| 1. |
|
|
| 2. |
|
|
| 3. |
- Johansson, Erik M .J., et al.
(författare)
-
Interfacial properties of photovoltaic TiO2/dye/PEDOT-PSS heterojunctions
- 2005
-
Ingår i: Synthetic metals. - : Elsevier BV. - 0379-6779 .- 1879-3290. ; 149:03-feb, s. 157-167
-
Tidskriftsartikel (refereegranskat)abstract
- Systems comprising a dense TiO2 film electrode, a ruthenium polypyridine dye and a PEDOT-PSS (poly(3,4-ethylenedioxythiophene)-poly(4-styrenesulphonate)) film were prepared. The heterojunctions were shown to have photovoltaic properties, with the dye absorbing the light, the TiO2 acting as an electron conducting material and PEDOT-PSS acting as a hole transport material. A series of dyes was used to investigate their influence on the photocurrent and the photovoltage characteristics of the heterojunction. These results were compared to a photoelectrochemical system in which the PEDOT-PSS was replaced by a liquid electrolyte containing triiodide/iodide redox-couple. Photoelectron spectroscopy (PES) was used to monitor the interfacial properties of the heterojunction and the investigation points out effects of importance when assembling the materials together to a functional unit. Specifically, it was concluded that the interaction with the dye clearly affects the structure of PEDOT-PSS, both with respect to the surface composition of PSS relative to PEDOT and with respect to the chemical state of the sulphur in the polymers. Moreover, a comparison of the Ru3d and the valence band spectra of the two different interfaces (dye/TiO2 and dye/PEDOT-PSS) indicates that the energy level structure of the dyes compared to the substrate is different for the two surfaces. Thus, in the combined energy level picture under dark conditions, the energy levels in TiO2 relative to the energy levels in PEDOT-PSS depend on the dye.
|
|
| 4. |
- Richter, Jan Hinnerk, et al.
(författare)
-
Phase separation and charge localization in UHV-lithiated anatase TiO2 nanoparticles
- 2005
-
Ingår i: Physical Review B. - 1098-0121. ; 71:23, s. 235419-
-
Tidskriftsartikel (refereegranskat)abstract
- The insertion of lithium in anatase TiO2 nanoparticles under ultrahigh vacuum (UHV) conditions is studied using x-ray absorption spectroscopy (XAS) and resonant photoelectron spectroscopy (RPES) at the Ti L2,3 edge. It is demonstrated that XAS can be used to monitor the separation into an anatase phase and a lithium titanate phase of formal stoichiometry Li0.5TiO2. The initial state properties of the Ti 3d states of the lithium titanate phase are investigated using ab initio electronic structure calculations. The calculations show a correlation driven separation of Ti 3d states from the conduction band in agreement with previous studies. It is shown that Ti in different oxidation states (Ti3+ and Ti4+) is formed as a direct consequence of the electron-electron interaction. RPES and XAS spectra confirm the presence of electronically inequivalent Ti sites. The site-sensitivity of the RPES spectra at selected electron binding energies is found to be consistent with the calculations.
|
|
| 5. |
- Siikanen, Jonathan, et al.
(författare)
-
An anesthetic method compatible with (18)F-FDG-PET studies in mice.
- 2015
-
Ingår i: American journal of nuclear medicine and molecular imaging. - 2160-8407. ; 5:3, s. 270-277
-
Tidskriftsartikel (refereegranskat)abstract
- The purpose of this study was to establish an experimental setting and an anesthetic method compatible with future sequential studies using (18)F-FDG-PET single scans, i.e. autoradiographic measurements, for the estimation of metabolic rate of glucose (MRglc) in mice. In this study we had no access to a small animal PET scanner and therefore focus was on the anesthetic setting and optimization of the input function as a preparation for the future tumor metabolic studies. Initially, four combinations of intraperitoneal (ip) anesthesia were tested on tumor bearing mice. Fentanyl-fluanisone plus diazepam yielded low and stable blood glucose levels and kept the animals sedated for approximately 2 h. The anesthesia was also tested in a longitudinal (18)F-FDG study, where tumor bearing mice were anesthetized, injected with (18)F-FDG, and sampled for blood, before, one day after, and 8 days after treatment with cisplatin. The animals were in good condition during the entire study period. To validate the method, average MRglc of whole brain and cerebellum in mice were calculated and compared with the literature. The average MRglc in the whole brain and cerebellum were 46.2±4.4 and 39.0±3.1 µmol 100g(-1) min(-1). In the present study, we have shown that an ip anesthesia with a combination of fentanyl-fluanisone and diazepam is feasible and provides stable and low blood glucose levels after a fasting period of 4 h in experiments in nude mice with xenografted human tumors. We have also verified that (18)F-FDG, intraperitoneally administrated, results in an expected plasma activity uptake and clearance. The method doesn't alter the uptake in brain which is an indirect indication that the anesthesia doesn't alter the uptake in other organs. In combination with meticulous animal handling this set-up is reliable and future sequential tumor studies of early metabolic effects with calculation of MRglc following cytotoxic therapy are made possible.
|
|
| 6. |
- Adler, Jan-Olof, et al.
(författare)
-
A broad range tagging spectrometer for the MAX-laboratory
- 1997
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - 0167-5087. ; 388:1-2, s. 17-26
-
Tidskriftsartikel (refereegranskat)abstract
- A broad range tagging spectrometer together with a new beam transport system for photonuclear experiments at the MAX-laboratory in Lund is described. The spectrometer consists of a quadrupole followed by an Elbek-type dipole and has a large momentum acceptance. It can produce both polarized and unpolarized tagged photons in the energy range 10–80 MeV with an energy resolution of about 300 keV.
|
|
| 7. |
- Adler, Jan-Olof, et al.
