| 1. |
- Berger, Esmée, 1998, et al.
(author)
-
Runaway dynamics in reactor-scale spherical tokamak disruptions
- 2022
-
In: Journal of Plasma Physics. - 0022-3778 .- 1469-7807. ; 88:6
-
Journal article (peer-reviewed)abstract
- Understanding generation and mitigation of runaway electrons in disruptions is important for the safe operation of future tokamaks. In this paper we investigate the runaway dynamics in reactor-scale spherical tokamaks, focusing on a compact nominal design with a plasma current of 21 megaamperes (MA), 1.8 T magnetic field on axis and major radius of approximately 3 m. We study both the severity of runaway generation during unmitigated disruptions, and the effect that typical mitigation schemes based on massive material injection have on runaway production. The study is conducted using the numerical framework DREAM (Disruption Runaway Electron Analysis Model). We find that, in many cases, mitigation strategies are necessary to prevent the runaway current from reaching multi-MA levels. Our results indicate that, with a suitably chosen deuterium–neon mixture for mitigation, it is possible to achieve a tolerable runaway current and ohmic current evolution. However, this does not account for the runaway source due to wall activation, which has been found to severely limit successful mitigation at conventional aspect ratios, but whose definition requires a more complete wall specification. Furthermore, the majority of the thermal energy loss is found to happen through radial transport rather than radiation, which poses a risk of unacceptable localised heat loads.
|
|
| 2. |
- Creely, A. J., et al.
(author)
-
Overview of the SPARC tokamak
- 2020
-
In: Journal of Plasma Physics. - 0022-3778 .- 1469-7807. ; 86:5
-
Journal article (peer-reviewed)abstract
- The SPARC tokamak is a critical next step towards commercial fusion energy. SPARC is designed as a high-field (B-0 = 12.2 T), compact (R-0 = 1.85 m, a = 0.57 m), superconducting, D-T tokamak with the goal of producing fusion gain Q > 2 from a magnetically confined fusion plasma for the first time. Currently under design, SPARC will continue the high-field path of the Alcator series of tokamaks, utilizing new magnets based on rare earth barium copper oxide high-temperature superconductors to achieve high performance in a compact device. The goal of Q > 2 is achievable with conservative physics assumptions (H-98,H- y2 = 0.7) and, with the nominal assumption of H-98,H- y2 = 1, SPARC is projected to attain Q approximate to 11 and P-fusion approximate to 140 MW. SPARC will therefore constitute a unique platform for burning plasma physics research with high density (< n(e)> approximate to 3 x 10(20) m(-3)), high temperature (< Te > approximate to 7 keV) and high power density (P-fusion/V-plasma approximate to 7 MWm(-3)) relevant to fusion power plants. SPARC's place in the path to commercial fusion energy, its parameters and the current status of SPARC design work are presented. This work also describes the basis for global performance projections and summarizes some of the physics analysis that is presented in greater detail in the companion articles of this collection.
|
|
| 3. |
|
|
| 4. |
- Fülöp, Tünde, 1970, et al.
(author)
-
Effect of plasma elongation on current dynamics during tokamak disruptions
- 2020
-
In: Journal of Plasma Physics. - 0022-3778 .- 1469-7807. ; 86:1
-
Journal article (peer-reviewed)abstract
- Plasma terminating disruptions in tokamaks may result in relativistic runaway electron beams with potentially serious consequences for future devices with large plasma currents. In this paper, we investigate the effect of plasma elongation on the coupled dynamics of runaway generation and resistive diffusion of the electric field. We find that elongated plasmas are less likely to produce large runaway currents, partly due to the lower induced electric fields associated with larger plasmas, and partly due to direct shaping effects, which mainly lead to a reduction in the runaway avalanche gain. © Cambridge University Press 2020.
|
|
| 5. |
- Hesslow, Linnea, 1993, et al.
(author)
-
Evaluation of the Dreicer runaway generation rate in the presence of high-impurities using a neural network
- 2019
-
In: Journal of Plasma Physics. - 0022-3778 .- 1469-7807. ; 85:6
-
Journal article (peer-reviewed)abstract
- Integrated modelling of electron runaway requires computationally expensive kinetic models that are self-consistently coupled to the evolution of the background plasma parameters. The computational expense can be reduced by using parameterized runaway generation rates rather than solving the full kinetic problem. However, currently available generation rates neglect several important effects; in particular, they are not valid in the presence of partially ionized impurities. In this work, we construct a multilayer neural network for the Dreicer runaway generation rate which is trained on data obtained from kinetic simulations performed for a wide range of plasma parameters and impurities. The neural network accurately reproduces the Dreicer runaway generation rate obtained by the kinetic solver. By implementing it in a fluid runaway-electron modelling tool, we show that the improved generation rates lead to significant differences in the self-consistent runaway dynamics as compared to the results using the previously available formulas for the runaway generation rate. © Cambridge University Press 2019.
|
|
| 6. |
- Hesslow, Linnea, 1993, et al.
