| 1. |
- Aaron, F. D., et al.
(författare)
-
Combined inclusive diffractive cross sections measured with forward proton spectrometers in deep inelastic ep scattering at HERA
- 2012
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 72:10
-
Tidskriftsartikel (refereegranskat)abstract
- A combination of the inclusive diffractive cross section measurements made by the H1 and ZEUS Collaborations at HERA is presented. The analysis uses samples of diffractive deep inelastic ep scattering data at a centre-of-mass energy root s = 318 GeV where leading protons are detected by dedicated spectrometers. Correlations of systematic uncertainties are taken into account, resulting in an improved precision of the cross section measurement which reaches 6 % for the most precise points. The combined data cover the range 2.5 < Q(2) < 200 GeV2 in photon virtuality, 0.00035 < x(P) < 0.09 in proton fractional momentum loss, 0.09 < vertical bar t vertical bar < 0.55 GeV2 in squared four-momentum transfer at the proton vertex and 0.0018 < beta < 0.816 in beta = x/x(P), where x is the Bjorken scaling variable.
|
|
| 2. |
- Abramowicz, H., et al.
(författare)
-
Combination and QCD analysis of charm production cross section measurements in deep-inelastic ep scattering at HERA
- 2013
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 73:2
-
Tidskriftsartikel (refereegranskat)abstract
- Measurements of open charm production cross sections in deep-inelastic ep scattering at HERA from the H1 and ZEUS Collaborations are combined. Reduced cross sections sigma(c (c) over bar)(red) for charm production are obtained in the kinematic range of photon virtuality 2.5 <= Q(2) <= 2000 GeV2 and Bjorken scaling variable 3 . 10(-5) <= x <= 5 . 10(-2). The combination method accounts for the correlations of the systematic uncertainties among the different data sets. The combined charm data together with the combined inclusive deep-inelastic scattering cross sections from HERA are used as input for a detailed NLO QCD analysis to study the influence of different heavy flavour schemes on the parton distribution functions. The optimal values of the charm mass as a parameter in these different schemes are obtained. The implications on the NLO predictions for W-+/- and Z production cross sections at the LHC are investigated. Using the fixed flavour number scheme, the running mass of the charm quark is determined.
|
|
| 3. |
- Echelmeier, A., et al.
(författare)
-
Segmented flow generator for serial crystallography at the European X-ray free electron laser
- 2020
-
Ingår i: Nature Communications. - : Nature Research. - 2041-1723. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- Serial femtosecond crystallography (SFX) with X-ray free electron lasers (XFELs) allows structure determination of membrane proteins and time-resolved crystallography. Common liquid sample delivery continuously jets the protein crystal suspension into the path of the XFEL, wasting a vast amount of sample due to the pulsed nature of all current XFEL sources. The European XFEL (EuXFEL) delivers femtosecond (fs) X-ray pulses in trains spaced 100 ms apart whereas pulses within trains are currently separated by 889 ns. Therefore, continuous sample delivery via fast jets wastes >99% of sample. Here, we introduce a microfluidic device delivering crystal laden droplets segmented with an immiscible oil reducing sample waste and demonstrate droplet injection at the EuXFEL compatible with high pressure liquid delivery of an SFX experiment. While achieving ~60% reduction in sample waste, we determine the structure of the enzyme 3-deoxy-D-manno-octulosonate-8-phosphate synthase from microcrystals delivered in droplets revealing distinct structural features not previously reported.
|
|
| 4. |
- Sobolev, Egor, et al.
(författare)
-
Megahertz single-particle imaging at the European XFEL
- 2020
-
Ingår i: Communications Physics. - : Springer Science and Business Media LLC. - 2399-3650. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- The emergence of high repetition-rate X-ray free-electron lasers (XFELs) powered by superconducting accelerator technology enables the measurement of significantly more experimental data per day than was previously possible. The European XFEL is expected to provide 27,000 pulses per second, over two orders of magnitude more than any other XFEL. The increased pulse rate is a key enabling factor for single-particle X-ray diffractive imaging, which relies on averaging the weak diffraction signal from single biological particles. Taking full advantage of this new capability requires that all experimental steps, from sample preparation and delivery to the acquisition of diffraction patterns, are compatible with the increased pulse repetition rate. Here, we show that single-particle imaging can be performed using X-ray pulses at megahertz repetition rates. The results obtained pave the way towards exploiting high repetition-rate X-ray free-electron lasers for single-particle imaging at their full repetition rate.
|
|
| 5. |
- Sztuk-Dambietz, J., et al.
