| 1. |
- Aitola, Kerttu, et al.
(författare)
-
Carbon nanotube film replacing silver in high-efficiency solid-state dye solar cells employing polymer hole conductor
- 2015
-
Ingår i: Journal of Solid State Electrochemistry. - : Springer Science and Business Media LLC. - 1432-8488 .- 1433-0768. ; 19:10, s. 3139-3144
-
Tidskriftsartikel (refereegranskat)abstract
- A semitransparent, flexible single-walled carbon nanotube (SWCNT) film was efficiently used in place of evaporated silver as the counter electrode of a poly(3,4-ethylenedioxythiophene) polymer-based solid-state dye solar cell (SSDSC): the solar-to-electrical energy conversion efficiency of the SWCNT-SSDSC was 4.8 % when it was 5.2 % for the Ag-SSDSC. The efficiency difference stemmed from a 0.1-V difference in the open-circuit voltage, whose reason was speculated to be related to the different recombination processes in the two types of SSDSCs.
|
|
| 2. |
- Aitola, Kerttu, et al.
(författare)
-
Highly catalytic carbon nanotube counter electrode on plastic for dye solar cells utilizing cobalt-based redox mediator
- 2013
-
Ingår i: Electrochimica Acta. - : Elsevier BV. - 0013-4686 .- 1873-3859. ; 111, s. 206-209
-
Tidskriftsartikel (refereegranskat)abstract
- A flexible, slightly transparent and metal-free random network of single-walled carbon nanotubes (SWCNTs) on plain polyethylene terephthalate (PET) plastic substrate outperformed platinum on conductive glass and on plastic as the counter electrode (CE) of a dye solar cell employing a Co(II/III)tris(2,2'-bipyridyl) complex redox mediator in 3-methoxypropionitrile solvent. The CE charge-transfer resistance of the SWCNT film was 0.60 Omega cm(2), 4.0 Omega cm(2) for sputtered platinum on indium tin oxide-PET substrate and 1.7 Omega cm(2) for thermally deposited Pt on fluorine-doped tin oxide glass, respectively. The solar cell efficiencies were in the same range, thus proving that an entirely carbon-based SWCNT film on plastic is as good CE candidate for the Co electrolyte. (C) 2013 Elsevier Ltd. All rights reserved.
|
|
| 3. |
- Halme, Janne, et al.
(författare)
-
Spectral characteristics of light harvesting, electron injection, and steady-state charge collection in pressed TiO2 dye solar cells
- 2008
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 112:14, s. 5623-5637
-
Tidskriftsartikel (refereegranskat)abstract
- The factors that limit photocurrent in dye solar cells (DSC) were studied by incident-photon-to-collected-electron efficiency (eta(IPCE)), optical, and photovoltaic measurements. Nanostructured TiO2 photoelectrodes were prepared by compression technique on glass substrates, and half of them were given an additional heat treatment at 450 degrees C. The spectral absorbed-photon-to-collected-electron efficiency (eta(APCE)) of the cells was determined as a function of the photoelectrode film thickness (d) and direction of illumination and analyzed in terms of electron injection (eta(INJ)) and collection (eta(COL)) efficiency. The cells with pressed-only photoelectrodes gave significantly lower photocurrents yet their eta(APCE), and thus eta(COL), increased significantly with increasing d. To analyze this result quantitatively, methods were formulated based on the standard diffusion model of electron transport in nanostructured photoelectrodes for the factorization of experimental eta(APCF) data into eta(INJ) and eta(COL) parts and subsequent estimation of the effective steady-state electron diffusion length (L). Consistent decoupling of eta(INJ) and eta(COL) was reached in a spectral region where electron generation rate was independent of d. eta(INJ) was low and strongly wavelength-dependent, which was attributed to a poor energetic matching between dye excited states and TiO2 acceptor states due to unfavorable electrolyte composition. L increased systematically with d in both types of cells. Consistent with the increase of eta(IPCE) with light intensity, the result was attributed qualitatively to the electron concentration dependence of L and for a small part to decrease of film porosity with d. The diffusion model and its predictions were reviewed, and its validity in the present case was discussed critically.
|
|
| 4. |
- Hamed, Tareq Abu, et al.
(författare)
-
Multiscale in modelling and validation for solar photovoltaics
- 2018
-
Ingår i: EPJ Photovoltaics. - : EDP Sciences. - 2105-0716. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- Photovoltaics is amongst the most important technologies for renewable energy sources, and plays a key role in the development of a society with a smaller environmental footprint. Key parameters for solar cells are their energy conversion efficiency, their operating lifetime, and the cost of the energy obtained from a photovoltaic system compared to other sources. The optimization of these aspects involves the exploitation of new materials and development of novel solar cell concepts and designs. Both theoretical modeling and characterization of such devices require a comprehensive view including all scales from the atomic to the macroscopic and industrial scale. The different length scales of the electronic and optical degrees of freedoms specifically lead to an intrinsic need for multiscale simulation, which is accentuated in many advanced photovoltaics concepts including nanostructured regions. Therefore, multiscale modeling has found particular interest in the photovoltaics community, as a tool to advance the field beyond its current limits. In this article, we review the field of multiscale techniques applied to photovoltaics, and we discuss opportunities and remaining challenges.
|
|
| 5. |
|
|
| 6. |
- Kokkonen, Mikko, et al.
(författare)
-
Advanced research trends in dye-sensitized solar cells
- 2021
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 9:17, s. 10527-10545
-
Forskningsöversikt (refereegranskat)abstract
- Dye-sensitized solar cells (DSSCs) are an efficient photovoltaic technology for powering electronic applications such as wireless sensors with indoor light. Their low cost and abundant materials, as well as their capability to be manufactured as thin and light-weight flexible solar modules highlight their potential for economic indoor photovoltaics. However, their fabrication methods must be scaled to industrial manufacturing with high photovoltaic efficiency and performance stability under typical indoor conditions. This paper reviews the recent progress in DSSC research towards this goal through the development of new device structures, alternative redox shuttles, solid-state hole conductors, TiO2 photoelectrodes, catalyst materials, and sealing techniques. We discuss how each functional component of a DSSC has been improved with these new materials and fabrication techniques. In addition, we propose a scalable cell fabrication process that integrates these developments to a new monolithic cell design based on several features including inkjet and screen printing of the dye, a solid state hole conductor, PEDOT contact, compact TiO2, mesoporous TiO2, carbon nanotubes counter electrode, epoxy encapsulation layers and silver conductors. Finally, we discuss the need to design new stability testing protocols to assess the probable deployment of DSSCs in portable electronics and internet-of-things devices.
|
|
