| 1. |
- Saygili, Yasemin, et al.
(författare)
-
Planar Perovskite Solar Cells with High Open-CircuitVoltage Containing a Supramolecular Iron Complex as HoleTransport Material Dopant
- 2018
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 19, s. 1-9
-
Tidskriftsartikel (refereegranskat)abstract
- n perovskite solar cells (PSCs), the most commonly used hole transport material (HTM) is spiro-OMeTAD, which is typically doped by metalorganic complexes, for example, based on Co, to improve charge transport properties and thereby enhance the photovoltaic performance of the device. In this study, we report a new hemicage-structured iron complex, 1,3,5-tris(5'-methyl-2,2'-bipyridin-5-yl)ethylbenzene Fe(III)-tris(bis(trifluoromethylsulfonyl)imide), as a p-type dopant for spiro-OMeTAD. The formal redox potential of this compound was measured as 1.29 V vs. the standard hydrogen electrode, which is slightly (20 mV) more positive than that of the commercial cobalt dopant FK209. Photoelectron spectroscopy measurements confirm that the iron complex acts as an efficient p-dopant, as evidenced in an increase of the spiro-OMeTAD work function. When fabricating planar PSCs with the HTM spiro-OMeTAD doped by 5 mol % of the iron complex, a power conversion efficiency of 19.5 % (AM 1.5G, 100 mW cm-2 ) is achieved, compared to 19.3 % for reference devices with FK209. Open circuit voltages exceeding 1.2 V at 1 sun and reaching 1.27 V at 3 suns indicate that recombination at the perovskite/HTM interface is low when employing this iron complex. This work contributes to recent endeavors to reduce recombination losses in perovskite solar cells.
|
|
| 2. |
- Zhang, Hong, et al.
(författare)
-
Multimodal host-guest complexation for efficient and stable perovskite photovoltaics
- 2021
-
Ingår i: Nature Communications. - : Springer Nature. - 2041-1723. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Formamidinium lead iodide perovskites are promising light-harvesting materials, yet stabilizing them under operating conditions without compromising optimal optoelectronic properties remains challenging. We report a multimodal host-guest complexation strategy to overcome this challenge using a crown ether, dibenzo-21-crown-7, which acts as a vehicle that assembles at the interface and delivers Cs+ ions into the interior while modulating the material. This provides a local gradient of doping at the nanoscale that assists in photoinduced charge separation while passivating surface and bulk defects, stabilizing the perovskite phase through a synergistic effect of the host, guest, and host-guest complex. The resulting solar cells show power conversion efficiencies exceeding 24% and enhanced operational stability, maintaining over 95% of their performance without encapsulation for 500h under continuous operation. Moreover, the host contributes to binding lead ions, reducing their environmental impact. This supramolecular strategy illustrates the broad implications of host-guest chemistry in photovoltaics. It remains a challenge to achieve a balance between performance and stability, as well as addressing the environmental impact of perovskite solar cells. Here, the authors propose a multimodal host-guest complexation strategy enabling these shortcomings to be addressed simultaneously.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
- Feldt, Sandra, 1983-, et al.
(författare)
-
Regeneration and Recombination kinetics in Cobalt Polypyridine based Dye-Sensitized Solar Cells, explained using Marcus theory
- 2013
-
Ingår i: Physical Chemistry, Chemical Physics - PCCP. - : Royal Society of Chemistry (RSC). - 1463-9076 .- 1463-9084. ; 15:19, s. 7087-7097
-
Tidskriftsartikel (refereegranskat)abstract
- Regeneration and recombination kinetics was investigated for dye-sensitized solar cells (DSCs) using a series of different cobalt polypyridine redox couples, ranging in redox potential in between 0.34 and 1.20 V vs. NHE. Marcus theory was applied to explain the rate of electron transfer. The regeneration kinetics for a number of different dyes (L0, D35, Y123, Z907) by most of the cobalt redox shuttles investigated occurred in the Marcus normal region. The calculated reorganization energies for the regeneration reaction ranged between 0.59 and 0.69 eV for the different organic and organometallic dyes investigated. Under the experimental conditions employed, the regeneration efficiency decreased when cobalt complexes with a driving force for regeneration of 0.4 eV and less were employed. The regeneration efficiency was found to depend on the structure of the dye and the concentration of the redox couples. [Co(bpy-pz)2]2+, which has a driving force for regeneration of 0.25 eV for the triphenylamine based organic dye, D35, was found to regenerate 84 % of the dye molecules, when a high concentration of the cobalt complex was used. Recombination kinetics between electrons in TiO2 and cobalt (III) species in the electrolyte was also studied using steady state dark current measurements. This reaction occurred in the Marcus inverted region for most of the cobalt complexes, and recombination losses are thus not expected to be problematic for D35-sensitized DSCs employing cobalt complexes with high redox potentials. Recombination mediated by surface states was, however, found to significantly influence the result for the cobalt complexes with most positive redox potentials. The calculated system reorganization energies using Marcus theory from the regeneration kinetics and steady state current measurements were very similar, indicating that they are mostly determined by the cobalt mediator.
|
|
| 7. |
- Ferdowsi, Parnian, et al.
