| 1. |
- Zhu, Zhifeng, et al.
(författare)
-
Spatiotemporal control of femtosecond laser filament-triggered discharge and its application in diagnosing gas flow fields
- 2022
-
Ingår i: Plasma Science and Technology. - : IOP Publishing. - 1009-0630. ; 24:2
-
Tidskriftsartikel (refereegranskat)abstract
- Precise control of the discharge in space and time is of great significance for better applications of discharge plasma. Here, we used a femtosecond laser filament to trigger and guide a high-voltage DC pulse discharge to achieve spatiotemporal control of the discharge plasma. In space, the discharge plasma is distributed strictly along the channel generated by the femtosecond laser filament. The breakdown voltage threshold is reduced, and the discharge length is extended. In time, the electrical parameters such as the electrode voltage and the electrode gap affect discharge delay time and jitter. By optimizing the parameters, we can achieve sub-nanosecond jitter of the discharge. Based on the spatiotemporal control of the discharge, we applied filament-triggered discharge for one-dimensional composition measurements of the gas flow field. Besides, the technique shows great potential in studying the spatiotemporal evolution of discharge plasma.
|
|
| 2. |
- Cai, Zun, et al.
(författare)
-
Ignition processes and modes excited by laser-induced plasma in a cavity-based supersonic combustor
- 2018
-
Ingår i: Applied Energy. - : Elsevier BV. - 0306-2619. ; 228, s. 1777-1782
-
Tidskriftsartikel (refereegranskat)abstract
- The ignition processes in an ethylene-fueled supersonic combustor excited by laser-induced plasma (LIP) were investigated experimentally under the condition of inflow Ma number of 2.92. The LIP excitation was implemented near the center floor of a flameholding cavity. Optical measurements, including simultaneous CH∗/OH∗ chemiluminescence imaging and Schlieren photography, were used to investigate the ignition processes. It is found that the CH∗ and OH∗ initiated by the LIP are mainly in the region between the cavity front wall and the LIP excitation site. The CH∗ and OH∗ are quenched rapidly, in particular at a low fueling rate. After a short delay, the distribution of CH∗ and OH∗ appears in the region between the rear wall of the cavity and the LIP excitation site, showing the onset of ignition therein. A stable flame was established in the shear layer between the downstream part of the cavity and the outer supersonic flow. It is concluded that the ignition processes excited by the LIP can be divided into a LIP initiation regime and a transient ignition reaction regime. Both the fueling rate and the LIP energy significantly affect the cavity ignition processes. Increasing the fueling rate or the laser energy can shorten the ignition processes in the cavity. A weak ignition mode and an intense ignition mode are postulated to explain the combustion behavior of the ignition processes in the cavity-based supersonic combustor.
|
|
| 3. |
- Ehn, Andreas, et al.
(författare)
-
Advanced laser-based techniques for gas-phase diagnostics in combustion and aerospace engineering
- 2017
-
Ingår i: Applied Spectroscopy. - : SAGE Publications. - 0003-7028 .- 1943-3530. ; 71:3, s. 341-366
-
Forskningsöversikt (refereegranskat)abstract
- Gaining information of species, temperature, and velocity distributions in turbulent combustion and high-speed reactive flows is challenging, particularly for conducting measurements without influencing the experimental object itself. The use of optical and spectroscopic techniques, and in particular laser-based diagnostics, has shown outstanding abilities for performing non-intrusive in situ diagnostics. The development of instrumentation, such as robust lasers with high pulse energy, ultra-short pulse duration, and high repetition rate along with digitized cameras exhibiting high sensitivity, large dynamic range, and frame rates on the order of MHz, has opened up for temporally and spatially resolved volumetric measurements of extreme dynamics and complexities. The aim of this article is to present selected important laser-based techniques for gas-phase diagnostics focusing on their applications in combustion and aerospace engineering. Applicable laser-based techniques for investigations of turbulent flows and combustion such as planar laser-induced fluorescence, Raman and Rayleigh scattering, coherent anti-Stokes Raman scattering, laser-induced grating scattering, particle image velocimetry, laser Doppler anemometry, and tomographic imaging are reviewed and described with some background physics. In addition, demands on instrumentation are further discussed to give insight in the possibilities that are offered by laser flow diagnostics.
|
|
| 4. |
- Ehn, Andreas, et al.
