| 1. |
- Elekes, Z., et al.
(författare)
-
Shape coexistence in 66Se
- 2023
-
Ingår i: Physics Letters B. - : Elsevier. - 0370-2693 .- 1873-2445. ; 844
-
Tidskriftsartikel (refereegranskat)abstract
- The nuclear structure of 66Se, nucleus beyond the N=Z line on the proton-rich side of the valley of stability, was investigated by the neutron knock-out reaction 67Se(12C,X)66Se using a 12C target. The analysis of the singles spectrum of the γ-rays emitted during the de-excitation of the populated low-lying excited states revealed two previously detected (927(4) keV, 1460(32) keV) and three new (744(6) keV, 1210(17) keV, 1661(23) keV) transitions. The 744-keV, the 1210-keV, and the 1460-keV transitions were found to be in coincidence with the one at 927 keV. The spectrum coincident with the 927-keV transition showed a further possible transition at 299(35) keV, which was obscured by significant atomic background in the singles spectrum. This transition might correspond to a peak previously reported at 273(5) keV that could not be assigned to 66Se unambiguously. Based on a comparison of the experimental data to theoretical calculations, four new excited states are proposed which suggest that 66Se exhibits shape coexistence.
|
|
| 2. |
- Hudson, Lawrence N, et al.
(författare)
-
The database of the PREDICTS (Projecting Responses of Ecological Diversity In Changing Terrestrial Systems) project
- 2017
-
Ingår i: Ecology and Evolution. - : John Wiley & Sons. - 2045-7758. ; 7:1, s. 145-188
-
Tidskriftsartikel (refereegranskat)abstract
- The PREDICTS project-Projecting Responses of Ecological Diversity In Changing Terrestrial Systems (www.predicts.org.uk)-has collated from published studies a large, reasonably representative database of comparable samples of biodiversity from multiple sites that differ in the nature or intensity of human impacts relating to land use. We have used this evidence base to develop global and regional statistical models of how local biodiversity responds to these measures. We describe and make freely available this 2016 release of the database, containing more than 3.2 million records sampled at over 26,000 locations and representing over 47,000 species. We outline how the database can help in answering a range of questions in ecology and conservation biology. To our knowledge, this is the largest and most geographically and taxonomically representative database of spatial comparisons of biodiversity that has been collated to date; it will be useful to researchers and international efforts wishing to model and understand the global status of biodiversity.
|
|
| 3. |
- Anastasopoulos, M., et al.
(författare)
-
Multi-Grid detector for neutron spectroscopy : Results obtained on time-of-flight spectrometer CNCS
- 2017
-
Ingår i: Journal of Instrumentation. - : IOP PUBLISHING LTD. - 1748-0221 .- 1748-0221. ; 12:4
-
Tidskriftsartikel (refereegranskat)abstract
- The Multi-Grid detector technology has evolved from the proof-of-principle and characterisation stages. Here we report on the performance of the Multi-Grid detector, the MG.CNCS prototype, which has been installed and tested at the Cold Neutron Chopper Spectrometer, CNCS at SNS. This has allowed a side-by-side comparison to the performance of 3He detectors on an operational instrument. The demonstrator has an active area of 0.2 m2. It is specifically tailored to the specifications of CNCS. The detector was installed in June 2016 and has operated since then, collecting neutron scattering data in parallel to the He-3 detectors of CNCS. In this paper, we present a comprehensive analysis of this data, in particular on instrument energy resolution, rate capability, background and relative efficiency. Stability, gamma-ray and fast neutron sensitivity have also been investigated. The effect of scattering in the detector components has been measured and provides input to comparison for Monte Carlo simulations. All data is presented in comparison to that measured by the 3He detectors simultaneously, showing that all features recorded by one detector are also recorded by the other. The energy resolution matches closely. We find that the Multi-Grid is able to match the data collected by 3He, and see an indication of a considerable advantage in the count rate capability. Based on these results, we are confident that the Multi-Grid detector will be capable of producing high quality scientific data on chopper spectrometers utilising the unprecedented neutron flux of the ESS.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
- Hartley, D. J., et al.
(författare)
-
Wobbling mode in Ta-167
- 2009
-
Ingår i: Physical Review C (Nuclear Physics). - 0556-2813. ; 80:4
-
Tidskriftsartikel (refereegranskat)abstract
- The collective wobbling mode, the strongest signature for the rotation of a triaxial nucleus, has previously been seen only in a few Lu isotopes in spite of extensive searches in nearby isotopes. A sequence of transitions in the N = 94 Ta-167 nucleus exhibiting features similar to those attributed to the wobbling bands in the Lu nuclei has now been found. This band feeds into the pi i(13/2) band at a relative energy similar to that seen in the established wobbling bands and its dynamic moment of inertia and alignment properties are nearly identical to the i(13/2) structure over a significant frequency range. Given these characteristics, it is likely that the wobbling mode has been observed for the first time in a nucleus other than Lu, making this collective motion a more general phenomenon.
|
|
| 7. |
- Khaplanov, A., et al.
