| 1. |
- Tran, K. B., et al.
(författare)
-
The global burden of cancer attributable to risk factors, 2010-19: a systematic analysis for the Global Burden of Disease Study 2019
- 2022
-
Ingår i: Lancet. - 0140-6736. ; 400:10352, s. 563-591
-
Tidskriftsartikel (refereegranskat)abstract
- Background Understanding the magnitude of cancer burden attributable to potentially modifiable risk factors is crucial for development of effective prevention and mitigation strategies. We analysed results from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019 to inform cancer control planning efforts globally. Methods The GBD 2019 comparative risk assessment framework was used to estimate cancer burden attributable to behavioural, environmental and occupational, and metabolic risk factors. A total of 82 risk-outcome pairs were included on the basis of the World Cancer Research Fund criteria. Estimated cancer deaths and disability-adjusted life-years (DALYs) in 2019 and change in these measures between 2010 and 2019 are presented. Findings Globally, in 2019, the risk factors included in this analysis accounted for 4.45 million (95% uncertainty interval 4.01-4.94) deaths and 105 million (95.0-116) DALYs for both sexes combined, representing 44.4% (41.3-48.4) of all cancer deaths and 42.0% (39.1-45.6) of all DALYs. There were 2.88 million (2.60-3.18) risk-attributable cancer deaths in males (50.6% [47.8-54.1] of all male cancer deaths) and 1.58 million (1.36-1.84) risk-attributable cancer deaths in females (36.3% [32.5-41.3] of all female cancer deaths). The leading risk factors at the most detailed level globally for risk-attributable cancer deaths and DALYs in 2019 for both sexes combined were smoking, followed by alcohol use and high BMI. Risk-attributable cancer burden varied by world region and Socio-demographic Index (SDI), with smoking, unsafe sex, and alcohol use being the three leading risk factors for risk-attributable cancer DALYs in low SDI locations in 2019, whereas DALYs in high SDI locations mirrored the top three global risk factor rankings. From 2010 to 2019, global risk-attributable cancer deaths increased by 20.4% (12.6-28.4) and DALYs by 16.8% (8.8-25.0), with the greatest percentage increase in metabolic risks (34.7% [27.9-42.8] and 33.3% [25.8-42.0]). Interpretation The leading risk factors contributing to global cancer burden in 2019 were behavioural, whereas metabolic risk factors saw the largest increases between 2010 and 2019. Reducing exposure to these modifiable risk factors would decrease cancer mortality and DALY rates worldwide, and policies should be tailored appropriately to local cancer risk factor burden. Copyright (C) 2022 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.
|
|
| 2. |
|
|
| 3. |
- Clark, Andrew G., et al.
(författare)
-
Evolution of genes and genomes on the Drosophila phylogeny
- 2007
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 450:7167, s. 203-218
-
Tidskriftsartikel (refereegranskat)abstract
- Comparative analysis of multiple genomes in a phylogenetic framework dramatically improves the precision and sensitivity of evolutionary inference, producing more robust results than single-genome analyses can provide. The genomes of 12 Drosophila species, ten of which are presented here for the first time (sechellia, simulans, yakuba, erecta, ananassae, persimilis, willistoni, mojavensis, virilis and grimshawi), illustrate how rates and patterns of sequence divergence across taxa can illuminate evolutionary processes on a genomic scale. These genome sequences augment the formidable genetic tools that have made Drosophila melanogaster a pre-eminent model for animal genetics, and will further catalyse fundamental research on mechanisms of development, cell biology, genetics, disease, neurobiology, behaviour, physiology and evolution. Despite remarkable similarities among these Drosophila species, we identified many putatively non-neutral changes in protein-coding genes, non-coding RNA genes, and cis-regulatory regions. These may prove to underlie differences in the ecology and behaviour of these diverse species.
|
|
| 4. |
|
|
| 5. |
- Genene, Zewdneh, 1983, et al.
