| 1. |
- Sundell, Jonas, 1984, et al.
(författare)
-
Economic valuation of hydrogeological information when managing groundwater drawdown
- 2019
-
Ingår i: Hydrogeology Journal. - : Springer Science and Business Media LLC. - 1431-2174 .- 1435-0157. ; 27:4, s. 1111-1130
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019, The Author(s). A procedure is presented for valuation of information analysis (VOIA) to determine the need for additional information when assessing the effect of several design alternatives to manage future disturbances in hydrogeological systems. When planning for groundwater extraction and drawdown in areas where risks—such as land subsidence, wells running dry and drainage of streams and wetlands—are present, the need for risk-reducing safety measures must be carefully evaluated and managed. The heterogeneity of the subsurface calls for an assessment of trade-offs between the benefits of additional information to reduce the risk of erroneous decisions and the cost of collecting this information. A method is suggested that combines existing procedures for inverse probabilistic groundwater modelling with a novel method for VOIA. The method results in (1) a prior analysis where uncertainties regarding the efficiency of safety measures are estimated, and (2) a pre-posterior analysis, where the benefits of expected uncertainty reduction deriving from additional information are compared with the costs for obtaining this information. In comparison with existing approaches for VOIA, the method can assess multiple design alternatives, use hydrogeological parameters as proxies for failure, and produce spatially distributed VOIA maps. The method is demonstrated for a case study of a planned tunnel in Stockholm, Sweden, where additional investigations produce a low number of benefits as a result of low failure rates for the studied alternatives and a cause-effect chain where the resulting failure probability is more dependent on interactions within the whole system rather than on specific features.
|
|
| 2. |
- Sundell, Jonas, 1984, et al.
(författare)
-
Comprehensive risk assessment of groundwater drawdown induced subsidence
- 2019
-
Ingår i: Stochastic Environmental Research and Risk Assessment. - : Springer Science and Business Media LLC. - 1436-3240 .- 1436-3259. ; 33:2, s. 427-449
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019, The Author(s). We present a method for risk assessment of groundwater drawdown induced land subsidence when planning for sub-surface infrastructure. Since groundwater drawdown and related subsidence can occur at large distances from the points of inflow, the large spatial extent often implies heterogeneous geological conditions that cannot be described in complete detail. This calls for estimation of uncertainties in all components of the cause-effect chain with probabilistic methods. In this study, we couple four probabilistic methods into a comprehensive model for economic risk quantification: a geostatistical soil-stratification model, an inverse calibrated groundwater model, an elasto-plastic subsidence model, and a model describing the resulting damages and costs on individual buildings and constructions. Groundwater head measurements, hydraulic tests, statistical analyses of stratification and soil properties and an inventory of buildings are inputs to the models. In the coupled method, different design alternatives for risk reduction measures are evaluated. Integration of probabilities and damage costs result in an economic risk estimate for each alternative. Compared with the risk for a reference alternative, the best prior alternative is identified as the alternative with the highest expected net benefit. The results include spatial probabilistic risk estimates for each alternative where areas with significant risk are distinguished from low-risk areas. The efficiency and usefulness of this modelling approach as a tool for communication to stakeholders, decision support for prioritization of risk reducing measures, and identification of the need for further investigations and monitoring are demonstrated with a case study of a planned railway tunnel in Varberg, Sweden.
|
|
| 3. |
- Ribeiro, Luis, et al.
(författare)
-
Industrial Agents for the Fast Deployment of Evolvable Assembly Systems
- 2015. - 1st ed.
