| 1. |
|
|
| 2. |
- Hyde, K. D., et al.
(författare)
-
Global consortium for the classification of fungi and fungus-like taxa
- 2023
-
Ingår i: MYCOSPHERE. - : Mushroom Research Foundation. - 2077-7000 .- 2077-7019. ; 14:1, s. 1960-2012
-
Tidskriftsartikel (refereegranskat)abstract
- The Global Consortium for the Classification of Fungi and fungus-like taxa is an international initiative of more than 550 mycologists to develop an electronic structure for the classification of these organisms. The members of the Consortium originate from 55 countries/regions worldwide, from a wide range of disciplines, and include senior, mid-career and early-career mycologists and plant pathologists. The Consortium will publish a biannual update of the Outline of Fungi and fungus-like taxa, to act as an international scheme for other scientists. Notes on all newly published taxa at or above the level of species will be prepared and published online on the Outline of Fungi website (https://www.outlineoffungi.org/), and these will be finally published in the biannual edition of the Outline of Fungi and fungus-like taxa. Comments on recent important taxonomic opinions on controversial topics will be included in the biannual outline. For example, 'to promote a more stable taxonomy in Fusarium given the divergences over its generic delimitation', or 'are there too many genera in the Boletales?' and even more importantly, 'what should be done with the tremendously diverse 'dark fungal taxa?' There are undeniable differences in mycologists' perceptions and opinions regarding species classification as well as the establishment of new species. Given the pluralistic nature of fungal taxonomy and its implications for species concepts and the nature of species, this consortium aims to provide a platform to better refine and stabilise fungal classification, taking into consideration views from different parties. In the future, a confidential voting system will be set up to gauge the opinions of all mycologists in the Consortium on important topics. The results of such surveys will be presented to the International Commission on the Taxonomy of Fungi (ICTF) and the Nomenclature Committee for Fungi (NCF) with opinions and percentages of votes for and against. Criticisms based on scientific evidence with regards to nomenclature, classifications, and taxonomic concepts will be welcomed, and any recommendations on specific taxonomic issues will also be encouraged; however, we will encourage professionally and ethically responsible criticisms of others' work. This biannual ongoing project will provide an outlet for advances in various topics of fungal classification, nomenclature, and taxonomic concepts and lead to a community-agreed classification scheme for the fungi and fungus-like taxa. Interested parties should contact the lead author if they would like to be involved in future outlines.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Jacobsson, Jesper, 1984-, et al.
(författare)
-
An open-access database and analysis tool for perovskite solar cells based on the FAIR data principles
- 2022
-
Ingår i: Nature Energy. - : Springer Nature. - 2058-7546. ; 7:1, s. 107-115
-
Tidskriftsartikel (refereegranskat)abstract
- Large datasets are now ubiquitous as technology enables higher-throughput experiments, but rarely can a research field truly benefit from the research data generated due to inconsistent formatting, undocumented storage or improper dissemination. Here we extract all the meaningful device data from peer-reviewed papers on metal-halide perovskite solar cells published so far and make them available in a database. We collect data from over 42,400 photovoltaic devices with up to 100 parameters per device. We then develop open-source and accessible procedures to analyse the data, providing examples of insights that can be gleaned from the analysis of a large dataset. The database, graphics and analysis tools are made available to the community and will continue to evolve as an open-source initiative. This approach of extensively capturing the progress of an entire field, including sorting, interactive exploration and graphical representation of the data, will be applicable to many fields in materials science, engineering and biosciences.
|
|
| 6. |
- Akiyama, Kazunori, et al.
