| 1. |
- Andersson, Lena, 1965-, et al.
(författare)
-
Respiratory Health and Inflammatory Markers : Exposure to Cobalt in the Swedish Hard Metal Industry
- 2020
-
Ingår i: Journal of Occupational and Environmental Medicine. - : Lippincott Williams & Wilkins. - 1076-2752 .- 1536-5948. ; 62:10, s. 820-829
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVE: To study the relationship between inhalable dust and cobalt and respiratory symptoms, lung function, exhaled nitric oxide in expired air and CC16 in the Swedish hard metal industry.METHODS: Personal sampling of inhalable dust and cobalt, medical examination including blood sampling was performed for 72 workers. Exposure-response relationships was determined using logistic, linear and mixed model analysis.RESULTS: The average inhalable dust and cobalt concentrations were 0.079 and 0.0017 mg/m, respectively. Statistically significant increased serum levels of CC16 were determined when the high and low cumulative exposures for cobalt were compared. Non-significant exposure-response relationships was observed between cross-shift inhalable dust or cobalt exposures and asthma, nose dripping and bronchitis.CONCLUSIONS: Our findings suggest an exposure-response relationship between inhalable cumulative cobalt exposure and CC16 levels in blood, which may reflect an injury or a reparation process in the lungs.
|
|
| 2. |
- Lerm, Maria, 1973-, et al.
(författare)
-
Leishmania donovani requires functional Cdc42 and Rac1 to prevent phagosomal maturation
- 2006
-
Ingår i: Infection and Immunity. - 0019-9567 .- 1098-5522. ; 74:5, s. 2613-2618
-
Tidskriftsartikel (refereegranskat)abstract
- Leishmania donovani promastigotes survive inside macrophage phagosomes by inhibiting phagosomal maturation. The main surface glycoconjugate on promastigotes, lipophosphoglycan (LPG), is crucial for survival and mediates the formation of a protective shell of F-actin around the phagosome. Previous studies have demonstrated that this effect involves inhibition of protein kinase Cα. The present study shows that functional Cdc42 and Rac1 are required for the formation of F-actin around L. donovani phagosomes. Moreover, we present data showing that phagosomes containing LPG-defective L. donovani, which is unable to induce F-actin accumulation, display both elevated levels of periphagosomal F-actin and impaired phagosomal maturation in macrophages with permanently active forms of Cdc42 and Rac1. We conclude that L. donovani engages Cdc42 and Rac1 to build up a protective coat of F-actin around its phagosome to prevent phagosomal maturation. Copyright © 2006, American Society for Microbiology. All Rights Reserved.
|
|
| 3. |
- Westberg, Håkan, 1949-, et al.
(författare)
-
Inflammatory and coagulatory markers and exposure to different size fractions of particle mass, number and surface area air concentrations in Swedish iron foundries, in particular respirable quartz
- 2019
-
Ingår i: International Archives of Occupational and Environmental Health. - : Springer Berlin/Heidelberg. - 0340-0131 .- 1432-1246. ; 92:8, s. 1087-1098
-
Tidskriftsartikel (refereegranskat)abstract
- PURPOSE: To study the relationship between inhalation of airborne particles and quartz in Swedish iron foundries and markers of inflammation and coagulation in blood.METHODS: Personal sampling of respirable dust and quartz was performed for 85 subjects in three Swedish iron foundries. Stationary measurements were used to study the concentrations of respirable dust and quartz, inhalable and total dust, PM10 and PM2.5, as well as the particle surface area and the particle number concentrations. Markers of inflammation, namely interleukins (IL-1β, IL-6, IL-8, IL-10 and IL-12), C-reactive protein, and serum amyloid A (SAA) were measured in plasma or serum, together with markers of coagulation including fibrinogen, factor VIII (FVIII), von Willebrand factor and D-dimer. Complete sampling was performed on the second or third day of a working week after a work-free weekend, and follow-up samples were collected 2 days later. A mixed model analysis was performed including sex, age, smoking, infections, blood group, sampling day and BMI as covariates.RESULTS: The average 8-h time-weighted average air concentrations of respirable dust and quartz were 0.85 mg/m3 and 0.052 mg/m3, respectively. Participants in high-exposure groups with respect to some of the measured particle types exhibited significantly elevated levels of SAA, fibrinogen and FVIII.CONCLUSIONS: These observed relationships between particle exposure and inflammatory markers may indicate an increased risk of cardiovascular disease among foundry workers with high particulate exposure.
|
|
| 4. |
- Ydrenius, Liselotte, et al.
