrations of 200-1000 µM, the effect on viability was most pronounced in PC3 followed by LNCaP cells. These cell lines also showed higher intracellular concentration of Mn compared to DU145. In all cell lines, Mn increased the proportion of cells arrested in the G0/G1 phase and induced apoptosis. Conclusion: To our knowledge, this is the first report demonstrating Mn as a potential agent in prostate cancer therapy.
|
|
| 5. |
- Kaegi, R., et al.
(författare)
-
Release of TiO2 – (Nano) particles from construction and demolition landfills
- 2017
-
Ingår i: NanoImpact. - : Elsevier BV. - 2452-0748. ; 8, s. 73-79
-
Tidskriftsartikel (refereegranskat)abstract
- A large fraction of engineered nanomaterials (ENM) will be deposited in landfills and it is assumed that ENM are securely locked in landfill sites and cannot leach into the environment (e.g. surface waters). However, experimental evidence supporting this assumption is lacking, as current production volumes of ENM are still too small and/or analytical techniques not sensitive enough to allow for the detection and quantification of ENM in landfill leachates. TiO2 particles are currently used in large quantities, for example in construction materials such as paints and renders as white pigments and their sizes extend into the nano-size range. We, therefore, selected TiO2 particles as a surrogate to assess the potential release of ENM from construction and demolition (C&D) landfill sites. We collected leachate samples from a landfill over one year and used complementary analytical techniques, including inductively coupled plasma (ICP) – optical emission spectroscopy (OES), automated scanning electron microscopy (auto SEM), transmission electron microscopy (TEM) and single particle ICP - mass spectrometry (spICPMS) to quantify TiO2 particles in landfill leachates. Total elemental Ti contents were mostly around a few tens of μg L− 1 and were strongly correlated with total suspended solids. Based on the volumetric discharge of the landfill leachate water from the landfill, we estimate a total amount of ~ 0.5 kg of TiO2 particles that are released annually from the landfill. Ti concentrations derived from ICP-OES measurements were in good agreement with quantifications based on TiO2 particles detected by auto SEM analyses. spICPMS measurements indicated a number concentration of Ti-containing particles in the order of 105 mL− 1 and TEM analyses dominantly revealed nanoscale TiO2 particles with a spherical shape typically observed for TiO2 particles used as white pigments. In addition, angular TiO2 particles with a well-defined crystal habitus were detected, suggesting that also natural TiO2 particles of comparable sizes are present in the landfill leachates. The results from this study indicate that (nanoscale) TiO2 particles are released from C&D landfill sites (~ 5 g/year). Although the amount of TiO2 particles released from C&D landfill sites may still be rather low, these particles may serve as proxy for assessing the future release of ENM from C&D landfill sites, which may become relevant as an increasing use of ENM is predicted for construction materials in general. © 2017 Elsevier B.V.
|
|
| 6. |
- Micic, V., et al.
(författare)
-
Impact of Sodium Humate Coating on Collector Surfaces on Deposition of Polymer-Coated Nanoiron Particles
- 2017
-
Ingår i: Environmental Science & Technology. - : American Chemical Society (ACS). - 0013-936X .- 1520-5851. ; 51:16, s. 9202-9209
-
Tidskriftsartikel (refereegranskat)abstract
- The affinity between nanoscale zerovalent iron (nano-ZVI) and mineral surfaces hinders its mobility, and hence its delivery into contaminated aquifers. We have tested the hypothesis that the attachment of poly(acrylic acid)-coated nano-ZVI (PAA-nano-ZVI) to mineral surfaces could be limited by coating such surfaces with sodium (Na) humate prior to PAA-nano-ZVI injection. Na humate was expected to form a coating over favorable sites for PAA-nano-ZVI attachment and hence reduce the affinity of PAA-nano-ZVI for the collector surfaces through electrosteric repulsion between the two interpenetrating charged polymers. Column experiments demonstrated that a low concentration (10 mg/L) Na humate solution in synthetic water significantly improved the mobility of PAA-nano-ZVI within a standard sand medium. This effect was, however, reduced in more heterogeneous natural collector media from contaminated sites, as not an adequate of the collector sites favorable for PAA-nano-ZVI attachment within these media appear to have been screened by the Na humate. Na humate did not interact with the surfaces of acid-washed glass beads or standard Ottawa sand, which presented less surface heterogeneity. Important factors influencing the effectiveness of Na humate application in improving PAA-nano-ZVI mobility include the solution chemistry, the Na humate concentration, and the collector properties.
|
|
| 7. |
- Nowack, Bernd, et al.
(författare)
-
Progress towards the validation of modeled environmental concentrations of engineered nanomaterials by analytical measurements
- 2015
-
Ingår i: Environmental Science: Nano. - 2051-8153. ; 2:5, s. 421-428
-
Tidskriftsartikel (refereegranskat)abstract
- Environmental exposure modeling has been used extensively in the last years to obtain estimates of environmental concentrations of engineered nanomaterials (ENMs). In this perspective piece, we explore the issues when aiming to validate modeled environmental concentrations and propose options for both modelers and analytical chemists on how to proceed in the future to better compliment one another's efforts. In this context, validation means to determine the degree to which the simulation results from a model are accurate representations of the real world by comparison with analytical data. Therefore, for such a model validation procedure, analytical methods need to be available which provide information in the same subject area. Currently, a major issue with nanometrology is that a multitude of nanomaterials are present in natural systems but only some are ENMs; various other particles of natural origin are abundant in the same systems. The analytical tools available are not yet capable to distinguish the natural from engineered nanomaterials at the low ENM concentrations expected in complex environmental matrices. However, both modeling and analytical studies are able to provide an orthogonal view on nanomaterials: modeling is able to yield estimates of the presence of ENMs in various environmental compartments while analytics can provide physical characterization of ENMs in these systems with hints towards the total nanomaterial concentration. While we need to make strides to improve the two approaches separately, using the resulting data together in a mutually supportive way will advance the field of ENM risk assessment.
|
|
| 8. |
- Praetorius, A., et al.
