| 1. |
- Abbafati, Cristiana, et al.
(författare)
-
- 2020
-
Tidskriftsartikel (refereegranskat)
|
|
| 2. |
- Mao, Hongwei, et al.
(författare)
-
A novel pipe structure for geyser elimination in a vertical cryogenic pipe
- 2021
-
Ingår i: International Journal of Heat and Mass Transfer. - : Elsevier BV. - 0017-9310. ; 178
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, according to the recirculation concept, a new elimination structure for the geyser in a cryogenic pipe is proposed. An eccentric spacer plate is used to stimulate the recirculation inside the cryogenic pipe. The geyser-elimination effect of the proposed structure is then validated and the elimination physics is explored. It is found that the geyser is successfully eliminated by the stimulated recirculation. The main reason for the geyser elimination effect is the breakdown of the energy storage pattern along the axial direction of the pipe. Compared to the conventional structure, the total weight of the pipe system can be reduced by 25% in the new proposed structure. Moreover, the total heat input can also be reduced by as much as 40%. Furthermore, it is found that the system recirculation ability increases with increasing heat flux. The geyser elimination performance is validated to be effective under a wide heat flux range. Most importantly, the length of the bottom gap in the proposed structure has a critical effect on the geyser elimination since the ability to break down the energy storage becomes weaker as the gap length increases. In order to realize the geyser elimination effect, the bottom gap length is recommended to be 200 mm.
|
|
| 3. |
- Feigin, Valery L., et al.
(författare)
-
Global, regional, and national burden of stroke and its risk factors, 1990-2019 : a systematic analysis for the Global Burden of Disease Study 2019
- 2021
-
Ingår i: Lancet Neurology. - : Elsevier. - 1474-4422 .- 1474-4465. ; 20:10, s. 795-820
-
Tidskriftsartikel (refereegranskat)abstract
- Background Regularly updated data on stroke and its pathological types, including data on their incidence, prevalence, mortality, disability, risk factors, and epidemiological trends, are important for evidence-based stroke care planning and resource allocation. The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) aims to provide a standardised and comprehensive measurement of these metrics at global, regional, and national levels. Methods We applied GBD 2019 analytical tools to calculate stroke incidence, prevalence, mortality, disability-adjusted life-years (DALYs), and the population attributable fraction (PAF) of DALYs (with corresponding 95% uncertainty intervals [UIs]) associated with 19 risk factors, for 204 countries and territories from 1990 to 2019. These estimates were provided for ischaemic stroke, intracerebral haemorrhage, subarachnoid haemorrhage, and all strokes combined, and stratified by sex, age group, and World Bank country income level. Findings In 2019, there were 12.2 million (95% UI 11.0-13.6) incident cases of stroke, 101 million (93.2-111) prevalent cases of stroke, 143 million (133-153) DALYs due to stroke, and 6.55 million (6.00-7.02) deaths from stroke. Globally, stroke remained the second-leading cause of death (11.6% [10.8-12.2] of total deaths) and the third-leading cause of death and disability combined (5.7% [5.1-6.2] of total DALYs) in 2019. From 1990 to 2019, the absolute number of incident strokes increased by 70.0% (67.0-73.0), prevalent strokes increased by 85.0% (83.0-88.0), deaths from stroke increased by 43.0% (31.0-55.0), and DALYs due to stroke increased by 32.0% (22.0-42.0). During the same period, age-standardised rates of stroke incidence decreased by 17.0% (15.0-18.0), mortality decreased by 36.0% (31.0-42.0), prevalence decreased by 6.0% (5.0-7.0), and DALYs decreased by 36.0% (31.0-42.0). However, among people younger than 70 years, prevalence rates increased by 22.0% (21.0-24.0) and incidence rates increased by 15.0% (12.0-18.0). In 2019, the age-standardised stroke-related mortality rate was 3.6 (3.5-3.8) times higher in the World Bank low-income group than in the World Bank high-income group, and the age-standardised stroke-related DALY rate was 3.7 (3.5-3.9) times higher in the low-income group than the high-income group. Ischaemic stroke constituted 62.4% of all incident strokes in 2019 (7.63 million [6.57-8.96]), while intracerebral haemorrhage constituted 27.9% (3.41 million [2.97-3.91]) and subarachnoid haemorrhage constituted 9.7% (1.18 million [1.01-1.39]). In 2019, the five leading risk factors for stroke were high systolic blood pressure (contributing to 79.6 million [67.7-90.8] DALYs or 55.5% [48.2-62.0] of total stroke DALYs), high body-mass index (34.9 million [22.3-48.6] DALYs or 24.3% [15.7-33.2]), high fasting plasma glucose (28.9 million [19.8-41.5] DALYs or 20.2% [13.8-29.1]), ambient particulate matter pollution (28.7 million [23.4-33.4] DALYs or 20.1% [16.6-23.0]), and smoking (25.3 million [22.6-28.2] DALYs or 17.6% [16.4-19.0]). Interpretation The annual number of strokes and deaths due to stroke increased substantially from 1990 to 2019, despite substantial reductions in age-standardised rates, particularly among people older than 70 years. The highest age-standardised stroke-related mortality and DALY rates were in the World Bank low-income group. The fastest-growing risk factor for stroke between 1990 and 2019 was high body-mass index. Without urgent implementation of effective primary prevention strategies, the stroke burden will probably continue to grow across the world, particularly in low-income countries.
|
|
| 4. |
- Wang, Zhe, et al.