(författare)
-
Plasma assisted combustion: Effects of O3 on large scale turbulent combustion studied with laser diagnostics and Large Eddy Simulations
- 2015
-
Ingår i: Proceedings of the Combustion Institute. - : Elsevier BV. - 1540-7489. ; 35:3, s. 3487-3495
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Abstract In plasma-assisted combustion, electric energy is added to the flame where the electric energy will be transferred to kinetic energy of the free electrons that, in turn, will modify the combustion chemical kinetics. In order to increase the understanding of this complex process, the influence of one of the products of the altered chemical kinetics, ozone (O3), has been isolated and studied. This paper reports on studies using a low-swirl methane (CH4) air flame at lean conditions with different concentrations of O3 enrichment. The experimental flame diagnostics include Planar Laser Induced Fluorescence (PLIF) imaging of hydroxyl (OH) and formaldehyde (CH2O). The experiments are also modeled using Large Eddy Simulations (LES) with a reaction model based on a skeletal CH4-air reaction mechanism combined with an O3 sub-mechanism to include the presence of O3 in the flame. This reaction mechanism is based on fundamental considerations including reactions between O3 and all other species involved. The experiments reveal an increase in CH2O in the low-swirl flame as small amounts of O3 is supplied to the CH4-air stream upstream of the flame. This increase is well predicted by the LES computations and the relative radical concentration shift is in good agreement with experimental data. Simulations also reveal that the O3 enrichment increase the laminar flame speed, su, with ∼10% and the extinction strain-rate, Ïext, with ∼20%, for 0.57% (by volume) O3. The increase in Ïext enables the O3 seeded flame to burn under more turbulent conditions than would be possible without O3 enrichment. Sensitivity analysis indicates that the increase in Ïext due to O3 enrichment is primarily due to the accelerated chain-branching reactions H 2 + O â OH + H , H 2 O + O â OH + OH and H + O 2 â OH + O . Furthermore, the increase in CH2O observed in both experiments and simulations suggest a significant acceleration of the chain-propagation reaction CH 3 + O â CH 2 O + H .
|
|
| 5. |
- Ehn, Andreas, et al.
(författare)
-
Setup for microwave stimulation of a turbulent low-swirl flame
- 2016
-
Ingår i: Journal of Physics D: Applied Physics. - : IOP Publishing. - 0022-3727 .- 1361-6463. ; 49:18
-
Tidskriftsartikel (refereegranskat)abstract
- An experimental setup for microwave stimulation of a turbulent flame is presented. A low-swirl flame is being exposed to continuous microwave irradiation inside an aluminum cavity. The cavity is designed with inlets for laser beams and a viewport for optical access. The aluminum cavity is operated as a resonator where the microwave mode pattern is matched to the position of the flame. Two metal meshes are working as endplates in the resonator, one at the bottom and the other at the top. The lower mesh is located right above the burner nozzle so that the low-swirl flame is able to freely propagate inside the cylinder cavity geometry whereas the upper metal mesh can be tuned to achieve good overlap between the microwave mode pattern and the flame volume. The flow is characterized for operating conditions without microwave irradiation using particle imaging velocimetry (PIV). Microwave absorption is simultaneously monitored with experimental investigations of the flame in terms of exhaust gas temperature, flame chemiluminescence (CL) analysis as well as simultaneous planar laser-induced fluorescence (PLIF) measurements of formaldehyde (CH2O) and hydroxyl radicals (OH). Results are presented for experiments conducted in two different regimes of microwave power. In the high-energy regime the microwave field is strong enough to cause a breakdown in the flame. The breakdown spark develops into a swirl-stabilized plasma due to the continuous microwave stimulation. In the low-energy regime, which is below plasma formation, the flame becomes larger and more stable and it moves upstream closer to the burner nozzle when microwaves are absorbed by the flame. As a result of a larger flame the exhaust gas temperature, flame CL and OH PLIF signals are increased as microwave energy is absorbed by the flame.
|
|
| 6. |
- Gao, Jinlong, et al.