(författare)
-
Molecular Design of Efficient Organic D-A-pi-A Dye Featuring Triphenylamine as Donor Fragment for Application in Dye-Sensitized Solar Cells
- 2018
-
Ingår i: ChemSusChem. - : WILEY-V C H VERLAG GMBH. - 1864-5631 .- 1864-564X. ; 11:2, s. 494-502
-
Tidskriftsartikel (refereegranskat)abstract
- A metal-free organic sensitizer, suitable for the application in dye-sensitized solar cells (DSSCs), has been designed, synthesized and characterized both experimentally and theoretically. The structure of the novel donor-acceptor--bridge-acceptor (D-A-pi-A) dye incorporates a triphenylamine (TPA) segment and 4-(benzo[c][1,2,5]thiadiazol-4-ylethynyl)benzoic acid (BTEBA). The triphenylamine unit is widely used as an electron donor for photosensitizers, owing to its nonplanar molecular configuration and excellent electron-donating capability, whereas 4-(benzo[c][1,2,5]thiadiazol-4-ylethynyl)benzoic acid is used as an electron acceptor unit. The influences of I-3(-)/I-, [Co(bpy)(3)](3+/2+) and [Cu(tmby)(2)](2+/+) (tmby=4,4,6,6-tetramethyl-2,2-bipyridine) as redox electrolytes on the DSSC device performance were also investigated. The maximal monochromatic incident photon-to-current conversion efficiency (IPCE) reached 81% and the solar light to electrical energy conversion efficiency of devices with [Cu(tmby)(2)](2+/+) reached 7.15%. The devices with [Co(bpy)(3)](3+/2+) and I-3(-)/I- electrolytes gave efficiencies of 5.22% and 6.14%, respectively. The lowest device performance with a [Co(bpy)(3)](3+/2+)-based electrolyte is attributed to increased charge recombination.
|
|
| 8. |
- Freitag, Marina, et al.
(författare)
-
Dye-sensitized solar cells for efficient power generation under ambient lighting
- 2017
-
Ingår i: Nature Photonics. - : NATURE PUBLISHING GROUP. - 1749-4885 .- 1749-4893. ; 11:6, s. 372-
-
Tidskriftsartikel (refereegranskat)abstract
- Solar cells that operate efficiently under indoor lighting are of great practical interest as they can serve as electric power sources for portable electronics and devices for wireless sensor networks or the Internet of Things. Here, we demonstrate a dye-sensitized solar cell (DSC) that achieves very high power-conversion efficiencies (PCEs) under ambient light conditions. Our photosystem combines two judiciously designed sensitizers, coded D35 and XY1, with the copper complex Cu(II/I)(tmby) as a redox shuttle (tmby, 4,4', 6,6'-tetramethyl-2,2'-bipyridine), and features a high open-circuit photovoltage of 1.1 V. The DSC achieves an external quantum efficiency for photocurrent generation that exceeds 90% across the whole visible domain from 400 to 650 nm, and achieves power outputs of 15.6 and 88.5 mu W cm(-2) at 200 and 1,000 lux, respectively, under illumination from a model Osram 930 warm-white fluorescent light tube. This translates into a PCE of 28.9%.
|
|
| 9. |
- Gamstedt, Heléne, 1964-
(författare)
-
Ionic Liquid Electrolytes for Photoelectrochemical Solar Cells
- 2005
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Potential electrolytes for dye-sensitized photoelectrochemical solar cells have been synthesized and their applicability has been investigated. Different experimental techniques were used in order to characterize the synthesized electrolytes, such as elemental analysis, electrospray ionisation/mass spectrometry, cyclic voltammetry, dynamic viscosity measurements, as well as impedance, Raman and NMR spectroscopy. Some crystal structures were characterized by using single crystal X-ray diffraction. In order to verify the eligibility of the ionic compounds as electrolytes for photoelectrochemical solar cells, photocurrent density/photovoltage and incident photon-to-current conversion efficiency measurements were performed, using different kinds of light sources as solar simulators. In electron kinetic studies, the electron transport times in the solar cells were investigated by using intensitymodulated photocurrent and photovoltage spectroscopy. The accumulated charge present in the semiconductor was studied in photocurrent transient measurements. The ionic liquids were successfully used as solar cell electrolytes, especially those originating from the diethyl and dibutyl-alkylsulphonium iodides. The highest overall conversion efficiency of almost 4 % was achieved by a dye-sensitized, nanocrystalline solar cell using (Bu2MeS)I:I2 (100:1) as electrolyte (Air Mass 1.5 spectrum at 100 W m-2), quite compatible with the standard efficiencies provided by organic solvent-containing cells. Several solar cells with iodine-doped metal-iodidebased electrolytes reached stable efficiencies over 2 %. The (Bu2MeS)I:I2-containing cells showed better long-term stabilities than the organic solvent-based cells, and provided the fastest electron transports as well as the highest charge accumulation. Several polypyridyl-ruthenium complexes were tested as solar cell sensitizers. No general improvements could be observed according to the addition of amphiphilic co-adsorbents to the dyes or nanopartices of titanium dioxide to the electrolytes. For ionic liquid-containing solar cells, a saturation phenomena in the short-circuit current densities emerged at increased light intensities, probably due to inherent material transport limitation within the systems. Some iodoargentates and -cuprates were structurally characterized, consisting of monomeric or polymeric entities with anionic networks or layers. A system of metal iodide crownether complexes were employed and tested as electrolytes in photoelectrochemical solar cells, though with poorer results. Also, the crystal structure of a copper-iodide-(12-crown-4) complex has been characterized
|
|
| 10. |
|
|
