| 1. |
- Kaur-Kahlon, G., et al.
(författare)
-
Response of a coastal tropical pelagic microbial community to changed salinity and temperature
- 2016
-
Ingår i: Aquatic Microbial Ecology. - 0948-3055 .- 1616-1564. ; 77:1, s. 37-50
-
Tidskriftsartikel (refereegranskat)abstract
- Studies on the responses of tropical microbial communities to changing hydrographic conditions are presently poorly represented. We present here the results from a mesocosm experiment conducted in southwest (SW) coastal India to investigate how changes in temperature and salinity may affect a coastal tropic microbial community. The onset of algal and bacterial blooms, the maximum production and biomass, and the interrelation between phytoplankton and bacteria were studied in replicated mesocosms. The treatments were set up featuring ambient conditions (28 °C, 35 PSU), hyposalinity (31 PSU), warming (31 °C) and a double manipulated treatment with warming and hyposalinity (31 °C, 31 PSU). The hyposaline treatment had the most considerable influence manifested as significantly lower primary production, and the most dissimilar microphytoplankton species community. The increased temperature acted as a catalyst in the double manipulated treatment and higher primary production was maintained. We investigated the dynamics of the microbial community with a structural equation model approach, and found a significant interrelation between phytoplankton biomass and bacterial abundance. Using this methodology, it became evident that temperature and salinity changes, individually and together, mediate direct and indirect effects that influence different compartments of the microbial loop. In the face of climate change, we suggest that in relatively nutrient replete tropical coastal zones, salinity and temperature changes will affect nutrient assimilation with subsequent significant effects on the quantity of microbial biomass and production.
|
|
| 2. |
- Abercrombie, Daniel, et al.
(författare)
-
Dark Matter benchmark models for early LHC Run-2 Searches : Report of the ATLAS/CMS Dark Matter Forum
- 2020
-
Ingår i: Physics of the Dark Universe. - : Elsevier BV. - 2212-6864. ; 27
-
Tidskriftsartikel (refereegranskat)abstract
- This document is the final report of the ATLAS-CMS Dark Matter Forum, a forum organized by the ATLAS and CMS collaborations with the participation of experts on theories of Dark Matter, to select a minimal basis set of dark matter simplified models that should support the design of the early LHC Run-2 searches. A prioritized, compact set of benchmark models is proposed, accompanied by studies of the parameter space of these models and a repository of generator implementations. This report also addresses how to apply the Effective Field Theory formalism for collider searches and present the results of such interpretations.
|
|
| 3. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 4. |
- Bothmann, Enrico, et al.
(författare)
-
A standard convention for particle-level Monte Carlo event-variation weights
- 2023
-
Ingår i: SciPost Physics Core. - 2666-9366. ; 6:1
-
Tidskriftsartikel (refereegranskat)abstract
- Streams of event weights in particle-level Monte Carlo event generators are a convenient and immensely CPU-efficient approach to express systematic uncertainties in phenomenology calculations, providing systematic variations on the nominal prediction within a single event sample. But the lack of a common standard for labelling these variation streams across different tools has proven to be a major limitation for event-processing tools and analysers alike. Here we propose a well-defined, extensible community standard for the naming, ordering, and interpretation of weight streams that will serve as the basis for semantically correct parsing and combination of such variations in both theoretical and experimental studies.
|
|
| 5. |
- Dembele, Kadiatou Therese, et al.
(författare)
-
Graphene below the percolation threshold in TiO2 for dye-sensitized solar cells
- 2015
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 3:6, s. 2580-2588
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate a fast and large area-scalable methodology for the fabrication of efficient dye sensitized solar cells (DSSCs) by simple addition of graphene micro-platelets to TiO2 nanoparticulate paste (graphene concentration in the range of 0 to 1.5 wt%). Two dimensional (2D) Raman spectroscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM) confirm the presence of graphene after 500°C annealing for 30 minutes. Graphene addition increases the photocurrent density from 12.4 mA cm-2 in bare TiO2 to 17.1 mA cm-2 in an optimized photoanode (0.01 wt% graphene, much lower than those reported in previous studies), boosting the photoconversion efficiency (PCE) from 6.3 up to 8.8%. The investigation of the 2D graphene distribution showed that an optimized concentration is far below the percolation threshold, indicating that the increased PCE does not rely on the formation of an interconnected network, as inferred by prior investigations, but rather, on increased charge injection from TiO2 to the front electrode. These results give insights into the role of graphene in improving the functional properties of DSSCs and identifying a straightforward methodology for the synthesis of new photoanodes.
|
|
| 6. |
- Dembele, Kadiatou Therese, et al.
