| 1. |
- Ablikim, M., et al.
(författare)
-
Measurements of (XcJ)-> K+K-K+K- decays
- 2006
-
Ingår i: Physics Letters B. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 642:3, s. 197-202
-
Tidskriftsartikel (refereegranskat)abstract
- Using 14M psi(2S) events taken with the BESII detector, chi(cJ) -> 2(K+K-) decays are studied. For the four-kaon final state, the branching fractions are B(chi(c0,1,2) ->.2(K+K-)) = (3.48 +/- 0.23 +/- 0.47) x 10(-3), (0.70 +/- 0.13 +/- 0.10) x 10(-3), and (2.17 +/- 0.20 +/- 0.31) x 10(-3). For the phi K+K- final state, the branching fractions, which are measured for the first time, are B(chi(c0,1,2) -> phi K+K-) = (1.03 +/- 0.22 +/- 0.15) x 10(-3), (0.46 +/- 0.16 +/- 0.06) x 10(-3), and (1.67 +/- 0.26 +/- 0.24) x 10(-4). For the phi phi final state, B(chi(c0,2) -> phi phi) = (0.94 +/- 0.21 +/- 0.13) x 10(-3) and (1.70 +/- 0.30 +/- 0.25) x 10(-3).
|
|
| 2. |
- Schael, S, et al.
(författare)
-
Precision electroweak measurements on the Z resonance
- 2006
-
Ingår i: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 427:5-6, s. 257-454
-
Forskningsöversikt (refereegranskat)abstract
- We report on the final electroweak measurements performed with data taken at the Z resonance by the experiments operating at the electron-positron colliders SLC and LEP. The data consist of 17 million Z decays accumulated by the ALEPH, DELPHI, L3 and OPAL experiments at LEP, and 600 thousand Z decays by the SLID experiment using a polarised beam at SLC. The measurements include cross-sections, forward-backward asymmetries and polarised asymmetries. The mass and width of the Z boson, m(Z) and Gamma(Z), and its couplings to fermions, for example the p parameter and the effective electroweak mixing angle for leptons, are precisely measured: m(Z) = 91.1875 +/- 0.0021 GeV, Gamma(Z) = 2.4952 +/- 0.0023 GeV, rho(l) = 1.0050 +/- 0.0010, sin(2)theta(eff)(lept) = 0.23153 +/- 0.00016. The number of light neutrino species is determined to be 2.9840 +/- 0.0082, in agreement with the three observed generations of fundamental fermions. The results are compared to the predictions of the Standard Model (SM). At the Z-pole, electroweak radiative corrections beyond the running of the QED and QCD coupling constants are observed with a significance of five standard deviations, and in agreement with the Standard Model. Of the many Z-pole measurements, the forward-backward asymmetry in b-quark production shows the largest difference with respect to its SM expectation, at the level of 2.8 standard deviations. Through radiative corrections evaluated in the framework of the Standard Model, the Z-pole data are also used to predict the mass of the top quark, m(t) = 173(+10)(+13) GeV, and the mass of the W boson, m(W) = 80.363 +/- 0.032 GeV. These indirect constraints are compared to the direct measurements, providing a stringent test of the SM. Using in addition the direct measurements of m(t) and m(W), the mass of the as yet unobserved SM Higgs boson is predicted with a relative uncertainty of about 50% and found to be less than 285 GeV at 95% confidence level. (c) 2006 Elsevier B.V. All rights reserved.
|
|
| 3. |
- Abbasi, R., et al.
(författare)
-
The IceCube data acquisition system : Signal capture, digitization, and timestamping
- 2009
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 601:3, s. 294-316
-
Tidskriftsartikel (refereegranskat)abstract
- IceCube is a km-scale neutrino observatory under construction at the South Pole with sensors both in the deep ice (InIce) and on the surface (IceTop). The sensors, called Digital Optical Modules (DOMs). detect, digitize and timestamp the signals from optical Cherenkov-radiation photons. The DOM Main Board (MB) data acquisition subsystem is connected to the central DAQ in the IceCube Laboratory (ICL) by a single twisted copper wire-pair and transmits packetized data on demand. Time calibration is maintained throughout the array by regular transmission to the DOMs of precisely timed analog signals, synchronized to a central GPS-disciplined clock. The design goals and consequent features, functional capabilities, and initial performance of the DOM MB, and the operation of a combined array of DOMs as a system, are described here. Experience with the first InIce strings and the IceTop stations indicates that the system design and performance goals have been achieved. (c) 2009 Elsevier B.V. All rights reserved.
|
|
| 4. |
- Elsik, Christine G., et al.
