| 1. |
- Bericat Vadell, Robert, et al.
(författare)
-
Single-electron transfer reactions on surface-modified gold plasmons
- 2023
-
Ingår i: Materials Today Chemistry. - : Elsevier. - 2468-5194. ; 34
-
Tidskriftsartikel (refereegranskat)abstract
- Photoredox catalysis's relevance in organic synthesis research and innovation will increase in the coming decades. However, the processes rely almost exclusively on expensive noble metal complexes, most notably iridium complexes, to absorb light and transfer a single charge to a substrate or a catalyst to initiate cascade transformations. Light-triggered plasmon resonances generate a non-Fermi-Dirac energy distribution with many hot carriers that decay in similar to 1 ps. Their ultrafast relaxation makes performing single electron transfer (SET) transformations challenging. Herein, a novel photosystem is proposed based on surface-modified gold nanoparticles (aka plasmon "molecularization"), which improved charge separation and, more importantly, enabled SET reactions, expanding the portfolio of photocatalysts available for photoredox catalysis. The photosystem was made into an electrode, permitting its use in photoelectrochemical arrangements that leverage electro- and photo-chemical approaches' benefits and chemical engineering solutions, helping the synthetic chemistry efforts towards greener synthesis and synthesis of more complex structures on a scale.
|
|
| 2. |
- Dey, Ananta, et al.
(författare)
-
Exploiting hot electrons from a plasmon nanohybrid system for the photoelectroreduction of CO2
- 2024
-
Ingår i: Communications Chemistry. - : Springer Nature. - 2399-3669. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- Plasmonic materials convert light into hot carriers and heat to mediate catalytic transformation. The participation of hot carriers (photocatalysis) remains a subject of vigorous debate, often argued on the basis that carriers have ultrashort lifetime incompatible with drive photochemical processes. This study utilises plasmon hot electrons directly in the photoelectrocatalytic reduction of CO2 to CO via a Ppasmonic nanohybrid. Through the deliberate construction of a plasmonic nanohybrid system comprising NiO/Au/ReI(phen-NH2)(CO)3Cl (phen-NH2 = 1,10-Phenanthrolin-5-amine) that is unstable above 580 K; it was possible to demonstrate hot electrons are the main culprit in CO2 reduction. The engagement of hot electrons in the catalytic process is derived from many approaches that cover the processes in real-time, from ultrafast charge generation and separation to catalysis occurring on the minute scale. Unbiased in situ FTIR spectroscopy confirmed the stepwise reduction of the catalytic system. This, coupled with the low thermal stability of the ReI(phen-NH2)(CO)3Cl complex, explicitly establishes plasmonic hot carriers as the primary contributors to the process. Therefore, mediating catalytic reactions by plasmon hot carriers is feasible and holds promise for further exploration. Plasmonic nanohybrid systems can leverage plasmon’s unique photophysics and capabilities because they expedite the carrier’s lifetime.
|
|
| 3. |
- Fritze, Stefan, et al.
(författare)
-
Elemental distribution and fracture properties of magnetron sputtered carbon supersaturated tungsten films
- 2024
-
Ingår i: Surface & Coatings Technology. - : Elsevier BV. - 0257-8972 .- 1879-3347. ; 477
-
Tidskriftsartikel (refereegranskat)abstract
- The combination of strength and toughness is a major driving force for alloy design of protective coatings, and nanocrystalline tungsten (W)-alloys have shown to be promising candidates for combining strength and toughness. Here we investigate the elemental distribution and the fracture toughness of carbon (C) alloyed W thin films prepared by non-reactive magnetron sputtering. W:C films with up to ~4 at.% C crystallize in a body-centered-cubic structure with a strong 〈hh0〉texture, and no additional carbide phases are observed in the diffraction pattern. Atom probe tomography and X-ray photoelectron spectroscopy confirmed the formation of such a supersaturated solid solution. The pure W film has a hardness ~13 GPa and the W:C films exhibit a peak hardness of ~24 GPa. In-situ micromechanical cantilever bending tests show that the fracture toughness decreases from ~4.5 MPa·m1/2 for the W film to ~3.1 MPa·m1/2 for W:C films. The results show that C can significantly enhance the hardness of W thin films while retaining a high fracture toughness.
|
|
| 4. |
- Gopakumar, Geethanjali, 1992-, et al.