(författare)
-
Activation of cAMP-dependent protein kinase is necessary for actin rearrangements in human neutrophils during phagocytosis
- 2000
-
Ingår i: Journal of Leukocyte Biology. - 0741-5400 .- 1938-3673. ; 67:4, s. 520-528
-
Tidskriftsartikel (refereegranskat)abstract
- We have investigated the role of cAMP and cAMP-dependent protein kinase (cAPK) in neutrophil phagocytosis. Inhibition of cAPK with H-89 reduced complement- and IgG-dependent phagocytosis to 83 and 46%, respectively. Fluorescence intensity measurements of phalloidin-stained actin in neutrophils showed a reduced amount of filamentous actin (F-actin) in pseudopods and around the phagosome in cells treated with H-89 or cAMP-elevating agents (forskolin and rolipram). The amount of phosphotyrosine-containing proteins was also reduced in pseudopods and around the phagosome. Taken together, the data show that cAMP/cAPK regulates F-actin reorganization during receptor-mediated phagocytosis, particularly triggered by IgG-FcR interaction. Our results support the hypothesis that active subcortical reorganization of F-actin is a prerequisite for FcR-mediated phagocytosis, but is less important during CR3-mediated ingestion.
|
|
| 5. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
A Novel Nanosafety Approach Using Cell Painting, Metabolomics, and Lipidomics Captures the Cellular and Molecular Phenotypes Induced by the Unintentionally Formed Metal-Based (Nano)Particles
- 2023
-
Ingår i: Cells. - : MDPI. - 2073-4409. ; 12:2
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing (AM) or industrial 3D printing uses cutting-edge technologies and materials to produce a variety of complex products. However, the effects of the unintentionally emitted AM (nano)particles (AMPs) on human cells following inhalation, require further investigations. The physicochemical characterization of the AMPs, extracted from the filter of a Laser Powder Bed Fusion (L-PBF) 3D printer of iron-based materials, disclosed their complexity, in terms of size, shape, and chemistry. Cell Painting, a high-content screening (HCS) assay, was used to detect the subtle morphological changes elicited by the AMPs at the single cell resolution. The profiling of the cell morphological phenotypes, disclosed prominent concentration-dependent effects on the cytoskeleton, mitochondria, and the membranous structures of the cell. Furthermore, lipidomics confirmed that the AMPs induced the extensive membrane remodeling in the lung epithelial and macrophage co-culture cell model. To further elucidate the biological mechanisms of action, the targeted metabolomics unveiled several inflammation-related metabolites regulating the cell response to the AMP exposure. Overall, the AMP exposure led to the internalization, oxidative stress, cytoskeleton disruption, mitochondrial activation, membrane remodeling, and metabolic reprogramming of the lung epithelial cells and macrophages. We propose the approach of integrating Cell Painting with metabolomics and lipidomics, as an advanced nanosafety methodology, increasing the ability to capture the cellular and molecular phenotypes and the relevant biological mechanisms to the (nano)particle exposure.
|
|
| 6. |
|
|
| 7. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
Characteristics and health risks of the inhalable fraction of metal additive manufacturing powders
- 2024
-
Ingår i: Nano Select. - : Wiley-VCH Verlagsgesellschaft. - 2688-4011. ; 5:4
-
Tidskriftsartikel (refereegranskat)abstract
- Metal additive manufacturing (AM) is gaining traction but raises worker health concerns due to micron-sized powders, including fine inhalable particles. This study explored particle and surface characteristics, electrochemical properties, metal release in artificial lysosomal fluid (ALF), and potential toxicity of virgin and sieved virgin Fe-based powders, stainless steel (316L), Fe, and two tooling steels. Virgin particles ranged in size from 1 to 100μm, while sieved particles were within the respirable size range (<5–10μm). Surface oxide composition differed from bulk composition. The Fe powder showed low corrosion resistance and high metal release due to a lack of protective surface oxide. Sieved particles of 316L, Fe, and one tooling steel released more metals into ALF than virgin particles, with the opposite was observed for the other tooling steel. Sieved particles had no notable impact on cell viability or micronuclei formation in human bronchial epithelial cells. Inflammatory response in human macrophages was generally low, except for the Fe powder and one tooling steel, which induced increased interleukin-8 (IL-8/CXCL-8) and monocyte chemoattractant protein-1 (MCP-1/CCL-2) secretion. This study underscores distinctions between virgin and sieved Fe-based powders and suggests relatively low acute toxicity.