(författare)
-
The Genome Sequence of Taurine Cattle : A Window to Ruminant Biology and Evolution
- 2009
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 324:5926, s. 522-528
-
Tidskriftsartikel (refereegranskat)abstract
- To understand the biology and evolution of ruminants, the cattle genome was sequenced to about sevenfold coverage. The cattle genome contains a minimum of 22,000 genes, with a core set of 14,345 orthologs shared among seven mammalian species of which 1217 are absent or undetected in noneutherian (marsupial or monotreme) genomes. Cattle-specific evolutionary breakpoint regions in chromosomes have a higher density of segmental duplications, enrichment of repetitive elements, and species-specific variations in genes associated with lactation and immune responsiveness. Genes involved in metabolism are generally highly conserved, although five metabolic genes are deleted or extensively diverged from their human orthologs. The cattle genome sequence thus provides a resource for understanding mammalian evolution and accelerating livestock genetic improvement for milk and meat production.
|
|
| 5. |
- Hou, Yuanyuan, et al.
(författare)
-
Pressure-induced polymerization of nano- and submicrometer C60 rods into a rhombohedral phase
- 2006
-
Ingår i: Chemical Physics Letters. - : Elsevier BV. - 0009-2614. ; 423:1-3, s. 215-219
-
Tidskriftsartikel (refereegranskat)abstract
- C-60 rods with nano- and submicrometer dimensions were polymerized at 4.5 GPa and 973 K. Raman spectroscopy showed that the material transformed into a rhombohedral polymeric structure under high pressure and high temperature (HPHT) conditions. The HPHT polymerized samples keep the original rod shape. The position dependence of photoluminescence (PL) spectra have been studied on the rhombohedral polymer C60 rods at room temperature. The intensity of the 1.74 eV peak from the rhombohedral phase varies systematically between the edge of and the middle of the rod. Our results indicate that the 1.74 eV peak originates from surface defects.
|
|
| 6. |
|
|
| 7. |
- Wang, Wei-Zhou, et al.
(författare)
-
Comparative analysis of gene expression profiles between the normal human cartilage and the one with endemic osteoarthritis.
- 2009
-
Ingår i: Osteoarthritis and Cartilage. - : Saunders Elsevier. - 1063-4584 .- 1522-9653. ; 17:1, s. 83-90
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVE: To investigate the differences in gene expression profiles of adult articular cartilage with endemic osteoarthritis (OA), Kashin-Beck disease (KBD), and the same regions in the normal joint.METHODS: The messenger RNA expression profiles of articular cartilage with KBD diagnosed according to "Diagnosing Criteria of Kashin-Beck Disease in China" were compared with the normal cartilage. Total RNA isolated separately from four pairs of the KBD and normal cartilage samples were evaluated by oligonucleotide microarray analysis. The microarray data were confirmed by quantitative real-time reverse transcription polymerase chain reaction (qRT-PCR) amplification and were compared with previously published experiments.RESULTS: About 4100 transcripts, which corresponded to 35% of the expressed transcripts, showed >or=twofold differences in expression between the cartilage tissues in pairs. Approximately 2% of the expressed genes (79, 55 genes expressed in KBD>normal; 24 genes expressed in KBDCONCLUSION: Differences between KBD cartilage and the normal exhibited a similar pattern among the four pairs examined, indicating the presence of common mechanisms mainly including chondrocyte metabolism and apoptosis that contribute to cartilage destruction in KBD.
|
|
| 8. |
- Yu, G., et al.
(författare)
-
Structures, electronic states, photoluminescence, and carrier transport properties of 1,1-disubstituted 2,3,4,5-tetraphenylsiloles
- 2005
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 127:17, s. 6335-6346
-
Forskningsöversikt (refereegranskat)abstract
- The excellent electroluminescent (EL) properties of 1,1-disubstituted 2,3,4,5-tetraphenylsiloles, 1-methyl-1,2,3,4,5-pentaphenylsilole (MPPS), and 1,1,2,3,4,5-hexaphenylsilole (HPS) have been found. Despite some studies devoted to these materials, very little is known about the real origin of their unique EL properties. Therefore, we investigated the structures, photoluminescence (PL), and charge carrier transport properties of 1,1-disubstituted 2,3,4,5-tetraphenylsiloles as well as the effect of substituents on these characteristics. The single crystals of the three siloles involving 1,1-dimethyl-2,3,4,5-tetraphenylsilole (DMTPS), MPPS, and HIPS were grown and their crystal structures were determined by X-ray diffraction. Three siloles have nonplanar molecular structures. The substituents at 1,1-positions enhance the steric hindrance and have predominant influence on the twisted degree of phenyl groups at ring carbons. This nonplanar structure reduces the intermolecular interaction and the likelihood of excimer formation, and increases PL efficiency in the