(författare)
-
A novel optimization framework for designing multi-stream compact heat exchangers and associated network
- 2017
-
Ingår i: Applied Thermal Engineering. - : Elsevier BV. - 1359-4311. ; 116, s. 110-125
-
Tidskriftsartikel (refereegranskat)abstract
- Despite the performance gains of heat exchangers by thermal-hydraulic optimization, many design approaches suffer from a long process of trial-and-error, limited practical problem formulation and poor robustness. This paper addresses those challenges and develops an optimization framework for designing multi-stream compact heat exchangers. The optimization framework consists of a multi-stream matching organization design with Pinch analysis principles on the heat exchanger network, fin selection and relevant layer pattern using multi-objective algorithm for the thermal-hydraulic modeling, and a field synergy optimization analysis for the temperature field of exchanger. There are compatible with each other by the mutual restriction of design parameters and the process requirements. Finally, by means of a segmented differential calculation, the designed temperature field of all the streams and layers can be obtained. Design capabilities of this optimization framework are investigated on two multi-stream heat exchangers for cryogenic air separation processes. The optimization results are compared with traditional design methods, proving that this framework not only satisfies the specific energy requirement, but also to some extent improves the heat transfer efficiency and reduces the fluid resistance. The developed optimization framework provides a flexible and robust method for numerical simulation and optimization design of multi-stream heat exchangers.
|
|
| 5. |
- Wang, Zhe, et al.
(författare)
-
A thermal design method for the performance optimization of multi-stream plate-fin heat exchangers
- 2017
-
Ingår i: Journal of Mechanical Science and Technology. - : Springer Science and Business Media LLC. - 1738-494X .- 1976-3824. ; 31:6, s. 3017-3024
-
Tidskriftsartikel (refereegranskat)abstract
- An optimization design method based on field synergy principle is developed for Multi-stream plate-fin heat exchangers (MPHEs) with a segmented differential model. The heat exchanger is divided into a number of sub-exchangers along the main stream, and each sub-exchanger consists of N passages along the height of the exchanger. Compared with the traditional heat exchanger design, this method allows temperature and pressure fields to be obtained via coupling calculation with consideration of variable physical properties and the axial heat loss of the heat exchanger. Finally, the heat exchanger is optimally designed using a temperature-difference uniformity optimization factor based on field synergy principle. This design model can provide an accurate temperature field and pressure field, because the stream properties are determined by the mean temperature and pressure of each local sub-exchanger. Optimum results indicate that the temperature distribution on the cross section of the heat exchanger is relatively uniform and that the temperature difference of heat transfer for each stream is always a small value. These characteristics prove the feasibility and effectiveness of this design model. In this paper, a case of five stream plate-fin heat exchangers for an ethylene plant is designed under a practical cold box operating condition with the proposed model, the structure and heat transfer of which are optimally determined. The design model and optimization method proposed in this work can provide theoretical and technical support to the optimization design of MPHEs.
|
|
| 6. |
- Wang, Zhe, et al.
(författare)
-
Numerical Investigation on Thermal Performance Design of Cryogenic Compact Heat Exchangers with Serrated-Fin Channels
- 2020
-
Ingår i: Heat Transfer Engineering. - : Informa UK Limited. - 0145-7632 .- 1521-0537. ; 41, s. 1856-1868
-
Tidskriftsartikel (refereegranskat)abstract
- Traditional empirical formulas of Colburn heat transfer factors will lead to a design deviation for cryogenic heat exchangers. This paper employs the computational fluid dynamics (CFD) technique to numerically study the thermal performance of cryogenic compact heat exchangers (CCHEs). To obtain more precise convective heat transfer coefficients, the heat transfer performance of CCHE with serrated fin channels is analyzed considering various cryogenic fluid properties, fin materials and the axial heat conduction (AHC), and a heat transfer deterioration rate is proposed to investigate the effect of AHC on the heat transfer performance of CCHEs. For the simulation design, a quasi-one-dimensional calculation model is developed to obtain the temperature and pressure fields of the whole heat exchanger using the previous CFD results of the finned channels to avoid the deviation caused by traditional empirical formulas. Finally, a case study for a CCHE in a practical system is designed and analyzed by the proposed approach. The results suggest that cryogenic conditions have a significant effect on the design performance of heat exchangers, especially when considering the influences of fluid properties, materials, and AHC. For different cryogenic fluids, accurate heat transfer factors should be selected for the design calculations, and materials with high thermal conductivity will increase the effect of AHC and deteriorate the performance of the CCHE.
|
|