(författare)
-
In-Situ Non-intrusive Diagnostics of Toluene Removal by a Gliding Arc Discharge Using Planar Laser-Induced Fluorescence
- 2017
-
Ingår i: Plasma Chemistry and Plasma Processing. - : Springer Science and Business Media LLC. - 0272-4324 .- 1572-8986. ; 37:2, s. 433-450
-
Tidskriftsartikel (refereegranskat)abstract
- A non-equilibrium gliding arc discharge anchored on two diverging stainless steel electrodes was extended into open air by a toluene-containing air jet. The removal process of the toluene by the non-equilibrium gliding arc discharge was investigated through in situ and non-intrusive laser-based techniques. Simultaneous planar laser-induced fluorescence (PLIF) of toluene and OH radicals were employed to achieve on-line visualization of the toluene decomposing process by the gliding arc discharge column. Toluene PLIF images with high spatial and temporal resolution showed that the non-equilibrium plasma of the gliding arc discharge is effective in decomposing toluene molecules. Instantaneous toluene removal efficiency was estimated from the toluene PLIF images, showing that the initial toluene concentrations and oxygen concentrations affected the toluene removal efficiency. The toluene removal efficiency decreased with the initial toluene concentration, whereas the efficiency increased with the oxygen concentration. The OH generation in the discharge was found to be enhanced with an increase of the toluene concentration from the OH PLIF results. The relative instantaneous distribution between the OH produced from the discharge channels and the toluene flow was simultaneously visualized. The instantaneous distributions of toluene and OH radicals that were acquired simultaneously by PLIF, were well complementary, suggesting that radicals generated by the gliding arc discharge were responsible for toluene removal in the active volume of the gliding arc discharge. The effective width of the plasma volume for the toluene removal were measured, which gives a new insight into the optimization of industrial design for practical gliding arc reactors.
|
|
| 7. |
- Gao, Jinlong, et al.
(författare)
-
Visualization of instantaneous structure and dynamics of large-scale turbulent flames stabilized by a gliding arc discharge
- 2019
-
Ingår i: Proceedings of the Combustion Institute. - : Elsevier BV. - 1540-7489. ; 37:4, s. 5629-5636
-
Tidskriftsartikel (refereegranskat)abstract
- A burner design with integrated electrodes was used to couple a gliding arc (GA) discharge to a high-power and large-scale turbulent flame for flame stabilization. Simultaneous OH and CH2O planar laser-induced fluorescence (PLIF) and CH PLIF measurements were conducted to visualize instantaneous structures of the GA-assisted flame. Six different regions of the GA-assisted flame were resolved by the multi-species PLIF measurements, including the plasma core, the discharge-induced OH region, the post-flame OH region, the flame front, the preheat CH2O region and the fresh gas mixture. Specifically, the OH profile was observed to be ring-shaped around the gliding arc discharge channel. The formaldehyde (CH2O) was found to be widely distributed in the entire measurement volume even at a low equivalence ratio of 0.4, which suggest that long-lived species from the gliding arc discharge have induced low-temperature oxidations of CH4. The CH layer coincides with the interface of the OH and CH2O regions and indicates that the flame front and the discharge channel are spatially separated by a distance of 3-5 mm. These results reveal that the discharge column acts as a movable pilot flame, providing active radicals and thermal energy to sustain the flame. High-speed video photography was also employed to record the dynamics of the GA-assisted flame. This temporally resolved data was used to study the ignition and propagation behaviors of the flame in response to a temporally modulated burst-mode discharge. The results indicate that turbulent flame can be sustained by matching temporal parameters of the high-voltage bursts to the extinction time of flame.
|
|
| 8. |
- He, Yong, et al.
