| 1. |
- Ajjan, Fátima, 1986-, et al.
(författare)
-
Doped Conjugated Polymer Enclosing a Redox Polymer : Wiring Polyquinones with Poly(3,4‐Ethylenedioxythiophene)
- 2020
-
Ingår i: Advanced Energy and Sustainability Research. - : John Wiley & Sons. - 2699-9412. ; 1:2
-
Tidskriftsartikel (refereegranskat)abstract
- The mass implementation of renewable energies is limited by the absence of efficient and affordable technology to store electrical energy. Thus, the development of new materials is needed to improve the performance of actual devices such as batteries or supercapacitors. Herein, the facile consecutive chemically oxidative polymerization of poly(1-amino-5-chloroanthraquinone) (PACA) and poly(3,4-ethylenedioxythiophene (PEDOT) resulting in a water dispersible material PACA-PEDOT is shown. The water-based slurry made of PACA-PEDOT nanoparticles can be processed as film coated in ambient atmosphere, a critical feature for scaling up the electrode manufacturing. The novel redox polymer electrode is a nanocomposite that withstands rapid charging (16 A g−1) and delivers high power (5000 W kg−1). At lower current density its storage capacity is high (198 mAh g−1) and displays improved cycling stability (60% after 5000 cycles). Its great electrochemical performance results from the combination of the redox reversibility of the quinone groups in PACA that allows a high amount of charge storage via Faradaic reactions and the high electronic conductivity of PEDOT to access to the redox-active sites. These promising results demonstrate the potential of PACA-PEDOT to make easily organic electrodes from a water-coating process, without toxic metals, and operating in non-flammable aqueous electrolyte for large scale pseudocapacitors.
|
|
| 2. |
- Harillo-Baños, Albert, et al.
(författare)
-
High-Throughput Screening of Blade-Coated Polymer:Polymer Solar Cells: Solvent Determines Achievable Performance
- 2022
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 15:4
-
Tidskriftsartikel (refereegranskat)abstract
- Optimization of a new system for organic solar cells is a multiparametric analysis problem that requires substantial efforts in terms of time and resources. The strong microstructure-dependent performance of polymer:polymer cells makes them particularly difficult to optimize, or to translate previous knowledge from spin coating into more scalable techniques. In this work, the photovoltaic performance of blade-coated devices was studied based on the promising polymer:polymer system PBDB-T and PF5-Y5 as donor and acceptor, respectively. Using the recently developed high-throughput methodology, the system was optimized for multiple variables, including solvent system, active layer composition, ratio, and thickness, among others, by fabricating more than 500 devices with less than 24 mg of each component. As a result, the power conversion efficiency of the blade-coated devices varied from 0.08 to 6.43 % in the best device. The performed statistical analysis of the large experimental data obtained showed that solvent selection had the major impact on the final device performance due to its influence on the active layer microstructure. As a conclusion, the use of the plot of the device efficiency in the Hansen space was proposed as a powerful tool to guide solvent selection in organic photovoltaics.
|
|
| 3. |
- Riera-Galindo, Sergi, et al.
(författare)
-
Impact of Singly Occupied Molecular Orbital Energy on the n-Doping Efficiency of Benzimidazole Derivatives
- 2019
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 11:41, s. 37981-37990
-
Tidskriftsartikel (refereegranskat)abstract
- We investigated the impact of singly occupied molecular orbital (SOMO) energy on the n-doping efficiency of benzimidazole derivatives. By designing and synthesizing a series of new air-stable benzimidazole-based dopants with different SOMO energy levels, we demonstrated that an increase of the dopant SOMO energy by only similar to 0.3 eV enhances the electrical conductivity of a benchmark electron-transporting naphthalenediimide-bithiophene polymer by more than 1 order of magnitude. By combining electrical, X-ray diffraction, and electron paramagnetic resonance measurements with density functional theory calculations and analytical transport simulations, we quantitatively characterized the conductivity, Seebeck coefficient, spin density, and crystallinity of the doped polymer as a function of the dopant SOMO energy. Our findings strongly indicate that charge and energy transport are dominated by the (relative) position of the SOMO level, whereas morphological differences appear to play a lesser role. These results set molecular-design guidelines for next-generation n-type dopants.
|
|
| 4. |
- Riera-Galindo, Sergi, et al.