(författare)
-
Operational experience with Adaptive Gain Integrating Pixel Detectors at European XFEL
- 2024
-
Ingår i: Frontiers in Physics. - : Frontiers Media SA. - 2296-424X. ; 11
-
Forskningsöversikt (refereegranskat)abstract
- The European X-ray Free Electron Laser (European XFEL) is a cutting-edge user facility that generates per second up to 27,000 ultra-short, spatially coherent X-ray pulses within an energy range of 0.26 to more than 20 keV. Specialized instrumentation, including various 2D X-ray detectors capable of handling the unique time structure of the beam, is required. The one-megapixel AGIPD (AGIPD1M) detectors, developed for the European XFEL by the AGIPD Consortium, are the primary detectors used for user experiments at the SPB/SFX and MID instruments. The first AGIPD1M detector was installed at SPB/SFX when the facility began operation in 2017, and the second one was installed at MID in November 2018. The AGIPD detector systems require a dedicated infrastructure, well-defined safety systems, and high-level control procedures to ensure stable and safe operation. As of now, the AGIPD1M detectors installed at the SPB/SFX and MID experimental end stations are fully integrated into the European XFEL environment, including mechanical integration, vacuum, power, control, data acquisition, and data processing systems. Specific high-level procedures allow facilitated detector control, and dedicated interlock systems based on Programmable Logic Controllers ensure detector safety in case of power, vacuum, or cooling failure. The first 6 years of operation have clearly demonstrated that the AGIPD1M detectors provide high-quality scientific results. The collected data, along with additional dedicated studies, have also enabled the identification and quantification of issues related to detector performance, ensuring stable operation. Characterization and calibration of detectors are among the most critical and challenging aspects of operation due to their complex nature. A methodology has been developed to enable detector characterization and data correction, both in near real-time (online) and offline mode. The calibration process optimizes detector performance and ensures the highest quality of experimental results. Overall, the experience gained from integrating and operating the AGIPD detectors at the European XFEL, along with the developed methodology for detector characterization and calibration, provides valuable insights for the development of next-generation detectors for Free Electron Laser X-ray sources.
|
|
| 6. |
- Klačková, I., et al.
(författare)
-
Five years operation experience with the AGIPD detectors at the European XFEL
- 2023
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE - International Society for Optical Engineering. - 9781510662827
-
Konferensbidrag (refereegranskat)abstract
- The European X-ray Free Electron Laser (EuXFEL) began its user operation five years ago, opening and offering new research possibilities. The facility delivers high brilliance, ultra-short, spatially coherent X-ray pulses with a high repetition rate to six instruments (FXE, SPB/SFX, MID, HED, SCS and SQS) by means of three different beamlines (SASE 1, SASE 2 and SASE 3). One of the first detectors used for early-stage experiments was the Adaptive Gain Integrating Pixel Detector (AGIPD), custom designed to meet the challenging needs of scientific instruments. The AGIPD is a megahertz-rate integrating hybrid megapixel camera with a per-pixel adaptive gain amplification, allowing the integration of up to 104 of 12 keV photons per pixel in its low gain stage. Currently, three scientific instruments, namely SPB/SFX, MID and HED employ the AGIPD systems, the latter mentioned using a prototype, half-megapixel camera with an upgraded version of readout ASICs. The AGIPDs at EuXFEL are successfully used for experimental techniques like serial femtosecond crystallography, MHz single particle imaging, MHz X-ray photon correlation spectroscopy or MHz diffraction of materials under high pressures in a diamond anvil cell. Since September 2017, the AGIPD is continuously used and has become an established detector technology, with further advancements and developments planned. Delivering quality experimental data requires reliable and reproducible detector characterisation and calibration that have to be performed regularly with a continuous improvement of correction methods in close collaboration with scientific instruments. This work summarises five years of experience operating the AGIPD detectors at the EuXFEL scientific instruments. It gives an overview of scientific capabilities and examples of successful studies performed with AGIPD detectors. Moreover, challenges concerning detector calibration and characterisation are presented.
|
|
| 7. |
- Turcato, M., et al.
(författare)
-
Small area detectors at the European XFEL
- 2014
-
Ingår i: Journal of Instrumentation. - 1748-0221 .- 1748-0221. ; 9, s. C05063-
-
Tidskriftsartikel (refereegranskat)abstract
- The detectors to be used at the European XFEL have to deal with the unique time structure of the machine, delivering up to 2700 pulses, with a repetition rate of 4.5 MHz, ten times per second, the very high photon flux and the need to combine single-photon sensitivity and a large dynamic range. This represents a challenge not only for the large-area 2D imaging detectors but also for the smaller-area detectors and makes the use of standard commercial devices impossible. Dedicated solutions are therefore envisaged for small imaging- or strip-detectors. In this contribution the focus is put on two particular small-area detector solutions which are planned to be used at the European XFEL, a strip detector for hard X-rays (with energy 3 < E < 25keV) and an imaging detector for soft X-rays (0.25 < E < 3keV). Hard X-rays photon-beam diagnostics as well as hard X-ray absorption and emission spectroscopy at the European XFEL make use of strip detectors as detectors for beam spectrometers or as energy-dispersive detectors in combination with an energy-dispersive element. The European XFEL is establishing cooperation with the Paul Scherrer Institute in Villigen to develop a new version of the Gotthard detector best suited to the European XFEL needs. The use case and the required detector specifications are illustrated. Starting from the present detector version, the modifications planned to adapt it to the European XFEL running conditions are described. These include the capability of running at an increased rate and to provide a veto signal to the large 2D imaging detectors, in order to be able to remove non-interesting images already at early stages of the DAQ system. In another particular application, resonant inelastic X-ray scattering, a Micro-Channel Plate detector matched to a delay-line readout is foreseen to be used. In this case the European XFEL is aiming for a highly customized solution provided by the German company Surface Concept. The use case is described, the science-driven detector specifications are illustrated and the expected detector performance is shown.
|
|