(författare)
-
Single-particle multi-element fingerprinting (spMEF) using inductively-coupled plasma time-of-flight mass spectrometry (ICP-TOFMS) to identify engineered nanoparticles against the elevated natural background in soils
- 2017
-
Ingår i: Environmental Science: Nano. - : Royal Society of Chemistry (RSC). - 2051-8153 .- 2051-8161. ; 4:2, s. 307-314
-
Tidskriftsartikel (refereegranskat)abstract
- The discrimination of engineered nanoparticles (ENPs) from the natural geogenic background is one of the preeminent challenges for assessing their potential implications. At low ENP concentrations, most conventional analytical techniques are not able to take advantage of inherent differences (e.g. in terms of composition, isotopic signatures, element ratios, structure, shape or surface characteristics) between ENPs and naturally occurring nanoscale particles (NNPs) of similar composition. Here, we present a groundbreaking approach to overcome these limitations and enable the discrimination of man-made ENPs from NNPs through simultaneous detection of multiple elements on an individual particle level. This new analytical approach is accessible by an inductively-coupled plasma time-of-flight mass spectrometer (ICP-TOFMS) operated in single-particle mode. Machine learning is employed to classify ENPs and NNPs based on their unique elemental fingerprints and quantify their concentrations. We demonstrate the applicability of this single-particle multi-element fingerprinting (spMEF) method by distinguishing engineered cerium oxide nanoparticles (CeO2 ENPs) from natural Ce-containing nanoparticles (Ce-NNPs) in soils at environmentally relevant ENP concentrations, orders of magnitude below the natural background.
|
|
| 9. |
- Praetorius, A., et al.
(författare)
-
Strategies for determining heteroaggregation attachment efficiencies of engineered nanoparticles in aquatic environments
- 2020
-
Ingår i: Environmental Science-Nano. - : Royal Society of Chemistry (RSC). - 2051-8153 .- 2051-8161. ; 7:2, s. 351-367
-
Tidskriftsartikel (refereegranskat)abstract
- Heteroaggregation of engineered nanoparticles (ENPs) with suspended particulate matter (SPM) ubiquitous in natural waters often dominates the transport behaviour and overall fate of ENPs in aquatic environments. In order to provide meaningful exposure predictions and support risk assessment for ENPs, environmental fate and transport models require quantitative information about this process, typically in the form of the so-called attachment efficiency for heteroaggregation alpha(hetero). The inherent complexity of heteroaggregation-encompassing at least two different particle populations, various aggregation pathways and several possible attachment efficiencies (alpha values)-makes its theoretical and experimental determination challenging. In this frontier review we assess the current state of knowledge on heteroaggregation of ENPs with a focus on natural surface waters. A theoretical analysis presents relevant equations, outlines the possible aggregation pathways and highlights different types of alpha. In a second part, experimental approaches to study heteroaggregation and derive alpha values are reviewed and three possible strategies are identified: i) monitoring changes in size, ii) monitoring number or mass distribution and iii) studying indirect effects, such as sedimentation. It becomes apparent that the complexity of heteroaggregation creates various challenges and no single best method for its assessment has been developed yet. Nevertheless, many promising strategies have been identified and meaningful data can be derived from carefully designed experiments when accounting for the different concurrent aggregation pathways and clearly stating the type of alpha reported. For future method development a closer connection between experiments and models is encouraged.
|
|
| 10. |
- Tharaud, M., et al.
(författare)
-
TiO2 nanomaterial detection in calcium rich matrices by spICPMS. A matter of resolution and treatment
- 2017
-
Ingår i: Journal of Analytical Atomic Spectrometry. - : Royal Society of Chemistry (RSC). - 0267-9477 .- 1364-5544. ; 32:7, s. 1400-1411
-
Tidskriftsartikel (refereegranskat)abstract
- High Ca concentrations in complex matrices such as river waters often hamper the detection of titanium nanomaterials (TiO2 NPs) by single particle inductively coupled plasma mass spectrometry (spICPMS), because of isobaric interference of Ca-48 on the most abundant Ti isotope (Ti-48). Several approaches were used to reduce this interference while measuring TiO2 in solutions with different Ca concentrations up to 100 mg L-1. ICP-MS/MS was used with ammonia as the reaction ceLL gas and high resoLution (HR) ICP-MS was used under different resoLution settings. These approaches were compared by measuring different Ti isotopes (Ti-47 and Ti-49). spICPMS data were then treated with a deconvoLution method to filter out dissolved signals and identify the best approach to detect the Lowest possible corresponding spherical size of TiO2 NPs (D,in). ICP-MS/MS aLLowed for an important decrease of the theoretical D-min compared to standard quadrupole ICP-MS, down to 64 nm in uLtrapure water; however the sensitivity was reduced by the reaction gas and increasing Ca concentrations also increased the D-min. The comparably higher sensitivity of HR-ICP-MS aLLowed for theoretically measuring a D-min of 10 nm in uLtrapure water. Combined with the deconvoLution analysis, the highest resoLution mode in HR-ICP-MS Leads to the Lowest D-min at high Ca concentrations, even though significant broadening of the measured mass distributions occurred for TiO2 NPs at Ca concentrations up to 100 mg L-1.
|
|