(författare)
-
The upgraded photon tagging facility at the MAX IV Laboratory
- 2013
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002. ; 715, s. 1-10
-
Tidskriftsartikel (refereegranskat)abstract
- A description is given of the upgraded photon tagging facility at the MAX IV Laboratory. Two magnetic spectrometers are used to momentum analyze post-bremsstrahlung electrons. The tagged photon range extends from 10 to 180 MeV with an energy resolution of about 300 keV. The system has been operated at rates up to 4 x 10(6) photons s(-1) MeV (-1). Different diagnostic tools are described as well as the experimental program.
|
|
| 8. |
- Agnarsson, Björn, 1977-
(författare)
-
Surface studies on α–sapphire for potential use in GaN epitaxial growth
- 2009
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This Licentiate thesis summarizes the work carried out by the author the years 2004 to 2008 at the University of Iceland and the Royal Institute of Technology (KTH) in Sweden. The aim of the project was to investigate the structure of sapphire (alpha-Al2O3) surfaces, both for pure scientific reasons and also for potential use as substrate for GaN-growth by molecular beam epitaxy. More generally the thesis describes some surface science methods used for investigating the substrates; the general physical back ground, the experi- mental implementation and what information they can give. The described techniques are used for surface analysis on sapphire substrates which have been treated variously in order to optimize them for use as templates for epi- taxial growth of GaN or related III-V compounds. The thesis is based on three published papers. The first paper focuses on the formation a thin AlN layer on sapphire, which may act as a buffer layer for potential epitaxial growth of GaN or any related III-V materials. Two types of sapphire substrates (reconstructed and non- reconstructed) were exposed to ammonia resulting in the formation of AlN on the surface. The efficiency of the AlN formation (nitridation efficiency) for the two surfaces was then compared as a function of substrate temperature through photoelectron spectroscopy and low electron energy diffraction. The reconstructed surface showed a much higher nitridation efficiency than the non-reconstructed surface. In the second paper, the affect of different annealing processes on the sapphire morphology, and thus its capability to act as a template for GaN growth, was studied. Atomic force microscopy, X-ray diffraction analysis together with ellipsometry measurements showed that annealing in H2 ambient and subse- quent annealing at 1300 °C in O2 for 11 hours resulted in high quality and atomically flat sapphire surface suitable for III-V epitaxial growth. The third paper describes the effect of argon sputtering on cleaning GaN surfaces and the possibility of using indium as surfactant for establishing a clean and stoichiometric GaN surface, after such sputtering. Soft sputtering, followed by deposition of 2 ML of indium and subsequent annealing at around 500 °C resulted in a well ordered and clean GaN surface while hard sputtering introduced defects and incorporated both metallic gallium and indium in the surface.
|
|
| 9. |
- Akkurt, I, et al.
(författare)
-
Photoneutron yields from tungsten in the energy range of the giant dipole resonance
- 2003
-
Ingår i: Physics in Medicine and Biology. - : IOP Publishing. - 1361-6560 .- 0031-9155. ; 48:20, s. 3345-3352
-
Tidskriftsartikel (refereegranskat)abstract
- Photoneutron production on the nuclei of high-Z components of medical accelerator heads can lead to a significant secondary dose during a course of bremsstrahlung radiotherapy, However, a quantitative evaluation of secondary neutron dose requires improved data on the photoreaction yields. These have been measured as a function of photon energy, neutron energy and neutron angle for W-nat, using tagged photons at the MAX-Lab photonuclear facility in Sweden. This work presents neutron yields for W-nat(gamma, n) and compares these with the predictions of the Monte Carlo code MCNP-GN, developed specifically to simulate photoneutron production at medical accelerators.
|
|
| 10. |
- Alfredsson, Ylvi, 1973-
(författare)
-
Electronic and Structural Properties of Thin Films of Phthalocyanines and Titanium Dioxide
- 2005
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This thesis is based on experimental studies in chemical physics. Titanium dioxide (TiO2) and phthalocyanine’s (Pc’s), interesting in many future perspectives, have been deposited as thin films and studied as follows. Information has been obtained on e.g. molecular orientation, crystal structure, depth profile of the chemical composition, electrochemical properties and electronic structure. This has been achieved by means of a combination of techniques: X-ray photoelectron spectroscopy (XPS), near edge x-ray absorption fine structure (NEXAFS), density functional theory calculations (DFT), UV-visible absorption spectroscopy (UVVIS) and cyclic voltammetry (CV).Metal-free phthalcyanine (H2Pc) has been shown to form films with different crystal structure and molecular orientation depending on deposition method, evaporation/sublimation or powder deposition, on commercial conducting glass (fluorine doped tin oxide, FTO), which is used e.g. in solar cells and organic light emitting devices (OLEDs). The unoccupied molecular orbitals are divided in x, y and z space coordinates of the molecule and also divided in inequivalent nitrogen components.The electronic structure is also studied for a sublimated titanyl phthalocyanine (TiOPc) film and related to the metal-free phthalocyanine. The ligand field around the titanium atom in TiOPc is compared with that of TiO2 to delineate the unoccupied levels recorded by means of x-ray absorption spectroscopy.Nanostructured TiO2 films were manufactured by screen printing/doctor blading on FTO. Such films were additionally covered with lutetium diphthalocyanine (LuPc2) by means of surface assembly from solution. LuPc2-, LuPc2+ and LuPc2H were identified and the stability of the electrochromic reactions in this system was monitored.Chemical vapor deposition (CVD) has been used to grow nanometer sized anatase TiO2 crystals on pre-oxidized Si (111) without formation of interfacial carbon and with an interface layer of the size of 15- 25Å. The interface layer was found to be amorphous TiSixOy with graded stoichiometry.
|
|
