| 1. |
- Du, Chun, et al.
(författare)
-
9-Alkylidene-9H-Fluorene-Containing Polymer for High-Efficiency Polymer Solar Cells
- 2011
-
Ingår i: Macromolecules. - : American Chemical Society. - 0024-9297 .- 1520-5835. ; 44:19, s. 7617-7624
-
Tidskriftsartikel (refereegranskat)abstract
- A novel donor-acceptor copolymer containing 9-alkylidene-9H-fluorene unit in the main chain, poly[9-(1-hexylheptylidene)-2,7-fluorene-alt-5, 5-(4,7-di-2-thienyl-5,6-dialkoxy-2,1,3-benzothiadiazole)] (PAFDTBT), has been synthesized and evaluated in bulk heterojunction polymer solar cells (BHJ PSCs). The polymer possesses a low band gap of 1.84 eV, a low-lying HOMO energy level (5.32 eV), and excellent solubility in common organic solvents. PSCs based on PAFDTBT and (6,6)-phenyl-C(71)-butyric add methyl ester (PC(71)BM) demonstrate a power conversion efficiency (PCE) of 6.2% with a high fill factor (FF) of 0.70, which indicates that 9-alkylidene-9H-fluorene can be a very useful building block for constructing narrow band gap conjugated polymers for high-efficiency BHJ PSCs.
|
|
| 2. |
- Li, Weiwei, et al.
(författare)
-
The Effect of additive on performance and shelf-stability of HSX-1/PCBM photovoltaic devices
- 2011
-
Ingår i: Organic electronics. - : Elsevier Science B.V., Amsterdam.. - 1566-1199 .- 1878-5530. ; 12:9, s. 1544-1551
-
Tidskriftsartikel (refereegranskat)abstract
- How 1,8-diiodooctane (DIO) enhances performance of polymer solar cells based on polymer HXS-1 and fullerene [6,6]-phenyl C(71)-butyric acid methyl ester (PC(71)BM) from 3.6% to 5.4% is scrutinized with several techniques by comparing devices or blend films spin-coated from dichlorobenzene (DCB) to those from DCB/DIO (97.5:2.5 v/v). Morphology of blend films is examined with atomic force microscopy (AFM), transmission electron microscopy (TEM) and electron tomography (3-D TEM), respectively. Charge generation and recombination is studied with photoluminescence, and charge transport with field effect transistors. The morphology with domain size in 10-20 nm and vertical elongated clusters formed in DIO system is supposed to facilitate charge transport and minimize charge carrier recombination, which are the main reasons for enhancing power conversion efficiency (PCE) from 3.6% (without DIO) to 5.4% (with DIO). Furthermore, a two year inspection shows no significant impact of DIO on the shelf-stability of the solar cells. No visible degradation in the second year indicates that the morphology of the active layers in the devices is relatively stable after initial relaxation in the first year.
|
|
| 3. |
- Qin, Ruiping, et al.
(författare)
-
A Planar Copolymer for High Efficiency Polymer Solar Cells
- 2009
-
Ingår i: JOURNAL OF THE AMERICAN CHEMICAL SOCIETY. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 131:41, s. 14612-
-
Tidskriftsartikel (refereegranskat)abstract
- An alternating copolymer, poly(2-(5-(5,6-bis(octyloxy)-4-(thiophen-2-yl)benzo[c][1,2,5]thiadiazol-7-yl)thiophen-2-yl)-9-octyt-9H-carbazole) (HXS-1), was designed, synthesized, and used as the donor material for high efficiency polymer solar cells. The close packing of the polymer chains in the solid state was confirmed by XRD. A J(sc) of 9.6 mA/cm(2), a V-proportional to of 0.81 V, an FF of 0.69, and a PCE of 5.4% were achieved with HXS-1 and [6,6]-phenyl C-71-butyric acid methyl ester (PC71BM) as a bulk heterojunction active layer spin-coated from a solvent mixture of 1,2-dichlorobenzene and 1,8-diodooctane (97.5:2.5) under air mass 1.5 global (AM 1.5 G) irradiation of 100 mW/cm(2).
|
|
| 4. |
- Shao, Shuyan, et al.
(författare)
-
In Situ Formation of MoO3 in PEDOT:PSS Matrix: A Facile Way to Produce a Smooth and Less Hygroscopic Hole Transport Layer for Highly Stable Polymer Bulk Heterojunction Solar Cells
- 2013
-
Ingår i: Advanced Energy Materials. - : Wiley-VCH Verlag Berlin. - 1614-6832 .- 1614-6840. ; 3:3, s. 349-355
-
Tidskriftsartikel (refereegranskat)abstract
- A solution-processed neutral hole transport layer is developed by in situ formation of MoO3 in aqueous PEDOT:PSS dispersion (MoO3-PEDOT:PSS). This MoO3-PEDOT:PSS composite film takes advantage of both the highly conductive PEDOT:PSS and the ambient conditions stability of MoO3; consequently it possesses a smooth surface and considerably reduced hygroscopicity. The resulting bulk heterojunction polymer solar cells (BHJ PSC) based on poly[2,3-bis-(3-octyloxyphenyl)quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl] (TQ1):[6,6]-phenyl-C71-butyric acid methyl ester (PC70BM) blends using MoO3-PEDOT:PSS composite film as hole transport layer (HTL) show considerable improvement in power conversion efficiency (PCE), from 5.5% to 6.4%, compared with the reference pristine PEDOT:PSS-based device. More importantly, the device with MoO3-PEDOT:PSS HTL shows considerably improved stability, with the PCE remaining at 80% of its original value when stored in ambient air in the dark for 10 days. In comparison, the reference solar cell with PEDOT:PSS layer shows complete failure within 10 days. This MoO3-PEDOT:PSS implies the potential for low-cost roll-to-roll fabrication of high-efficiency polymer solar cells with long-term stability at ambient conditions.
|
|