(author)
-
Influence of massive material injection on avalanche runaway generation during tokamak disruptions
- 2019
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:8
-
Journal article (peer-reviewed)abstract
- In high-current tokamak devices such as ITER, a runaway avalanche can cause a large amplification of a seed electron population. We show that disruption mitigation by impurity injection may significantly increase the runaway avalanche growth rate in such devices. This effect originates from the increased number of target electrons available for the avalanche process in weakly ionized plasmas, which is only partially compensated by the increased friction force on fast electrons. We derive an expression for the avalanche growth rate in partially ionized plasmas and investigate the effects of impurity injection on the avalanche multiplication factor and on the final runaway current for ITER-like parameters. For impurity densities relevant for disruption mitigation, the maximum amplification of a runaway seed can be increased by tens of orders of magnitude compared to previous predictions. This motivates careful studies to determine the required densities and impurity species to obtain tolerable current quench parameters, as well as more detailed modeling of the runaway dynamics including transport effects.
|
|
| 7. |
- Insulander Björk, Klara, 1982, et al.
(author)
-
Kinetic modelling of runaway electron generation in argon-induced disruptions in ASDEX Upgrade
- 2020
-
In: Journal of Plasma Physics. - 0022-3778 .- 1469-7807. ; 86:4
-
Journal article (peer-reviewed)abstract
- Massive material injection has been proposed as a way to mitigate the formation of a beam of relativistic runaway electrons that may result from a disruption in tokamak plasmas. In this paper we analyse runaway generation observed in eleven ASDEX Upgrade discharges where disruption was triggered using massive gas injection. We present numerical simulations in scenarios characteristic of on-axis plasma conditions, constrained by experimental observations, using a description of the runaway dynamics with a self-consistent electric field and temperature evolution in two-dimensional momentum space and zero-dimensional real space. We describe the evolution of the electron distribution function during the disruption, and show that the runaway seed generation is dominated by hot-tail in all of the simulated discharges. We reproduce the observed dependence of the current dissipation rate on the amount of injected argon during the runaway plateau phase. Our simulations also indicate that above a threshold amount of injected argon, the current density after the current quench depends strongly on the argon densities. This trend is not observed in the experiments, which suggests that effects not captured by zero-dimensional kinetic modelling - such as runaway seed transport - are also important.
|
|
| 8. |
- Insulander Björk, Klara, 1982, et al.
(author)
-
Modelling of runaway electron dynamics during argon-induced disruptions in ASDEX Upgrade and JET
- 2021
-
In: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 63:8
-
Journal article (peer-reviewed)abstract
- Disruptions in tokamak plasmas may lead to the generation of runaway electrons that have the potential to damage plasma-facing components. Improved understanding of the runaway generation process requires interpretative modelling of experiments. In this work we simulate eight discharges in the ASDEX Upgrade and JET tokamaks, where argon gas was injected to trigger the disruption. We use a fluid modelling framework with the capability to model the generation of runaway electrons through the hot-tail, Dreicer and avalanche mechanisms, as well as runaway electron losses. Using experimentally based initial values of plasma current and electron temperature and density, we can reproduce the plasma current evolution using realistic assumptions about temperature evolution and assimilation of the injected argon in the plasma. The assumptions and results are similar for the modelled discharges in ASDEX Upgrade and JET. For the modelled discharges in ASDEX Upgrade, where the initial temperature was comparatively high, we had to assume that a large fraction of the hot-tail runaway electrons were lost in order to reproduce the measured current evolution.
|
|
| 9. |
|
|
| 10. |
- Pusztai, Istvan, 1983, et al.
(author)
-
Bayesian optimization of massive material injection for disruption mitigation in tokamaks
- 2023
-
In: Journal of Plasma Physics. - 0022-3778 .- 1469-7807. ; 89:2
-
Journal article (peer-reviewed)abstract
- A Bayesian optimization framework is used to investigate scenarios for disruptions mitigated with combined deuterium and neon injection in ITER. The optimization cost function takes into account limits on the maximum runaway current, the transported fraction of the heat loss and the current quench time. The aim is to explore the dependence of the cost function on injected densities, and provide insights into the behaviour of the disruption dynamics for representative scenarios. The simulations are conducted using the numerical framework Dream (Disruption Runaway Electron Analysis Model). We show that, irrespective of the quantities of the material deposition, multi-megaampere runaway currents will be produced in the deuterium-tritium phase of operations, even in the optimal scenarios. However, the severity of the outcome can be influenced by tailoring the radial profile of the injected material; in particular, if the injected neon is deposited at the edge region it leads to a significant reduction of both the final runaway current and the transported heat losses. The Bayesian approach allows us to map the parameter space efficiently, with more accuracy in favourable parameter regions, thereby providing us with information about the robustness of the optima.
|
|