|
|
| 8. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
Immunotoxic, genotoxic, and endocrine disrupting impacts of polyamide microplastic particles and chemicals
- 2024
-
Ingår i: Environment International. - : Elsevier. - 0160-4120 .- 1873-6750. ; 183
-
Tidskriftsartikel (refereegranskat)abstract
- Due to their exceptional properties and cost effectiveness, polyamides or nylons have emerged as widely used materials, revolutionizing diverse industries, including industrial 3D printing or additive manufacturing (AM). Powder-based AM technologies employ tonnes of polyamide microplastics to produce complex components every year. However, the lack of comprehensive toxicity assessment of particulate polyamides and polyamide-associated chemicals, especially in the light of the global microplastics crisis, calls for urgent action. This study investigated the physicochemical properties of polyamide-12 microplastics used in AM, and assessed a number of toxicity endpoints focusing on inflammation, immunometabolism, genotoxicity, aryl hydrocarbon receptor (AhR) activation, endocrine disruption, and cell morphology. Specifically, microplastics examination by means of field emission scanning electron microscopy revealed that work flow reuse of material created a fraction of smaller particles with an average size of 1-5 µm, a size range readily available for uptake by human cells. Moreover, chemical analysis by means of gas chromatography high-resolution mass spectrometry detected several polyamide-associated chemicals including starting material, plasticizer, thermal stabilizer/antioxidant, and migrating slip additive. Even if polyamide particles and chemicals did not induce an acute inflammatory response, repeated and prolonged exposure of human primary macrophages disclosed a steady increase in the levels of proinflammatory chemokine Interleukin-8 (IL-8/CXCL-8). Moreover, targeted metabolomics disclosed that polyamide particles modulated the kynurenine pathway and some of its key metabolites. The p53-responsive luciferase reporter gene assay showed that particles per se were able to activate p53, being indicative of a genotoxic stress. Polyamide-associated chemicals triggered moderate activation of AhR and elicited anti-androgenic activity. Finally, a high-throughput and non-targeted morphological profiling by Cell Painting assay outlined major sites of bioactivity of polyamide-associated chemicals and indicated putative mechanisms of toxicity in the cells. These findings reveal that the increasing use of polyamide microplastics may pose a potential health risk for the exposed individuals, and it merits more attention.
|
|
| 9. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
NLRP3 inflammasome as a sensor of micro- and nanoplastics immunotoxicity
- 2023
-
Ingår i: Frontiers in Immunology. - : Frontiers Media S.A.. - 1664-3224. ; 14
-
Forskningsöversikt (refereegranskat)abstract
- Micro- and nanoplastics (MNPs) are emerging pollutants with scarcely investigated effects on human innate immunity. If they follow a similar course of action as other, more thoroughly investigated particulates, MNPs may penetrate epithelial barriers, potentially triggering a cascade of signaling events leading to cell damage and inflammation. Inflammasomes are intracellular multiprotein complexes and stimulus-induced sensors critical for mounting inflammatory responses upon recognition of pathogen- or damage-associated molecular patterns. Among these, the NLRP3 inflammasome is the most studied in terms of activation via particulates. However, studies delineating the ability of MNPs to affect NLRP3 inflammasome activation are still rare. In this review, we address the issue of MNPs source and fate, highlight the main concepts of inflammasome activation via particulates, and explore recent advances in using inflammasome activation for assessment of MNP immunotoxicity. We also discuss the impact of co-exposure and MNP complex chemistry in potential inflammasome activation. Development of robust biological sensors is crucial in order to maximize global efforts to effectively address and mitigate risks that MNPs pose for human health.
|
|
| 10. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
Particle Safety Assessment in Additive Manufacturing : From Exposure Risks to Advanced Toxicology Testing.
- 2022
-
Ingår i: Frontiers in Toxicology. - : Frontiers Media S.A.. - 2673-3080. ; 4
-
Forskningsöversikt (refereegranskat)abstract
- Additive manufacturing (AM) or industrial three-dimensional (3D) printing drives a new spectrum of design and production possibilities; pushing the boundaries both in the application by production of sophisticated products as well as the development of next-generation materials. AM technologies apply a diversity of feedstocks, including plastic, metallic, and ceramic particle powders with distinct size, shape, and surface chemistry. In addition, powders are often reused, which may change the particles' physicochemical properties and by that alter their toxic potential. The AM production technology commonly relies on a laser or electron beam to selectively melt or sinter particle powders. Large energy input on feedstock powders generates several byproducts, including varying amounts of virgin microparticles, nanoparticles, spatter, and volatile chemicals that are emitted in the working environment; throughout the production and processing phases. The micro and nanoscale size may enable particles to interact with and to cross biological barriers, which could, in turn, give rise to unexpected adverse outcomes, including inflammation, oxidative stress, activation of signaling pathways, genotoxicity, and carcinogenicity. Another important aspect of AM-associated risks is emission/leakage of mono- and oligomers due to polymer breakdown and high temperature transformation of chemicals from polymeric particles, both during production, use, and in vivo, including in target cells. These chemicals are potential inducers of direct toxicity, genotoxicity, and endocrine disruption. Nevertheless, understanding whether AM particle powders and their byproducts may exert adverse effects in humans is largely lacking and urges comprehensive safety assessment across the entire AM lifecycle-spanning from virgin and reused to airborne particles. Therefore, this review will detail: 1) brief overview of the AM feedstock powders, impact of reuse on particle physicochemical properties, main exposure pathways and protective measures in AM industry, 2) role of particle biological identity and key toxicological endpoints in the particle safety assessment, and 3) next-generation toxicology approaches in nanosafety for safety assessment in AM. Altogether, the proposed testing approach will enable a deeper understanding of existing and emerging particle and chemical safety challenges and provide a strategy for the development of cutting-edge methodologies for hazard identification and risk assessment in the AM industry.
|
|