(författare)
-
X-ray Induced Fragmentation of Protonated Cystine
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Protein structure determination using high-intensity X-ray sources induces damage in the protein. Disulfide bridges, formed between two cysteine amino acid residues stabilize the protein structure. Owing to the higher absorption cross-section of sulfur for X-ray photons, and a large number of electrons released from sulfur atoms, these disulfide bridges are hot spots for a higher level of noise in structural studies. But it is yet to be understood how exactly the damage occurs through the interaction of the disulfide bridges with photons. Here we study the fragmentation of protonated cystine in the gas phase, which is the dimer of cysteine, by irradiation with X-rays across the sulfur L-edge using an electrospray ionization source (ESI) in combination with an ion trap. This is complemented with the calculation of the sulfur NEXAFS spectrum on the level of Restricted Open-Shell Configuration Interaction (ROCIS) and Density Functional Theory (DFT) calculations for molecular orbital visualization as well as Molecular Dynamics (MD) simulations for the fragmentation of triply charged cystine ions. We have deduced a possible pathway of fragmentation upon excitation and ionization of S 2p electrons by combining the experiments and simulations. The disulfide bridge breaks for resonant excitation at lower energies but remains intact upon higher energy resonant excitation and upon ionization of S 2p. The larger fragments formed subsequently break into smaller fragments.
|
|
| 5. |
- Gopakumar, Geethanjali, 1992-, et al.
(författare)
-
X-ray Induced Fragmentation of Protonated Cystine
- 2022
-
Ingår i: Journal of Physical Chemistry A. - : American Chemical Society (ACS). - 1089-5639 .- 1520-5215. ; 126:9, s. 1496-1503
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate site-specific X-ray induced fragmentation across the sulfur L-edge of protonated cystine, the dimer of the amino acid cysteine. Ion yield NEXAFS were performed in the gas phase using electrospray ionization (ESI) in combination with an ion trap. The interpretation of the sulfur L-edge NEXAFS spectrum is supported by Restricted Open-Shell Configuration Interaction (ROCIS) calculations. The fragmentation pathway of triply charged cystine ions was modeled by Molecular Dynamics (MD) simulations. We have deduced a possible pathway of fragmentation upon excitation and ionization of S 2p electrons. The disulfide bridge breaks for resonant excitation at lower photon energies but remains intact upon higher energy resonant excitation and upon ionization of S 2p. The larger fragments initially formed subsequently break into smaller fragments.
|
|
| 6. |
|
|
| 7. |
- Kalha, Curran, et al.
(författare)
-
Hard x-ray photoelectron spectroscopy : a snapshot of the state-of-the-art in 2020
- 2021
-
Ingår i: Journal of Physics. - : Institute of Physics Publishing (IOPP). - 0953-8984 .- 1361-648X. ; 33:23
-
Forskningsöversikt (refereegranskat)abstract
- Hard x-ray photoelectron spectroscopy (HAXPES) is establishing itself as an essential technique for the characterisation of materials. The number of specialised photoelectron spectroscopy techniques making use of hard x-rays is steadily increasing and ever more complex experimental designs enable truly transformative insights into the chemical, electronic, magnetic, and structural nature of materials. This paper begins with a short historic perspective of HAXPES and spans from developments in the early days of photoelectron spectroscopy to provide an understanding of the origin and initial development of the technique to state-of-the-art instrumentation and experimental capabilities. The main motivation for and focus of this paper is to provide a picture of the technique in 2020, including a detailed overview of available experimental systems worldwide and insights into a range of specific measurement modi and approaches. We also aim to provide a glimpse into the future of the technique including possible developments and opportunities.
|
|
| 8. |
- Lindblad, Rebecka, et al.