-
Ingår i: Industrial Agents. - Amsterdam, Netherlands : Elsevier. - 9780128003411 ; , s. 301-321, s. 301-322
-
Bokkapitel (refereegranskat)abstract
- The current manufacturing scenario is characterized by high market unpredictability. Agility is therefore a central challenge for modern companies that need to understand and be proactive towards their product offer in respect to “what is offered, when it is offered, where, how and by whom” (Brown & Bessant 2003).The “what” and the “when” are particularly relevant to the research in emerging paradigms as they account for variety, customization and volume; and timing, speed and seasonality (Brown & Bessant 2003).In this scenario, several design approaches and models have been proposed in the last decade to enable re-configurability and subsequently enhance the companies’ ability to adjust their offer in nature and time.From a paradigmatic point of view research has concentrated on the organizational structure of the shop-floor and the associated controls aspects. Concepts like Reconfigurable Manufacturing Systems (RMS) (Koren & Shpitalni 2010) and Fractal Factories (FF) (Montreuil 1999) support the physical construction of production systems by regulating their layout and making a few assumptions on their logical organization. On the other hand, concepts like Bionic Manufacturing Systems (BMS)(Ueda 1992), Holonic Manufacturing Systems (HMS)(Van Brussel et al. 1998), Evolvable Assembly Systems (Ribeiro et al. 2010) essentially provide the theoretical guidelines for the logical/computational organization of the system (see (Tharumarajah 1996) for a comparison between BMS, HMS and FF and (Setchi & Lagos 2004) for the rationale supporting the shift from Dedicated Lines to Flexible Manufacturing System and finally RMS).While these paradigms provide the conceptual framework and the main design guidelines their actual interpretation and implementation has led to a wider set of architectures (Monostori, Váncza & Kumara 2006; Leitão 2009; Parunak 2000; Pěchouček & Mařík 2008).These architectures align the high-level principles with the technological offer and limitations while seeking to address the re-configurability requirements of (Mehrabi, Ulsoy & Koren 2000; Rösiö & Säfsten 2013):module mobility – modules are easy and quick to move and install;“diagnosability” – it is quick to identify the sources of quality and reliability problems;“integrability” – modules are easy to integrate into the rest of the system.“convertibility” – it is easy and quick to switch between existing products and it is easy to adapt the system to future products;scalability – it is easy to enlarge and downsize the production system;“automatibility” – a dynamic level of automation is enabled;modularity – all system elements are designed to be modular;customization – the capability and flexibility of the production system is designed according to the products to be produced in the system.Instant deployment, as addressed in the present chapter directly addresses mobility, “integrability”, “convertibility”, scalability and customization. Mechatronic modularity is a prerequisite and is enforced by the proposed architecture and the considered modular design. “Diagnosability” was not specifically tackled.In this context, the chapter analyses the agent-based architecture related with the Instantly Deployable Evolvable Assembly System (IDEAS) project that is inspired by the Evolvable Assembly System (EAS) paradigm (Ribeiro et al. 2010) as a mechanism to enable fast deployment of mechatronic modules. EAS advocates the use of process-oriented modules and envisions the production system as a collection of processes and the associated interacting agents.The architecture and the related test cases are used to draw the main lessons learned in respect to technological and conceptual implications.In this context, the remainder of this text is organized as follows: section 1.1 discusses the main deployment challenges, section 1.2 details the reference architecture and associated concepts, section 1.3 presents the principal implementation decisions, section 1.4 features the main lessons learned, sections 1.5 discusses the benefits of the proposed approach and finally section 1.6 reflects on the main conclusions.
|
|
| 4. |
-
VTI:s och TFB:s forskardagar : del 2
- 1993
-
Proceedings (redaktörskap) (övrigt vetenskapligt/konstnärligt)abstract
- Rapportsammanställning av föredrag vid forskardagarna 1993-01-11--12 beträffande:geoteknik inom transportsektorntransporterna i ett framtida EGden internationella och svenska flygmarknaden inför framtidenkan sjöfarten stärka sin ställning som ett transport- och miljövänligt alternativ till andra transportslag?förbättrad säkerhet med hjälp av informationsteknologi (RTI) och annan modern teknikRTI på svenska vägarutveckling av kostnadseffektiva material/transportflödennationella trafikprognoserforskningsinformation i förändringinfrastrukturen och dess betydelse för samhället
|
|
| 5. |
- Cano-Viktorsson, Carlos, 1977-
(författare)
-
From Maps to Apps : Tracing the Organizational Responsiveness of an Early Multi-Modal Travel Planning Service
- 2015
-
Ingår i: The Journal of urban technology. - London : Taylor & Francis. - 1063-0732 .- 1466-1853. ; 22:4, s. 87-101
-
Tidskriftsartikel (refereegranskat)abstract
- An Internet-based system for informing on multimodal travel planning (several modes of transportation) was introduced in Stockholm, Sweden in October 2000 in the form of a web page called trafiken.nu. The web page has a historical value of being one of the first attempts in Europe, and possibly the world, at providing an ICT-based travel planning service geared towards facilitating sustainable travel to the general public. The aim of this article is to investigate the historical development of trafiken.nu in order to draw lessons on how to better provide for a public information service with a potential for facilitating sustainable travel planning. Findings from the study of trafiken.nu suggest that the organizations behind the service have been slow in adapting to shifting media technology practices on how to provide for information which has affected the uptake of the service. Lessons from the case study provide a basis for arguing that organizations attempting to implement public information services would benefit from finding a means of harnessing collective intelligence in order to provide for a more customizable and responsive service to the general public.
|
|
| 6. |
- Andersson, Jonas, et al.
(författare)
-
The Human-Tech Matrix : A Socio-Technical Approach to Evaluation of Automated Transport Systems
- 2019
-
Ingår i: Adv. Intell. Sys. Comput.. - Cham : Springer International Publishing. - 9783030020521 ; , s. 375-380
-
Konferensbidrag (refereegranskat)abstract
- An automated transport system has the potential to improve traffic safety and flow, but also to the accessibility and comfort for users of the transport system. Realizing the positive effects with automated transport is about shaping regulatory, organizational and technical systems. Here, appropriate evaluation enables steering efforts in the desired direction. The overall aim of this study was to develop a methodological framework that could identify effects of an automated transport system, and outline methods and metrics for evaluation of these effects. We propose a tentative case-based methodology to define measures of the effects of an automated transport system that will give key stakeholders new possibilities to evaluate research and development projects and efforts connected to automation of the transport system, and thereby manage these in a human-centered direction. © 2019, Springer Nature Switzerland AG.
|
|
| 7. |
- Dymitrow, Mirek, et al.