(författare)
-
Neutron beam monitors for the European spallation source
- 2015
-
Ingår i: 2015 IEEE Nuclear Science Symposium and Medical Imaging Conference, NSS/MIC 2015. - : Institute of Electrical and Electronics Engineers (IEEE). - 9781467398626
-
Konferensbidrag (refereegranskat)abstract
- The European Spallation Source (ESS), currently under construction in Lund, Sweden, will house a suite of 16 user instruments for neutron scattering experiments. The spallation source of the ESS will emit relatively long, 2.8 ms, neutron pulses with an integrated flux that will greatly exceed that of current facilities. This leads to both large advancements in instrument performance as well as to increased length and complexity of the beam delivery systems. The instruments will each be equipped with neutron beam monitors used for data normalisation and analysis, as well as commissioning and diagnostics. In this paper we present the requirements for beam monitors for the ESS and the strategy to meet these in a standardised approach. A large range of specifications in efficiency, dynamic range, time and position resolution, compatible materials are needed. A new feature for neutron beam monitors for some locations, is the ability to measure time profile of each source pulse individually. In general, event mode readout will be used for monitors, similarly to other neutron detectors at the facility. A selection of detectors based on different technologies will be available. Monitors will be integrated with beam lines and choppers in a way that allows to freely choose the type of monitor based on final requirements of an instrument. For this end, space for a standardised module, housing a monitor will be provided in conjunction with chopper assemblies and elsewhere on each beam line.
|
|
| 8. |
- Mucher, D., et al.
(författare)
-
Shell Structure and Shape Changes in Neutron Rich Krypton Isotopes
- 2009
-
Ingår i: AIP Conference Proceedings. - : AIP. - 1551-7616 .- 0094-243X. ; 1090, s. 587-588 672
-
Konferensbidrag (refereegranskat)abstract
- B(E2;2(1)(+) -> 0(1)(+)) values have been measured for the unstable nuclei Kr-88 (N=52) and Kr-92 (N=56) using projectile Coulomb excitation at ISOLDE, CERN. With this experiment the local maximum in E(2(1)(+)) in Kr-92 and the role of the N=56 subshell closure can be studied.
|
|
| 9. |
- Stefanescu, I., et al.
(författare)
-
A B-10-based neutron detector with stacked MultiWire Proportional Counters and macrostructured cathodes
- 2013
-
Ingår i: Journal of Instrumentation. - : Institute of Physics: Hybrid Open Access. - 1748-0221. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- We present the results of the measurements of the detection efficiency for a 4.7 angstrom neutron beam incident upon a detector incorporating a stack of up to five MultiWire Proportional Counters (MWPC) with Boron-coated cathodes. The cathodes were made of Aluminum and had a surface exhibiting millimeter-deep V-shaped grooves of 45 degrees, upon which the thin Boron film was deposited by DC magnetron sputtering. The incident neutrons interacting with the converter layer deposited on the sidewalls of the grooves have a higher capture probability, owing to the larger effective absorption film thickness. This leads to a higher overall detection efficiency for the grooved cathode when compared to a cathode with a flat surface. Both the experimental results and the predictions of the GEANT4 model suggests that a 5-counter detector stack with coated grooved cathodes has the same efficiency as a 7-counter stack with flat cathodes. The reduction in the number of counters in the stack without altering the detection efficiency will prove highly beneficial for large-area position-sensitive detectors for neutron scattering applications, for which the cost-effective manufacturing of the detector and associated readout electronics is an important objective. The proposed detector concept could be a technological option for one of the new chopper spectrometers and other instruments planned to be built at the future European Spallation Source in Sweden. These results with macrostructured cathodes generally apply not just to MWPCs but to other gaseous detectors as well.
|
|
| 10. |
- Stefanescu, I, et al.
(författare)
-
Development of a novel macrostructured cathode for large-area neutron detectors based on the B-10-containing solid converter
- 2013
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576 .- 0167-5087. ; 727, s. 109-125
-
Tidskriftsartikel (refereegranskat)abstract
- We present a novel design for a macrostructured cathode that can be coated with a thin layer of the B-10 solid converter and mounted to replace the Boron-lined flat parallel plates of a proportional counter used for slow neutron detection. The proposed design consists of a 3D regular pattern exhibiting millimeter deep grooves with an opening angle of alpha = 45 degrees, which could be created in the substrate material by milling or forming. When a commonly used coating method like magnetron sputtering is employed to deposit the Boron-layer, due to the line-of-sight distribution of the ions, the thickness of the coating on the side of the grooves will be reduced by a factor similar to sin alpha/2 with respect to the thickness of the layer deposited on a flat surface normal to the ion flux. The effective neutron absorption film thickness is in this case similar for the sidewalls of the grooves and a surface at normal incidence, yielding comparable absorption efficiencies. However, the escape efficiency for the reaction products is higher for the sidewalls, owing to the thinner coating. This leads to a higher overall detection efficiency for the grooved cathode when compared to a flat cathode with the same surface area and coated with a Boron layer with roughly the same thickness. In this paper we present and discuss the GEANT4 simulations performed to optimize the geometry of the cathode, the manufacturing and coating by magnetron sputtering, as well as the proof-of-principle measurements carried out in order to assess the performance of the proposed design.
|
|