(författare)
-
Electronic Structure of CH3NH3PbX3 Perovskites : Dependence on the Halide Moiety
- 2015
-
Ingår i: The Journal of Physical Chemistry C. - American Chemical Society : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 119:4, s. 1818-1825
-
Tidskriftsartikel (refereegranskat)abstract
- A combination of measurements using photoelectron spectroscopy and calculations using density functional theory (DFT) was applied to compare the detailed electronic structure of the organolead halide perovskites CH3NH3PbI3 and CH3NH3PbBr3. These perovskite materials are used to absorb light in mesoscopic and planar heterojunction solar cells. The Pb 4f core level is investigated to get insight into the chemistry of the two materials. Valence level measurments are also included showing a shift of the valence band edges where there is a higher binding energy of the edge for the CH3NH3PbBr3 perovskite. These changes are supported by the theoretical calculations which indicate that the differences in electronic structure are mainly caused by the nature of the halide ion rather than structural differences. The combination of photoelectron spectroscopy measurements and electronic structure calculations is essential to disentangle how the valence band edge in organolead halide perovskites is governed by the intrinsic difference in energy levels of the halide ions from the influence of chemical bonding.
|
|
| 9. |
- Sundberg, Jill, et al.
(författare)
-
Understanding the effects of sputter damage in W–S thin films by HAXPES
- 2014
-
Ingår i: Applied Surface Science. - : Elsevier. - 0169-4332 .- 1873-5584. ; 305, s. 203-213
-
Tidskriftsartikel (refereegranskat)abstract
- WS2 is an excellent solid lubricant in dry conditions, and can be applied as thin films. The analysis of WS2 and WS2-based films by x-ray photoelectron spectroscopy (XPS) can be challenging, due to contaminationand oxidized material on the surface. The investigations have traditionally therefore included sputter etching by ion bombardment, which however leads to changes of the remaining material. In this study, hard x-ray photoelectron spectroscopy (HAXPES) has been used to study W–S films deposited bymagnetron sputtering. High-resolution reference measurements for crystalline WS2 and metallic W are also presented. The W–S films were analyzed before and after sputter cleaning by Ar+ ion bombardment, using photon energies of 3 and 6 keV. The as-deposited films were found to consist mainly of a WSx phase,similar to WS2 but with a broader range of chemical states. It is shown that ion bombardment of the surface not only removes the outermost oxidized material, but also leads to preferential sputtering of sulfur and the formation of metallic tungsten. The results are of strong interest for the analysis of WS2-based materials, as they demonstrate that spectra from sputter-cleaned films include effects of sputter damage,and may not be representative of the original sample.
|
|
| 10. |
- Villamayor, Michelle Marie S., et al.
(författare)
-
Wafer-sized WS2 monolayer deposition by sputtering
- 2022
-
Ingår i: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3364 .- 2040-3372. ; 14:17, s. 6331-6338
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate that tungsten disulphide (WS2) with thicknesses ranging from monolayer (ML) to several monolayers can be grown on SiO2/Si, Si, and Al2O3 by pulsed direct current-sputtering. The presence of high quality monolayer and multilayered WS2 on the substrates is confirmed by Raman spectroscopy since the peak separations between the A(1g)-E-2g and A(1g)-2LA vibration modes exhibit a gradual increase depending on the number of layers. X-ray diffraction confirms a textured (001) growth of WS2 films. The surface roughness measured with atomic force microscopy is between 1.5 and 3 angstrom for the ML films. The chemical composition WSx (x = 2.03 +/- 0.05) was determined from X-ray Photoelectron Spectroscopy. Transmission electron microscopy was performed on a multilayer film to show the 2D layered structure. A unique method for growing 2D layers directly by sputtering opens up the way for designing 2D materials and batch production of high-uniformity and high-quality (stochiometric, large grain sizes, flatness) WS2 films, which will advance their practical applications in various fields.
|
|