(författare)
-
Hybrid carbon nanotubes-TiO2 photoanodes for high efficiency dye-sensitized solar cells
- 2013
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 117:28, s. 14510-14517
-
Tidskriftsartikel (refereegranskat)abstract
- We describe a fast and effective procedure for the preparation of high efficiency hybrid photoanodes for dye-sensitized solar cells (DSCs), based on nanocrystalline TiO2 with limited addition of multiwall carbon nanotubes (CNTs). The mixing process between CNTs and TiO2 nanoparticles is almost instantaneous, which makes it feasible for large-scale fabrication. Enhanced electron lifetime and reduced charge recombination lead to highly increased short circuit current density and overall photoconversion efficiency (from 13.6 mA cm-2 to 16.0 mA cm-2 and from 7.0% to 9.0%, respectively, considering the bare TiO2 and the optimum CNTs concentration, which is 0.010 wt %), while the small reduction in open circuit photovoltage does not significantly affect cell performances. This result is remarkable since a standard dye molecule (N719) was used and no chemical treatments of the photoanodes prior to cell fabrication were applied (i.e., soaking in TiCl4 to boost open circuit photovoltage). © 2013 American Chemical Society.
|
|
| 7. |
- Faisal, Nadimul Haque, et al.
(författare)
-
Application of Thermal Spray Coatings in Electrolysers for Hydrogen Production : Advances, Challenges, and Opportunities
- 2022
-
Ingår i: ChemNanoMat. - : Wiley-VCH Verlagsgesellschaft. - 2199-692X. ; 8:12
-
Tidskriftsartikel (refereegranskat)abstract
- Thermal spray coatings have the advantage of providing thick and functional coatings from a range of engineering materials. The associated coating processes provide good control of coating thickness, morphology, microstructure, pore size and porosity, and residual strain in the coatings through selection of suitable process parameters for any coating material of interest. This review consolidates scarce literature on thermally sprayed components which are critical and vital constituents (e. g., catalysts (anode/cathode), solid electrolyte, and transport layer, including corrosion-prone parts such as bipolar plates) of the water splitting electrolysis process for hydrogen production. The research shows that there is a gap in thermally sprayed feedstock material selection strategy as well as in addressing modelling needs that can be crucial to advancing applications exploiting their catalytic and corrosion-resistant properties to split water for hydrogen production. Due to readily scalable production enabled by thermal spray techniques, this manufacturing route bears potential to dominate the sustainable electrolyser technologies in the future. While the well-established thermal spray coating variants may have certain limitations in the manner they are currently practiced, deployment of both conventional and novel thermal spray approaches (suspension, solution, hybrid) is clearly promising for targeted development of electrolysers.
|
|
| 8. |
|
|
| 9. |
- Kaur-Kahlon, Gurpreet, et al.
(författare)
-
Response of a coastal tropical pelagic microbial community to changed salinity and temperature
- 2016
-
Ingår i: Aquatic Microbial Ecology. - : Inter-Research Science Center. - 0948-3055 .- 1616-1564. ; 77:1, s. 37-50
-
Tidskriftsartikel (refereegranskat)abstract
- Studies on the responses of tropical microbial communities to changing hydrographic conditions are poorly represented. We present here the results from a mesocosm experiment conducted in coastal southwestern India to investigate how changes in temperature and salinity may affect a coastal tropical microbial community. The onset of algal and bacterial blooms, maximum production and biomass, and the interrelationship between phytoplankton and bacteria were studied in replicated mesocosms. The treatments were set up to feature ambient conditions (28°C, 35 PSU), hyposalinity (31 PSU), warming (31°C), and a double manipulation treatment with warming and hyposalinity (31°C, 31 PSU). The hyposaline treatment had the most considerable influence, manifested as significantly lower primary production, and the most dissimilar microphytoplankton species community. The increased temperature acted as a catalyst in the double manipulation treatment, and higher primary production was maintained. We investigated the dynamics of the microbial community with a structural equation model and found a significant interrelationship between phytoplankton biomass and bacterial abundance. Using this methodology, it became evident that temperature and salinity changes, individually and together, mediate direct and indirect effects that influence different compartments of the microbial loop. In the face of climate change, we suggest that in relatively nutrient-replete tropical coastal zones, salinity and temperature changes will affect nutrient assimilation, with subsequent significant effects on the quantity of microbial biomass and production.
|
|
| 10. |
- Kumar, Kundan, et al.
(författare)
-
Multirate Undrained Splitting for Coupled Flow and Geomechanics in Porous Media
- 2016
-
Ingår i: NUMERICAL MATHEMATICS AND ADVANCED APPLICATIONS (ENUMATH 2015). - Cham : Springer Publishing Company. - 9783319399294 - 9783319399270 ; , s. 431-440
-
Konferensbidrag (refereegranskat)abstract
- We consider a multirate iterative scheme for the quasi-static Biot equations modelling the coupled flow and geomechanics in a porous medium. The iterative scheme is based on undrained splitting where the flow and mechanics equations are decoupled with the mechanics solve followed by the pressure solve. The multirate scheme proposed here uses different time steps for the two equations, that is, uses q flow steps for each coarse mechanics step and may be interpreted as using a regularization parameter for the mechanics equation. We prove the convergence of the scheme and the proof reveals the appropriate regularization parameter and also the effect of the number of flow steps within coarse mechanics step on the convergence rate.
|
|