(författare)
-
The persistent shadow of the supermassive black hole of M 87: I. Observations, calibration, imaging, and analysis*
- 2024
-
Ingår i: Astronomy and Astrophysics. - 0004-6361 .- 1432-0746. ; 681
-
Tidskriftsartikel (refereegranskat)abstract
- In April 2019, the Event Horizon Telescope (EHT) Collaboration reported the first-ever event-horizon-scale images of a black hole, resolving the central compact radio source in the giant elliptical galaxy M 87. These images reveal a ring with a southerly brightness distribution and a diameter of ∼42 μas, consistent with the predicted size and shape of a shadow produced by the gravitationally lensed emission around a supermassive black hole. These results were obtained as part of the April 2017 EHT observation campaign, using a global very long baseline interferometric radio array operating at a wavelength of 1.3 mm. Here, we present results based on the second EHT observing campaign, taking place in April 2018 with an improved array, wider frequency coverage, and increased bandwidth. In particular, the additional baselines provided by the Greenland telescope improved the coverage of the array. Multiyear EHT observations provide independent snapshots of the horizon-scale emission, allowing us to confirm the persistence, size, and shape of the black hole shadow, and constrain the intrinsic structural variability of the accretion flow. We have confirmed the presence of an asymmetric ring structure, brighter in the southwest, with a median diameter of 43.3-3.1+1.5 μas. The diameter of the 2018 ring is remarkably consistent with the diameter obtained from the previous 2017 observations. On the other hand, the position angle of the brightness asymmetry in 2018 is shifted by about 30 relative to 2017. The perennial persistence of the ring and its diameter robustly support the interpretation that the ring is formed by lensed emission surrounding a Kerr black hole with a mass ∼6.5× 109M. The significant change in the ring brightness asymmetry implies a spin axis that is more consistent with the position angle of the large-scale jet.
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Ramirez, Jesus., et al.
(författare)
-
Effect of solution annealing temperature on the localised corrosion behaviour of a modified super austenitic steel produced in an open-air atmosphere
- 2023
-
Ingår i: Materials Chemistry and Physics. - : Elsevier BV. - 0254-0584 .- 1879-3312. ; 299
-
Tidskriftsartikel (refereegranskat)abstract
- Two annealing heat treatments were investigated regarding localised corrosion behaviour on Nb and Mn-bearing super austenitic stainless steel. The material was designed based on physical metallurgical principles supported by Thermo-Calc modelling and was produced in an open-air atmosphere based on pre-sorted SS scrap plus ferroalloys elements. The production method aims for metal waste valorisation considering small foundries without an atmosphere-controlled process. Secondary phases at annealing temperatures were experimentally analysed by different microstructural characterisation methods and correlated by the Thermo-Calc modelling. In addition, electrochemical techniques and SKPFM were used to study the relationship between observed phases and localised corrosion performance. As the main results, a good correlation was observed between Thermo-Calc calculations and the microstructural characterisation. In particular, M23C6 carbides, sigma phase, and Nb-MX were identified for the sample treated at 1120 degrees C, while for the sample treated at 1180 degrees C, sigma phase and Nb-MX were identified, no M23C6 were detected. As regards localised corrosion behaviour, the M23C6 carbides and a phase for sample 1120 degrees C generated Cr and Mo depletion zones and diminished the corrosion resistance in corrosive aqueous solutions. In the case of sample 1180 degrees C, the a-phase with a smaller size and volume fraction than sample 1120 degrees C was observed, leading to a more uniform Cr and Mo distribution through the microstructure, obtaining high corrosion resistance and showing promising corrosion behaviour, similar to commercial SS 254smo considering its production in open-air.
|
|
| 10. |
- Keller, P. S., et al.
(författare)
-
Global CO2 emissions from dry inland waters share common drivers across ecosystems
- 2020
-
Ingår i: Nature Communications. - : Nature Publishing Group. - 2041-1723. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- Many inland waters exhibit complete or partial desiccation, or have vanished due to global change, exposing sediments to the atmosphere. Yet, data on carbon dioxide (CO2) emissions from these sediments are too scarce to upscale emissions for global estimates or to understand their fundamental drivers. Here, we present the results of a global survey covering 196 dry inland waters across diverse ecosystem types and climate zones. We show that their CO2 emissions share fundamental drivers and constitute a substantial fraction of the carbon cycled by inland waters. CO2 emissions were consistent across ecosystem types and climate zones, with local characteristics explaining much of the variability. Accounting for such emissions increases global estimates of carbon emissions from inland waters by 6% (~0.12 Pg C y−1). Our results indicate that emissions from dry inland waters represent a significant and likely increasing component of the inland waters carbon cycle.
|
|
