| 1. |
|
|
| 2. |
- Jentschel, M., et al.
(författare)
-
EXILL - a high-efficiency, high-resolution setup for gamma-spectroscopy at an intense cold neutron beam facility
- 2017
-
Ingår i: Journal of Instrumentation. - : IOP PUBLISHING LTD. - 1748-0221 .- 1748-0221. ; 12
-
Tidskriftsartikel (refereegranskat)abstract
- In the EXILL campaign a highly efficient array of high purity germanium (HPGe) detectors was operated at the cold neutron beam facility PF1B of the Institut Laue-Langevin (ILL) to carry out nuclear structure studies, via measurements of gamma-rays following neutron-induced capture and fission reactions. The setup consisted of a collimation system producing a pencil beam with a thermal capture equivalent flux of about 10(8) ns(-1)cm(2) at the target position and negligible neutron halo. The targetwas surrounded by an array of eight to ten anti-Compton shielded EXOGAMClover detectors, four to six anti-Compton shielded large coaxial GASP detectors and two standard Clover detectors. For a part of the campaign the array was combined with 16 LaBr3:(Ce) detectors from the FATIMA collaboration. The detectorswere arranged in an array of rhombicuboctahedron geometry, providing the possibility to carry out very precise angular correlation and directional-polarization correlation measurements. The triggerless acquisition system allowed a signal collection rate of up to 6 x 10(5) Hz. The data allowed to set multi-fold coincidences to obtain decay schemes and in combination with the FATIMA array of LaBr3:(Ce) detectors to analyze half-lives of excited levels in the pico-to microsecond range. Precise energy and efficiency calibrations of EXILL were performed using standard calibration sources of Ba-133, Co-60 and Eu-152 as well as data from the reactions Al-27(n, gamma)Al-28 and Cl-35(n,gamma)Cl-36 in the energy range from 30 keV up to 10MeV.
|
|
| 3. |
- Vogt, A., et al.
(författare)
-
Isomers and high-spin structures in the N=81 isotones Xe-135 and Ba-137
- 2017
-
Ingår i: PHYSICAL REVIEW C. - : AMER PHYSICAL SOC. - 2469-9985. ; 95:2
-
Tidskriftsartikel (refereegranskat)abstract
- The high-spin structures and isomers of the N = 81 isotones Xe-135 and Ba-137 are investigated after multinucleon-transfer (MNT) and fusion-evaporation reactions. Both nuclei are populated (i) in Xe-136+ U-238 and (ii) Xe-136+ Pb-208 MNT reactions employing the high-resolution Advanced Gamma Tracking Array (AGATA) coupled to the magnetic spectrometer PRISMA, (iii) in the Xe-136+ Pt-198 MNT reaction employing the gamma-ray array GAMMASPHERE in combination with the gas-detector array CHICO, and (iv) via a B-11+ Te-130 fusion-evaporation reaction with the HORUS gamma-ray array at the University of Cologne. The high-spin level schemes of Xe-135 and Ba-137 are considerably extended to higher energies. The 2058-keV (19/2(-)) state in Xe-135 is identified as an isomer, closing a gap in the systematics along the N = 81 isotones. Its half-life is measured to be 9.0(9) ns, corresponding to a reduced transition probability of B(E2,19/2(-) -> 15/2(-)) = 0.52(6) W.u. The experimentally deduced reduced transition probabilities of the isomeric states are compared to shell-model predictions. Latest shell-model calculations reproduce the experimental findings generally well and provide guidance to the interpretation of the new levels.
|
|
| 4. |
|
|
| 5. |
- Bromley, Elizabeth H. C., et al.