(författare)
-
Comparative study on the effects of alkylsilyl and alkylthio side chains on the performance of fullerene and non-fullerene polymer solar cells
- 2020
-
Ingår i: Organic Electronics: physics, materials, applications. - : Elsevier BV. - 1566-1199. ; 77
-
Tidskriftsartikel (refereegranskat)abstract
- Two novel high gap donor polymers – PBDTTSi-TzBI and PBDTTS-TzBI, based on imide-fused benzotriazole (TzBI) with asymmetric side chains and alkylsilyl (Si) or alkylthio (S) substituted 4,8-di(thien-2-yl)benzo-[1,2-b:4,5-b′]dithiophene (BDTT) – are successfully synthesized. The effect of the side chain variation on the photophysical, morphological and photovoltaic properties of blends of these polymers with fullerene and non-fullerene acceptors is investigated. The PBDTTSi-TzBI polymer shows a deeper highest occupied molecular orbital energy level, which results in higher open-circuit voltages. Nevertheless, the polymer solar cells fabricated using PBDTTS-TzBI in combination with PC71BM afford a higher power conversion efficiency of 7.3% (vs 4.0% for PBDTTSi-TzBI:PC71BM). By using the non-fullerene acceptor ITIC, the absorption of the blends extends to 850 nm and better device efficiencies are achieved, 6.9% and 9.6% for PBDTTSi-TzBI:ITIC and BDTTS-TzBI:ITIC, respectively. The better performance of the PBDTTS-TzBI:ITIC-based devices is attributed to the strong and broad absorption and balanced charge transport, and is among the best performances reported for non-fullerene solar cells based on TzBI-containing polymer donors.
|
|
| 6. |
|
|
| 7. |
- Negash, Asfaw, et al.
(författare)
-
Diketopyrrolopyrrole-based terpolymers with tunable broad band absorption for fullerene and fullerene-free polymer solar cells
- 2019
-
Ingår i: Journal of Materials Chemistry C. - : Royal Society of Chemistry (RSC). - 2050-7534 .- 2050-7526. ; 7:11, s. 3375-3384
-
Tidskriftsartikel (refereegranskat)abstract
- A series of random terpolymers with donor-acceptor-donor-acceptor molecular configuration, comprising fluorinated benzotriazole (FTAZ) and thienothiophene-capped diketopyrrolopyrrole (TTDPP) as the first and second electron-accepting moieties and thienyl-substituted benzodithiophene (BDTT) as the electron-donating unit, are designed for polymer solar cells. By tuning the ratio of TTDPP and FTAZ, the optoelectronic properties of the terpolymers are systematically varied. All materials exhibit a broad absorption window spanning from 300 to 900 nm, illustrating the success of the terpolymer approach. Fullerene-based polymer solar cells fabricated from the terpolymer with the highest content of TTDPP afford a power conversion efficiency of 5.7%, with a short-circuit current density of 15.2 mA cm -2 . On the other hand, solar cell devices composed of the terpolymer with the lowest content of TTDPP and the narrow gap non-fullerene acceptor IEICO-4F exhibit a higher efficiency of 6.3%, with an enhanced short-circuit current density of 17.5 mA cm -2 , as a result of a better complementarity in the absorption of the donor and acceptor materials and well-balanced charge carrier mobilities. This efficiency represents the best value for fullerene-free polymer solar cells based on DPP-containing polymers to date.
|
|
| 8. |
- Negash, Asfaw, et al.
(författare)
-
Ladder-type high gap conjugated polymers based on indacenodithieno[3,2-b]thiophene and bithiazole for organic photovoltaics
- 2019
-
Ingår i: Organic Electronics: physics, materials, applications. - : Elsevier BV. - 1566-1199. ; 74, s. 211-217
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019 Elsevier B.V. Two push-pull type conjugated polymers - PIDTT−BTz and PIDTT−DTBTz, based on the ladder-type donor unit indacenodithieno[3,2-b]thiophene (IDTT) and bithiazole (BTz) as acceptor component - are designed and synthesized for photovoltaic applications. The polymers exhibit relatively high optical gaps of ~2.0 eV with strong absorption in the range of 400–600 nm, rendering them of particular interest for the harvesting of indoor light and/or multijunction devices. Electrochemical investigations indicate a lower highest occupied molecular orbital energy level (−5.44 eV) for PIDTT−BTz as compared to PIDTT−DTBTz (−5.36 eV), enabling to achieve a higher open-circuit voltage. Under solar illumination, the best power conversion efficiency (5.1%) is achieved for the combination PIDTT−DTBTz:PC71BM (compared to 4.6% for PIDTT−BTz:PC71BM).
|
|
| 9. |
|
|
| 10. |
|
|