(författare)
-
Crossing dichotomies and breaking mental patterns: Green business development when all else fails?
- 2017
-
Ingår i: 8th International Scientific Conference “Rural Development 2017: Bioeconomy Challenges”, 23–24 November, 2017 Kaunas, Lithuania.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Obtaining sustainable and inclusive societal organization is not merely a simple matter of ‘doing it’ by subscribing to some winning formula. Given that conceptual frameworks always guide our thoughts, judgments and actions (Latour, 2013; Harvey, 1996; Dennett, 1993), the ways in which we relate to concepts chosen to serve as guiding forces for future development will eventually determine its outcome. As scholarly evidence continuously suggests the concepts ‘rural’ and ‘urban’ are increasingly recognized as artificial barriers for conducting sound and integrated development endeavors in a globalized reality of interconnectedness. In line with the Sustainable Development Goals, which aim to eradicate poverty, shield the planet and safeguard prosperity for all, commitment to universal access to healthy food year round has become an important agenda point. This, however, has been exacerbated by binary thinking and separate ways of doing policy. This paper aims to share experiences from a unique project launched in the northern parts of Gothenburg, Sweden’s second largest city. While the area offers ample resources and immense opportunities for areal economies, it at the same time remains one of Gothenburg’s most segregated, with high levels of unemployment, ill health and crime. The uniqueness of the project lies not only in its way of abridging the rural-urban divide, but also by consciously deferring from the debilitating rhetoric of previous ‘immigrant policies’, and instead focusing on agricultural productivity, small-scale food producers and sustainable food strategies. Such exhortations to bridge between philosophical and material polarities, however, have not come without conceptual and practical challenges, something this paper aims to subsume and open up to debate.
|
|
| 8. |
|
|
| 9. |
- Steinmetz, Erik, et al.
(författare)
-
Theoretical Limits on Cooperative Positioning in Mixed Traffic
- 2019
-
Ingår i: IEEE Access. - : Institute of Electrical and Electronics Engineers Inc.. - 2169-3536. ; 7, s. 49712-49725
-
Tidskriftsartikel (refereegranskat)abstract
- A promising solution to meet the demands on accurate positioning and real-time situational awareness in future intelligent transportation systems (ITSs) is cooperative positioning, where vehicles share sensor information over the wireless channel. However, the sensing and communication technologies required for this will be gradually introduced into the market, and it is, therefore, important to understand what performance we can expect from cooperative positioning systems as we transition to a more modern vehicle fleet. In this paper, we study what effects a gradual market penetration has on cooperative positioning applications, through a Fisher information analysis. The simulation results indicate that solely introducing a small fraction of automated vehicles with high-end sensors significantly improves the positioning quality but is not enough to meet the stringent demands posed by safety critical ITS applications. Furthermore, we find that retrofitting vehicles with low-cost satellite navigation receivers and communication have marginal impact when the positioning requirements are stringent and that the longitudinal road position can be estimated more accurately than lateral. © 2013 IEEE.
|
|
| 10. |
- Awais, Fawad, et al.
(författare)
-
Logistic characteristics and requirements of Swedish wood biofuel heating plants
- 2021
-
Ingår i: Renewable & sustainable energy reviews. - : Elsevier Ltd. - 1364-0321 .- 1879-0690. ; 138
-
Tidskriftsartikel (refereegranskat)abstract
- The demand for wood biofuel for district heating plants and combined heat and power plants (CHPs) has increased, caused by an increase in both the number and size of CHPs. This places large demands on the logistics system supplying these plants with fuel, with a particular interest in the use of alternative modes of transport such as rail and sea. The aim of this paper is to identify the industry actors’ requirements, constraints, and preferences regarding the wood-biofuel supply chain and to identify the logistical challenges this entails, as well as how this impacts the opportunity for an increased use of alternative transport solutions. A survey was sent to all Swedish CHPs, combined with six interviews with transport companies, terminal operators, and forest companies. The study shows that the industry has a local focus that limits potential logistics and sourcing solutions. It is also challenged by urban sprawl, with expanding residential areas close to the CHPs putting further constraints on the operations. Significant variations in fuel demand, depending on unpredictable outside temperature and seasonal variation, is a further challenge. The low density of the fuel has a negative impact on transport costs and introduces a trade-off between chipping close to the forest to increase density versus more efficient chipping at the CHP. Intermodal transport only used by large plants, driven by a shortage of local fuel. © 2020 The Authors
|
|