(författare)
-
The Tumbleweed: towards a synthetic protein motor
- 2009
-
Ingår i: HFSP Journal. - : Informa UK Limited. - 1955-2068. ; 3:3, s. 204-212
-
Tidskriftsartikel (refereegranskat)abstract
- Biomolecular motors have inspired the design and construction of artificial nanoscale motors and machines based on nucleic acids, small molecules, and inorganic nanostructures. However, the high degree of sophistication and efficiency of biomolecular motors, as well as their specific biological function, derives from the complexity afforded by protein building blocks. Here, we discuss a novel bottom-up approach to understanding biological motors by considering the construction of synthetic protein motors. Specifically, we present a design for a synthetic protein motor that moves along a linear track, dubbed the "Tumbleweed." This concept uses three discrete ligand-dependent DNA-binding domains to perform cyclically ligand-gated, rectified diffusion along a synthesized DNA molecule. Here we describe how de novo peptide design and molecular biology could be used to produce the Tumbleweed, and we explore the fundamental motor operation of such a design using numerical simulations. The construction of this and more sophisticated protein motors is an exciting challenge that is likely to enhance our understanding of the structure-function relationship in biological motors. [DOI: 10.2976/1.3111282]
|
|
| 6. |
- Jamaly, Nima, 1979, et al.
(författare)
-
A Revisit to Spatial Correlation in Terms of Input Network Parameters
- 2012
-
Ingår i: IEEE Antennas and Wireless Propagation Letters. - 1548-5757 .- 1536-1225. ; 11, s. 1342-1345
-
Tidskriftsartikel (refereegranskat)abstract
- An alternative compact formula in terms of input network parameters for calculation of envelope correlations is provided. The main advantage of this formula is that it can be simply modified to include cases of lossy structures and general cases of correlated nonuniform multipath environments. This formula is based on the open-circuit covariance matrix of the multiport antennas. The latter can be either estimated or quickly measured in a reverberation chamber, which removes the need for costly measurements of the embedded far field patterns.
|
|
| 7. |
- Kovacic, Suzana, et al.
(författare)
-
Design and Construction of a One- Dimensional DNA Track for an Artificial Molecular Motor
- 2012
-
Ingår i: Journal of Nanomaterials. - : Hindawi Limited. - 1687-4129 .- 1687-4110.
-
Tidskriftsartikel (refereegranskat)abstract
- DNA is a versatile heteropolymer that shows great potential as a building block for a diverse array of nanostructures. We present here a solution to the problem of designing and synthesizing a DNA-based nanostructure that will serve as the track along which an artificial molecular motor processes. This one-dimensional DNA track exhibits periodically repeating elements that provide specific binding sites for the molecular motor. Besides these binding elements, additional sequences are necessary to label specific regions within the DNA track and to facilitate track construction. Designing an ideal DNA track sequence presents a particular challenge because of the many variable elements that greatly expand the number of potential sequences from which the ideal sequence must be chosen. In order to find a suitable DNA sequence, we have adapted a genetic algorithm which is well suited for a large but sparse search space. This algorithm readily identifies long DNA sequences that include all the necessary elements to both facilitate DNA track construction and to present appropriate binding sites for the molecular motor. We have successfully experimentally incorporated the sequence identified by the algorithm into a long DNA track meeting the criteria for observation of the molecular motor's activity.
|
|
| 8. |
|
|
| 9. |
- Samii, Laleh, et al.
(författare)
-
Time-dependent motor properties of multipedal molecular spiders
- 2011
-
Ingår i: Physical Review E (Statistical, Nonlinear, and Soft Matter Physics). - 1539-3755. ; 84:3
-
Tidskriftsartikel (refereegranskat)abstract
- Molecular spiders are synthetic biomolecular walkers that use the asymmetry resulting from cleavage of their tracks to bias the direction of their stepping motion. Using Monte Carlo simulations that implement the Gillespie algorithm, we investigate the dependence of the biased motion of molecular spiders, along with binding time and processivity, on tunable experimental parameters, such as number of legs, span between the legs, and unbinding rate of a leg from a substrate site. We find that an increase in the number of legs increases the spiders' processivity and binding time but not their mean velocity. However, we can increase the mean velocity of spiders with simultaneous tuning of the span and the unbinding rate of a spider leg from a substrate site. To study the efficiency of molecular spiders, we introduce a time-dependent expression for the thermodynamic efficiency of a molecular motor, allowing us to account for the behavior of spider populations as a function of time. Based on this definition, we find that spiders exhibit transient motor function over time scales of many hours and have a maximum efficiency on the order of 1%, weak compared to other types of molecular motors.
|
|
| 10. |
|
|
