| 1. |
|
|
| 2. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 3. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 4. |
- Joffrin, E., et al.
(författare)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
| 5. |
|
|
| 6. |
- Li, Youbing, et al.
(författare)
-
Single-Atom-Thick Active Layers Realized in Nanolaminated Ti-3(AlxCu1-x)C-2 and Its Artificial Enzyme Behavior
- 2019
-
Ingår i: ACS Nano. - : AMER CHEMICAL SOC. - 1936-0851 .- 1936-086X. ; 13:8, s. 9198-9205
-
Tidskriftsartikel (refereegranskat)abstract
- A Ti-3(AlxCu1-x)C-2 phase with Cu atoms with a degree of ordering in the A plane is synthesized through the A site replacement reaction in CuCl2 molten salt. The weakly bonded single -atom -thick Cu layers in a Ti-3(AlxCu1-x)C-2 MAX phase provide actives sites for catalysis chemistry. As -synthesized Ti-3(AlxCu1-x)C-2 presents unusual peroxidase-like catalytic activity similar to that of natural enzymes. A fabricated Ti-3(AlxCu1-x)C-2/chitosan/glassy carbon electrode biosensor prototype also exhibits a low detection limit in the electrochemical sensing of H2O2. These results have broad implications for property tailoring in a nanolaminated MAX phase by replacing the A site with late transition elements.
|
|
| 7. |
- Yang, Qixing, et al.
(författare)
-
Briquette Smelting in Electric Arc Furnace to Recycle Wastes from Stainless Steel Production
- 2015
-
Ingår i: Journal of Iron and Steel Research International. - 1006-706X .- 2210-3988. ; 22:Suppl. 1, s. 10-16
-
Tidskriftsartikel (refereegranskat)abstract
- Wastes from stainless steel production were briquetted together with carbon for smelt-reduction in the electric arc furnace, EAF, to achieve an internal recycling. A laboratory induction furnace was used to simulate the EAF. With a close simulation of the smelting, disintegration of the briquettes heated under load and recovery of metals from briquettes melted together with stainless steel and slag former were investigated. The influences of test conditions on carbon reduction of oxides in the briquettes were also examined. The briquettes endured heating at 1 186 °C under load of 3.5 kg and could be charged to the melt in small quantity without causing serious splashing. For a high metal recovery, it was necessary to charge the briquettes together with slag former. Small local zones of smelt-reduction with high carbon concentration could thus be formed during the charger heating. Silicon content in the metal near to the briquettes should be minimised to achieve a high degree of carbon reduction. Based on results obtained from this study, suggestions were made on smooth operations of smelt-reduction of the briquettes by using EAF or induction furnace with large scales.
|
|
| 8. |
- Andrews, Jennifer E., et al.
(författare)
-
SN 2017gmr : An Energetic Type II-P Supernova with Asymmetries
- 2019
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 0004-637X .- 1538-4357. ; 885:1
-
Tidskriftsartikel (refereegranskat)abstract
- We present high-cadence UV, optical, and near-infrared data on the luminous Type II-P supernova SN;2017gmr from hours after discovery through the first 180 days. SN;2017gmr does not show signs of narrow, high-ionization emission lines in the early optical spectra, yet the optical light-curve evolution suggests that an extra energy source from circumstellar medium (CSM) interaction must be present for at least 2 days after explosion. Modeling of the early light curve indicates a ?500 R progenitor radius, consistent with a rather compact red supergiant, and late-time luminosities indicate that up to 0.130;;0.026 M of Ni-56 are present, if the light curve is solely powered by radioactive decay, although the Ni-56 mass may be lower if CSM interaction contributes to the post-plateau luminosity. Prominent multipeaked emission lines of H? and [O i] emerge after day 154, as a result of either an asymmetric explosion or asymmetries in the CSM. The lack of narrow lines within the first 2 days of explosion in the likely presence of CSM interaction may be an example of close, dense, asymmetric CSM that is quickly enveloped by the spherical supernova ejecta.
|
|
| 9. |
- Li, Liang, et al.
(författare)
-
A CORRELATED STUDY OF OPTICAL AND X-RAY AFTERGLOWS OF GRBs
- 2015
-
Ingår i: Astrophysical Journal. - 0004-637X .- 1538-4357. ; 805:1
-
Tidskriftsartikel (refereegranskat)abstract
- We study an extensive sample of 87 gamma-ray bursts (GRBs) for which there are well-sampled and simultaneous optical and X-ray light curves. We extract the cleanest possible signal of the afterglow component. and compare the temporal behaviors of the X-ray light. curve, observed by Swift XRT, and optical data, observed by UVOT and ground-based telescopes for each individual burst. Overall we find that 62% of the GRBs. are consistent with the standard afterglow model. When more advanced modeling is invoked, up to 91% of the bursts in our sample may be consistent with the external-shock model. A large fraction of these bursts are consistent with occurring in a constant interstellar density medium (61%) while only 39% of them occur in a wind-like medium. Only nine cases have afterglow light curves that exactly match the standard fireball model prediction, having a single power-law decay in both energy bands that are observed during their entire duration. In particular, for the bursts with chromatic behavior, additional model assumptions must be made over limited segments of the light curves in order for these bursts to fully agree with the external-shock model. Interestingly, for 54% of the X-ray and 40% of the optical band observations, the end of the shallow decay (t(similar to-0.5)) period coincides with the jet-break (t(similar to-p)) time, causing an abrupt change in decay slope. The fraction of the burst that is consistent with the external-shock model is independent of the observational epochs in the rest frame of GRBs. Moreover, no cases can be explained by the cooling frequency crossing the X-ray or optical band.
|
|
| 10. |
- Liu, Jun, et al.
(författare)
-
Microbial community structure and function in sediments from e-waste contaminated rivers at Guiyu area of China
- 2018
-
Ingår i: Environmental Pollution. - : Elsevier BV. - 0269-7491. ; 235, s. 171-179
-
Tidskriftsartikel (refereegranskat)abstract
- The release of toxic organic pollutants and heavy metals by primitive electronic waste (e-waste) processing to waterways has raised significant concerns, but little is known about their potential ecological effects on aquatic biota especially microorganisms. We characterized the microbial community composition and diversity in sediments sampled along two rivers consistently polluted by e-waste, and explored how community functions may respond to the complex combined pollution. High-throughput 16S rRNA gene sequencing showed that Proteobacteria (particularly Deltaproteobacteria) dominated the sediment microbial assemblages followed by Bacteroidetes, Acidobacteria, Chloroflexi and Firmicutes. PICRUSt metagenome inference provided an initial insight into the metabolic potentials of these e-waste affected communities, speculating that organic pollutants degradation in the sediment might be mainly performed by some of the dominant genera (such as Sulfuricurvum, Thiobacillus and Burkholderia) detected in situ. Statistical analyses revealed that toxic organic compounds contributed more to the observed variations in sediment microbial community structure and predicted functions (24.68% and 8.89%, respectively) than heavy metals (12.18% and 4.68%), and Benzo(a)pyrene, bioavailable lead and electrical conductivity were the key contributors. These results have shed light on the microbial assemblages in e-waste contaminated river sediments, indicating a potential influence of e-waste pollution on the microbial community structure and function in aquatic ecosystems.
|
|