(författare)
-
Organic Semiconductor/Polymer Blend Films for Organic Field-Effect Transistors
- 2019
-
Ingår i: Advanced Materials Technologies. - : WILEY. - 2365-709X. ; 4:9
-
Forskningsöversikt (refereegranskat)abstract
- The development of low-cost printed organic electronics entails the processing of active organic semiconductors (OSCs) through solution-based techniques. However, the preparation of large-area uniform and reproducible films based on OSC inks can be very challenging due to the low viscosity of their solutions, which causes dewetting problems, the low stability of OSC polymer solutions, or the difficulty in achieving appropriate crystal order. To circumvent this, a promising route is the use of blends of OSCs and insulating binding polymers. This approach typically gives rise to films with an enhanced crystallinity and organic field-effect transistors (OFETs) with significantly improved device performance. Recent progress in the fabrication of OFETs based on OSC/binding polymer inks is reviewed, highlighting the main morphological and structural features that play a major role in determining the final electrical properties and some future perspectives. Undoubtedly, the use of these types of blends results in more reliable and reproducible devices that can be fabricated on large areas and at low cost and, thus, this methodology brings great expectations for the implementation of OSCs in real-world applications.
|
|
| 5. |
- Rodriguez Martinez, Xabier, et al.
(författare)
-
Matching electron transport layers with a non-halogenated and low synthetic complexity polymer:fullerene blend for efficient outdoor and indoor organic photovoltaics
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 10:19, s. 10768-10779
-
Tidskriftsartikel (refereegranskat)abstract
- The desired attributes of organic photovoltaics (OPV) as a low cost and sustainable energy harvesting technology demand the use of non-halogenated solvent processing for the photoactive layer (PAL) materials, preferably of low synthetic complexity (SC) and without compromising the power conversion efficiency (PCE). Despite their record PCEs, most donor-acceptor conjugated copolymers in combination with non-fullerene acceptors are still far from upscaling due to their high cost and SC. Here we present a non-halogenated and low SC ink formulation for the PAL of organic solar cells, comprising PTQ10 and PC61BM as donor and acceptor materials, respectively, showing a record PCE of 7.5% in blade coated devices under 1 sun, and 19.9% under indoor LED conditions. We further study the compatibility of the PAL with 5 different electron transport layers (ETLs) in inverted architecture. We identify that commercial ZnO-based formulations together with a methanol-based polyethyleneimine-Zn (PEI-Zn) chelated ETL ink are the most suitable interlayers for outdoor conditions, providing fill factors as high as 74% and excellent thickness tolerance (up to 150 nm for the ETL, and >200 nm for the PAL). In indoor environments, SnO2 shows superior performance as it does not require UV photoactivation. Semi-transparent devices manufactured entirely in air via lamination show indoor PCEs exceeding 10% while retaining more than 80% of the initial performance after 400 and 350 hours of thermal and light stress, respectively. As a result, PTQ10:PC61BM combined with either PEI-Zn or SnO2 is currently positioned as a promising system for industrialisation of low cost, multipurpose OPV modules.
|
|
| 6. |
- Wang, Suhao, et al.
(författare)
-
Sequential Doping of Ladder-Type Conjugated Polymers for Thermally Stable n-Type Organic Conductors
- 2020
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 12:47, s. 53003-53011
-
Tidskriftsartikel (refereegranskat)abstract
- Doping of organic semiconductors is a powerful tool to optimize the performance of various organic (opto)electronic and bioelectronic devices. Despite recent advances, the low thermal stability of the electronic properties of doped polymers still represents a significant obstacle to implementing these materials into practical applications. Hence, the development of conducting doped polymers with excellent long-term stability at elevated temperatures is highly desirable. Here, we report on the sequential doping of the ladder-type polymer poly(benzimidazobenzophenanthroline) (BBL) with a benzimidazole-based dopant (i.e., N-DMBI). By combining electrical, UV-vis/infrared, X-ray diffraction, and electron paramagnetic resonance measurements, we quantitatively characterized the conductivity, Seebeck coefficient, spin density, and microstructure of the sequentially doped polymer films as a function of the thermal annealing temperature. Importantly, we observed that the electrical conductivity of N-DMBI-doped BBL remains unchanged even after 20 h of heating at 190 °C. This finding is remarkable and of particular interest for organic thermoelectrics.
|
|
