| 1. |
- Ferrow, Embaie, et al.
(författare)
-
Characterization of pyrrhotite in Cu-Ni-ore bodies from mines in Botswana by Mossbauer spectroscopy, X-ray diffraction, and thermomagnetometry
- 2006
-
Ingår i: European Journal of Mineralogy. - : Schweizerbart. - 1617-4011 .- 0935-1221. ; 18:5, s. 653-664
-
Tidskriftsartikel (refereegranskat)abstract
- Cu-Ni ore bodies from five Botswana mines were investigated, using a combination of X-ray diffraction, thermomagnetic measurements, Mossbauer spectroscopy, and Inductively Coupled Plasma-Atomic Absorption Electro-optic Spectroscopy (ICP-AES). The four dominant phases in the ores were found to be pyrrhotite, magnetite, pentlandite, and chalcopyrite. Mossbauer spectroscopy shows that pyrrhotite is the dominant Fe-bearing phase in the samples with 75 % in B-S1, 84 % in B-S2, and 80 % in B-S4 and was selected for detailed characterization. Our results show that the three first techniques provide an excellent approach to estimate the degree of polytype intermixing in pyrrhotite. Accordingly, the ores can be grouped into three types: A hexagonal (or peak-type), with a 5c stacking arrangement; a monoclinic (or Weiss-type), with a 4c stacking arrangement; and a mixture of monoclinic and hexagonal types. A low-temperature study of the monoclinic form shows that the low-temperature magnetic transition close to 35 K has features similar to the Verwey transition in magnetite induced by Jahn-Teller distortion due to orbital order-disorder transition.
|
|
| 2. |
- Ferrow, Embaie
(författare)
-
Experimental weathering of biotite, muscovite and vermiculite: a Mossbauer spectroscopy study
- 2002
-
Ingår i: European Journal of Mineralogy. - : Schweizerbart. - 1617-4011 .- 0935-1221. ; 14:1, s. 85-95
-
Tidskriftsartikel (refereegranskat)abstract
- Biotite, muscovite and vermiculite were treated in HCl and H2SO4 solutions at pH ranging between 7 and 1. The solid residue was studied using Mossbauer spectroscopy at room temperature. The spectra of the untreated samples, D0Bio, D0Mus and DOVer were fitted assuming quadrupole splitting distribution, QSD. Different fitting models with different combinations of Gaussian components for the Fe sites were tested and the models with chi(2) near 1.0+/-0.1237 and with the least number of free parameters were adopted as working models. The models were then used to fit the experimental products of each group. If a model fails to describe a spectrum of a sample in the group then this is taken to signal a significant crystal chemical change induced by weathering. All three minerals are oxidized during weathering and the correlation between oxidation ratio and pH is modeled using a Weibull function. The rate of oxidation in biotite is higher than that in muscovite and vermiculite, The average CS and QS of the Fe sites in a group remain more or less constant during the experiment. However, the position of the peak QS of Fe-[6](2+) in biotite is shifted to low energies with decreasing pH, a measure of the decreasing covalence character of the Fe/Mg-O bonds. In muscovite the major feature observed is the enhancement of the bi-modal distribution of the QSD of Fe-[6](2+) with decreasing pH.
|
|
| 3. |
- Ferrow, Embaie
(författare)
-
Non-integral hybrid ions in tourmaline: buffering and geo-thermometry
- 2009
-
Ingår i: European Journal of Mineralogy. - : Schweizerbart. - 1617-4011 .- 0935-1221. ; 21:1, s. 241-250
-
Tidskriftsartikel (refereegranskat)abstract
- The tourmaline group of minerals is indeed an enigma. Experimental data from optical spectroscopy, electron microscopy, and Mossbauer spectroscopy reveal a host of physical properties that lack a common structural clarification. For example, tourmaline samples change colour when irradiated with X-ray and gamma-ray radiations some reverting back when heated in air; exhibit simultaneous oxidation and reduction on annealing in an atmosphere of H-2; display different plane group symmetries under TEM; possess the most complicated Mossbauer spectra of all Fe-bearing silicates. In this study, four Brazilian samples were chosen for detailed study by Mossbauer spectroscopy to find out a common structural factor to the physical anomalies reported in the literature. It was found out that the tourmaline group of minerals contain multi-valence elements that are involved in electron exchange between the edge-sharing asymmetric Y and Z crystallographic sites. It is conceivable that the host of physical properties recorded in the literature could be due to the inherent structural misfit between the Y and Z sites and the mechanisms adopted to reduce the strain associated along the shared edges. The complexity of non-integral oxidation states possible - due to electron sharing among the different multi-valence elements present in the structure - further enhances the diverse physical properties observed. Moreover, on heating in air, no net oxidation or reduction takes place in the tourmaline group of minerals over a temperature range as long as there are electron donors and acceptors left in the structure, serving simultaneously as potential single-phase buffers and geo-thermometers.
|
|
| 4. |
- Lastusaari, Mika, et al.