(författare)
-
In-situ Measurement of Sodium and Potassium Release during Oxy-Fuel Combustion of Lignite using Laser-Induced Breakdown Spectroscopy: Effects of O-2 and CO2 Concentration
- 2013
-
Ingår i: Energy & Fuels. - : American Chemical Society (ACS). - 0887-0624 .- 1520-5029. ; 27:2, s. 1123-1130
-
Tidskriftsartikel (refereegranskat)abstract
- Laser-induced breakdown spectroscopy (LIBS) was used in this study to measure quantitatively the sodium (Na) and potassium (K) release from burning coal particles under oxy-fuel combustion environments. A specially designed laminar premixed burner was employed to provide a postflame environment with different O-2 and CO2 concentrations, in which the effects of O-2 and CO2 on the release of Na and K during coal oxy-fuel combustion were studied systematically. For the devolatilization stage, neither O-2 nor CO2 had significant influence on the Na and K release. The release of Na and K during the char stage, however, changed significantly at different O-2 and CO2 concentrations. Under these experimental conditions, when the O-2 concentration increased from 3.9% to 10.6%, the peak concentration of Na at the char stage increased from 15.2 mg/m(3) to 33.7 mg/m(3), and the maximum concentration of K increased from 6.2 mg/m(3) to 11.7 mg/m(3). When the CO2 concentration increased from 35.8% to 69.4%, the release of Na and K was inhibited during the char stage, with the peak concentration decreasing from 8.9 mg/m(3) to 6.9 mg/m(3) for Na and from 3.7 mg/m(3) to 2.4 mg/m(3) for K. During the ash stage, the release of Na and K decreased with the O-2 concentration, whereas it increased with the CO2 concentration.
|
|
| 9. |
- Kong, Chengdong, et al.
(författare)
-
Characteristics of a Gliding Arc Discharge Under the Influence of a Laminar Premixed Flame
- 2019
-
Ingår i: IEEE Transactions on Plasma Science. - 0093-3813. ; 47:1, s. 403-409
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of combustion on a gliding arc (GA) discharge is investigated using simultaneous measurements of current and voltage waveforms, as well as imaging and spectroscopic analysis of plasma and flame luminescence. Attributed to the existence of flame, the breakdown voltage and current peak are reduced and the bright sparks during breakdown are dampened. The intrinsic reason is largely owing to the thermal effect of flame. Electrical breakdown is mainly determined by the reduced electric field strength (E/N), which is inversely proportional to temperature. Assuming a constant E/N for breakdown, the combustion-induced temperature increment gives rise to a reduction of the breakdown voltage. The gas composition seems to have less impact on the breakdown voltage. However, the addition of CH₄ can induce more radicals (e.g., H atoms) that enhance the intensity of relevant spectral emissions, especially from OH*. Due to the transport of relatively long-lived radicals, the width of the plasma column of the GA discharge is broadened to form a local reaction zone, serving as a flame holder. Interestingly, the plasma channel moves more smoothly as the flame is present. It implies that the flow field is less turbulent owing to combustion.
|
|
| 10. |
- Kong, Chengdong, et al.
(författare)
-
Characterization of an AC glow-type gliding arc discharge in atmospheric air with a current-voltage lumped model
- 2017
-
Ingår i: Physics of Plasmas. - : AIP Publishing. - 1070-664X .- 1089-7674. ; 24:9
-
Tidskriftsartikel (refereegranskat)abstract
- Quantitative characterization of a high-power glow-mode gliding arc (GM-GA) discharge operated in open air is performed using a current-voltage lumped model that is built from the perspective of energy balance and electron conservation. The GM-GA discharge is powered by a 35 kHz alternating current power supply. Instantaneous images of the discharge volume are recorded using a high-speed camera at a frame rate of 50 kHz, synchronized with the simultaneously recorded current and voltage waveforms. Detailed analyzation indicates that the electrical input power is dissipated mainly through the transport of vibrationally excited nitrogen and other active radicals (such as O). The plasma is quite non-thermal with the ratio of vibrational and translational temperatures (Tv/Tg) larger than 2 due to the intense energy dissipation. The electron number density reaches 3 × 1019 m-3 and is always above the steady value owing to the short cutting events, which can recover the electron density to a relatively large value and limits the maximum length of the gliding arc. The slow decaying rate of electrons is probably attributed to the decomposed state of a hot gaseous mixture and the related associative ionization.
|
|