solid state. The silole films show high fluorescence quantum yields (75-85%), whereas their dilute solutions exhibit a faint emission. The electronic structures of the three siloles were investigated using quantum chemical calculations. The highest occupied molecular orbitals (HOMOs) and the lowest unoccupied molecular orbitals (LUMOs) are mainly localized on the silole ring and two phenyl groups at 2,5-positions in all cases, while the LUMOs have a significant orbital density at two exocyclic Si-C bonds. The extremely theoretical studies of luminescent properties were carried out. We calculated the nonradiative decay rate of the first excited state as well as the radiative one. It is found that the faint emission of DMTPS in solutions mainly results from the huge nonradiative decay rate. In solid states, molecular packing can remarkably restrict the intramolecular rotation of the peripheral side phenyl ring, which has a large contribution to the nonradiative transition process. This explains why the 1,1-disubstituted 2,3,4,5-tetraphenylsiloles in the thin films exhibit high fluorescence quantum yields. The charge carrier mobilities of the MPPS and HPS films were measured using a transient EL technique. We obtained a mobility of 2.1 x 10(-6) cm(2)/V(.)s in the MPPS film at an electric field of 1.2 x 10(6) V/cm. This mobility is comparable to that of Alq(3), which is one of the most extensively used electron transport materials in organic light-emitting diodes (LEDs), at the same electric field. The electron mobility of the HPS film is about similar to 1.5 times higher than that of the MPPS film. To the best of our knowledge, this kind of material is one of the most excellent emissive materials that possess both high charge carrier mobility and high PL efficiency in the solid states simultaneously. The excellent EL performances of MPPS and HPS are presumably ascribed to these characteristics.
|
|
| 9. |
- Zhang, Fengling, et al.
(författare)
-
Ordered mesoporous Ag-TiO2-KIT-6 heterostructure: synthesis, characterization and photocatalysis
- 2009
-
Ingår i: Journal of Materials Chemistry. - : Royal Society of Chemistry (RSC). - 1364-5501 .- 0959-9428. ; 19:18, s. 2771-2777
-
Tidskriftsartikel (refereegranskat)abstract
- Ordered mesoporous Ag-TiO2-KIT-6 heterostructured nanocrystals were successfully synthesized by a template-based method, where a layer of TiO2 and Ag2O nanoparticles were deposited on cubic (Ia3d) silica (KIT-6) in an orderly manner; at the same time, the formed Ag2O nanoparticles were photolyzed to metallic Ag nanoparticles. Our results show that Ag-TiO2-KIT-6 is an ordered mesoporous composite material, which is composed of Ag-TiO2 heterostructures and the amorphous KIT-6 template. In addition, Ag-TiO2-KIT-6 possesses the highest photocatalytic activity among the as-synthesized photocatalysts, which can be attributed to the Ag-TiO2 heterojunctions and the excellent texture: (1) Ag-TiO2 heterojunctions improve the separation of photogenerated electron-hole pairs due to the potential energy differences between Ag and TiO2 nanocrystals, thus enhancing the photocatalytic activity; (2) the Ag-TiO2-KIT-6 sample possesses a high BET surface area and a large number of ordered pore channels, which facilitate adsorption and transportation of dye molecules, also leading to higher photocatalytic activity. It was also found that the Ag-TiO2 heterostructure plays a more important role in enhancing the photocatalytic activity than high BET surface area.
|
|
| 10. |
- Zheng, L. R., et al.
(författare)
-
Network Structured SnO2/ZnO Heterojunction Nanocatalyst with High Photocatalytic Activity
- 2009
-
Ingår i: Inorganic Chemistry. - : American Chemical Society (ACS). - 0020-1669 .- 1520-510X. ; 48:5, s. 1819-1825
-
Tidskriftsartikel (refereegranskat)abstract
- A network-structured SnO2/ZnO heterojunction nanocatalyst with high photocatalytic activity was successfully synthesized through a simple two-step solvothermal method. The as-synthesized samples are characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, scanning electron microscopy, N-2 physical adsorption, and UV-vis spectroscopy. The results show that the SnO2/ZnO sample with a molar ratio of Sn/Zn = 1 is a mesoporous composite material composed of SnO2 and ZnO. The photocatalytic activity of SnO2/ZnO heterojunction nanocatalysts for the degradation of methyl orange is much higher than those of solvothermally synthesized SnO2 and ZnO samples, which can be attributed to the SnO2-ZnO heterojunction, the pore structure, and higher Brunauer-Emmeff-Teller (BET) surface area of the sample: (1) The SnO2-ZnO heterojunction improves the separation of photogenerated electron-hole pairs due to the potential energy differences between SnO2 and ZnO, thus enhancing the photocatalytic activity. (2) The SnO2/ZnO sample might possess more surface reaction sites and adsorb and transport more dye molecules due to the higher BET surface area and many pore channels, also leading to higher photocatalytic activity.
|
|