(författare)
-
The Bologna Stone: history's first persistent luminescent material
- 2012
-
Ingår i: European Journal of Mineralogy. - : Schweizerbart. - 1617-4011 .- 0935-1221. ; 24:5, s. 885-890
-
Tidskriftsartikel (refereegranskat)abstract
- In 1603, the Italian shoemaker Vincenzo Cascariolo found that a stone (baryte) from the outskirts of Bologna emitted light in the dark without any external excitation source. However, the calcination of the baryte was needed prior to this observation. The stone later named as the Bologna Stone was among the first luminescent materials and the first documented material to show persistent luminescence. The mechanism behind the persistent emission in this material has remained a mystery ever since. In this work, the Bologna Stone (BaS) was prepared from the natural baryte (Bologna, Italy) used by Cascariolo. Its properties, e. g. impurities (dopants) and their valences, luminescence, persistent luminescence and trap structure, were compared to those of the pure BaS materials doped with different (transition) metals (Cu, Ag, Pb) known to yield strong luminescence. The work was carried out by using different methods (XANES, TL, VUV-UV-vis luminescence, TGA-DTA, XPD). A plausible mechanism for the persistent luminescence from the Bologna Stone with Cu+ as the emitting species was constructed based on the results obtained. The puzzle of the Bologna Stone can thus be considered as resolved after some 400 years of studies.
|
|
| 5. |
- Chukanov, Nikita V., et al.
(författare)
-
Långbanshyttanite, a new low-temperature arsenate mineral with a novel structure from Långban, Sweden
- 2011
-
Ingår i: European journal of mineralogy. - : Schweizerbart. - 0935-1221 .- 1617-4011. ; 23:4, s. 675-681
-
Tidskriftsartikel (refereegranskat)abstract
- The new mineral långbanshyttanite was discovered in a specimen from the Långban mine (59.86 degrees N, 14.27 degrees E), Filipstad district, Varmland County, Bergslagen ore province, Sweden. Associated minerals are calcite, Mn-bearing phlogopite, spinels of the jacobsite-magnetite series, antigorite and trigonite. The mineral is named after the old name of the mine, smelter and mining village: Långbanshyttan. Långbanshyttanite is transparent, colourless. It occurs in late-stage fractures or corroded pockets, forming soft, radial and random aggregates (up to 1 mm) of acicular crystals up to 5 x 20 x 400 mu m. D(calc) is 3.951 g/cm(3). The new mineral is biaxial (+), alpha = 1.700(5), beta = 1.741(5), gamma = 1.792(5), 2V (meas.) approximate to 90 degrees, 2V (calc.) = 86 degrees. Dispersion is strong, r < v. The IR spectrum is given. The chemical composition is (electron microprobe, mean of five analyses, wt%): PbO 44.71, MgO 3.79, MnO 13.34, FeO 1.89, P(2)O(5) 0.65, As(2)O(5) 22.90, H(2)O (determined by gas chromatographic analysis of the products of ignition at 1200 degrees C) 14.4; total 101.68. The empirical formula based on 18 O atoms is: Pb(1.97)Mn(1.85)Mg(0.93)Fe(0.26)(AsO(4))(1.96)(PO(4))(0.09)(OH)(3.87)cen ter dot 5.93H(2)O. The simplified formula is: Pb(2)Mn(2)Mg(AsO(4))(2)(OH)(4)center dot 6H(2)O. Single-crystal diffraction data obtained using synchrotron radiation indicate that långbanshyttanite is triclinic, P<(1)over bar>, a = 5.0528(10), b = 5.7671(6), c = 14.617(3) angstrom, alpha = 85.656(14), beta = 82.029(17), gamma = 88.728(13)degrees, V = 420.6(2) angstrom(3), Z = 1, and is a representative of a new structure type. In the structure, edge-sharing MnO(2)(OH)(4) octahedra form zig-zag columns that are linked by isolated AsO(4) tetrahedra. Pb cations having six-fold coordination are located between the AsO(4) tetrahedra. Isolated Mg(H(2)O)(6) octahedra are located in the inter-block space. The strongest lines of the powder diffraction pattern [d, angstrom (I,%) (hkl)] are: 14.48 (100) (001), 7.21 (43) (002), 4.969 (34) (100, 101), 4.798 (28) (003), 3.571 (54) (112, 1-1-1, 01-3, 11-1), 2.857 (45) (020, 021, 114), 2.800 (34) (11-3). Parts of the holotype specimen are deposited in the Fersman Mineralogical Museum of Russian Academy of Sciences, Moscow, Russia, with the registration number 4032/1 and in the collections of the Swedish Museum of Natural History, Stockholm, Sweden, under catalogue number NRM 20100076.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Ladenberger, Anna, et al.
(författare)
-
CO2 fluid inclusions in mantle xenoliths from Lower Silesia (SW Poland) : formation conditions and decompression history
- 2009
-
Ingår i: European journal of mineralogy. - : Schweizerbart. - 0935-1221 .- 1617-4011. ; 21:4, s. 751-761
-
Tidskriftsartikel (refereegranskat)abstract
- Raman spectroscopy has been applied to determine the density and pressure of formation of CO2 fluid inclusions in mantle xenoliths, carried to the surface at Wilcza Gora in southwestern Poland by early Miocene alkaline magmas. The magmas were generated by partial melting in the transition zone between the spinel and garnet stability fields. Determination of the densities of CO2 inclusions allows calculation of the partial pressures and reconstruction of the depth of xenolith origin as well as their history en route to the surface. The density of CO2 inclusions ranges from 0.06 to 1.10 g/cm(3) in olivines and 0.17 to 1.11 g/cm(3) in orthopyroxenes. Only inclusions with a density above 0.8 g/cm(3) reflect lower crust (ca. 15-30 km) and upper mantle (ca. 30-38 km) conditions. Slight differences in density of the inclusions between olivines and orthopyroxenes can be attributed to their different theological properties during magma ascent. Modelling of pressure and depth within the temperature range in which the xenoliths equilibrated with the magmas yields information about the complex eruption history of basanitic volcanoes. Our estimates are consistent with seismic data that show a regional high-velocity layer at the Moho (ca. 30-35 km deep) with p-wave velocities up to 8 km/s which have been attributed to mafic and ultramafic lithologies.
|
|
| 10. |
- Perdikouri, Christina, et al.
(författare)
-
Hydrothermal replacement of Aragonite by Calcite : interplay between replacement, fracturing and growth
- 2013
-
Ingår i: European journal of mineralogy. - : Schweizerbart. - 0935-1221 .- 1617-4011. ; 25:2, s. 123-136
-
Tidskriftsartikel (refereegranskat)abstract
- The hydrothermal transformation of single aragonite crystals into polycrystalline calcite has been studied under hydrothermal conditions. The transformation involves a fluid-mediated replacement reaction, associated with fracturing of the initial aragonite crystal and growth of calcite throughout various parts of the reacted aragonite. The observed overall preservation of the crystal morphology is typical of an interface-coupled dissolution-reprecipitation mechanism Analysis of the crystallographic orientation of the product calcite using electron backscatter diffraction (EBSD) showed little to no link between the two phases under the studied conditions, with calcite crystallites exhibiting dominantly different crystallographic orientations compared to those of the aragonite and of neighbouring calcite domains. The complexity of the observed textures is mainly a result of the combination of fracturing of the crystal and initiation of nucleation and growth at different points of the exposed aragonite surface. Experiments performed with solutions enriched in O-18 as a tracer for oxygen exchange and monitored by Raman spectroscopy, showed that carbonate ions in the starting solution are mixed with carbonate from the dissolving aragonite, resulting in an O-18 concentration in the product calcite which depended on the local fluid transport through the fractures. As replacement processes among the CaCO3 phases are relevant to a wide range of applications, understanding the mechanisms is essential for the interpretation of observations of natural and/or experimental samples. This study describes the interplay between the replacement process, the fracturing of the crystal and growth of the new phase, calcite, and provides new insights into the mechanism of the aragonite to calcite transition. The combination of the two methods, EBSD and Raman spectroscopy, demonstrates the importance of local fluid composition and transport pathways in determining the isotope and element exchange in mineral replacement reactions.
|
|
