| 1. |
- Schael, S, et al.
(författare)
-
Precision electroweak measurements on the Z resonance
- 2006
-
Ingår i: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 427:5-6, s. 257-454
-
Forskningsöversikt (refereegranskat)abstract
- We report on the final electroweak measurements performed with data taken at the Z resonance by the experiments operating at the electron-positron colliders SLC and LEP. The data consist of 17 million Z decays accumulated by the ALEPH, DELPHI, L3 and OPAL experiments at LEP, and 600 thousand Z decays by the SLID experiment using a polarised beam at SLC. The measurements include cross-sections, forward-backward asymmetries and polarised asymmetries. The mass and width of the Z boson, m(Z) and Gamma(Z), and its couplings to fermions, for example the p parameter and the effective electroweak mixing angle for leptons, are precisely measured: m(Z) = 91.1875 +/- 0.0021 GeV, Gamma(Z) = 2.4952 +/- 0.0023 GeV, rho(l) = 1.0050 +/- 0.0010, sin(2)theta(eff)(lept) = 0.23153 +/- 0.00016. The number of light neutrino species is determined to be 2.9840 +/- 0.0082, in agreement with the three observed generations of fundamental fermions. The results are compared to the predictions of the Standard Model (SM). At the Z-pole, electroweak radiative corrections beyond the running of the QED and QCD coupling constants are observed with a significance of five standard deviations, and in agreement with the Standard Model. Of the many Z-pole measurements, the forward-backward asymmetry in b-quark production shows the largest difference with respect to its SM expectation, at the level of 2.8 standard deviations. Through radiative corrections evaluated in the framework of the Standard Model, the Z-pole data are also used to predict the mass of the top quark, m(t) = 173(+10)(+13) GeV, and the mass of the W boson, m(W) = 80.363 +/- 0.032 GeV. These indirect constraints are compared to the direct measurements, providing a stringent test of the SM. Using in addition the direct measurements of m(t) and m(W), the mass of the as yet unobserved SM Higgs boson is predicted with a relative uncertainty of about 50% and found to be less than 285 GeV at 95% confidence level. (c) 2006 Elsevier B.V. All rights reserved.
|
|
| 2. |
- Ackermann, M., et al.
(författare)
-
Search for ultra-high-energy neutrinos with amanda-II
- 2008
-
Ingår i: Astrophysical Journal. - 0004-637X .- 1538-4357. ; 675:2, s. 1014-1024
-
Tidskriftsartikel (refereegranskat)abstract
- A search for diffuse neutrinos with energies in excess of 10(5) GeV is conducted with AMANDA-II data recorded between 2000 and 2002. Above 10(7) GeV, the Earth is essentially opaque to neutrinos. This fact, combined with the limited overburden of the AMANDA-II detector ( roughly 1.5 km), concentrates these ultra-high-energy neutrinos at the horizon. The primary background for this analysis is bundles of downgoing, high-energy muons from the interaction of cosmic rays in the atmosphere. No statistically significant excess above the expected background is seen in the data, and an upper limit is set on the diffuse all-flavor neutrino flux of E-2 Phi(90%CL) < 2.7x10(-7) GeV cm(-2) s(-1) sr(-1) valid over the energy range of 2x10(5) to 10(9) GeV. A number of models that predict neutrino fluxes from active galactic nuclei are excluded at the 90% confidence level.
|
|
| 3. |
- Abbasi, R., et al.
(författare)
-
Solar energetic particle spectrum on 2006 December 13 determined by IceTop
- 2008
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 0004-637X .- 1538-4357. ; 689:1, s. L65-L68
-
Tidskriftsartikel (refereegranskat)abstract
- On 2006 December 13 the IceTop air shower array at the South Pole detected a major solar particle event. By numerically simulating the response of the IceTop tanks, which are thick Cerenkov detectors with multiple thresholds deployed at high altitude with no geomagnetic cutoff, we determined the particle energy spectrum in the energy range 0.6-7.6 GeV. This is the first such spectral measurement using a single instrument with a well-defined viewing direction. We compare the IceTop spectrum and its time evolution with previously published results and outline plans for improved resolution of future solar particle spectra.
|
|
| 4. |
- Abbasi, R., et al.
(författare)
-
The IceCube data acquisition system : Signal capture, digitization, and timestamping
- 2009
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 601:3, s. 294-316
-
Tidskriftsartikel (refereegranskat)abstract
- IceCube is a km-scale neutrino observatory under construction at the South Pole with sensors both in the deep ice (InIce) and on the surface (IceTop). The sensors, called Digital Optical Modules (DOMs). detect, digitize and timestamp the signals from optical Cherenkov-radiation photons. The DOM Main Board (MB) data acquisition subsystem is connected to the central DAQ in the IceCube Laboratory (ICL) by a single twisted copper wire-pair and transmits packetized data on demand. Time calibration is maintained throughout the array by regular transmission to the DOMs of precisely timed analog signals, synchronized to a central GPS-disciplined clock. The design goals and consequent features, functional capabilities, and initial performance of the DOM MB, and the operation of a combined array of DOMs as a system, are described here. Experience with the first InIce strings and the IceTop stations indicates that the system design and performance goals have been achieved. (c) 2009 Elsevier B.V. All rights reserved.
|
|
| 5. |
- Armesto, N., et al.
(författare)
-
Heavy-ion collisions at the LHC-Last call for predictions
- 2008
-
Ingår i: Journal of Physics G. - : IOP Publishing. - 0954-3899 .- 1361-6471. ; 35:5, s. 054001-
-
Forskningsöversikt (refereegranskat)abstract
- This writeup is a compilation of the predictions for the forthcoming Heavy Ion Program at the Large Hadron Collider, as presented at the CERN Theory Institute 'Heavy Ion Collisions at the LHC - Last Call for Predictions', held from 14th May to 10th June 2007.
|
|
| 6. |
- Abbasi, R., et al.
(författare)
-
Search for point sources of high energy neutrinos with final data from AMANDA-II
- 2009
-
Ingår i: Physical Review D. - 1550-7998 .- 1550-2368. ; 79, s. 062001-
-
Tidskriftsartikel (refereegranskat)abstract
- We present a search for point sources of high energy neutrinos using 3.8 yr of data recorded by AMANDA-II during 2000-2006. After reconstructing muon tracks and applying selection criteria designed to optimally retain neutrino-induced events originating in the northern sky, we arrive at a sample of 6595 candidate events, predominantly from atmospheric neutrinos with primary energy 100 GeV to 8 TeV. Our search of this sample reveals no indications of a neutrino point source. We place the most stringent limits to date on E(-2) neutrino fluxes from points in the northern sky, with an average upper limit of E(2)Phi(nu mu)+nu(tau)<= 5.2x10(-11) TeV cm(-2) s(-1) on the sum of nu(mu) and nu(tau) fluxes, assumed equal, over the energy range from 1.9 TeV to 2.5 PeV.
|
|
| 7. |
|
|
| 8. |
- Andrinopoulos, Nikos, et al.
(författare)
-
Design And Testing Of A Vibrating Test Object For Investigating Fluid-Structure Interaction
- 2008
-
Ingår i: PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 5, PT A. - NEW YORK : AMER SOC MECHANICAL ENGINEERS. - 9780791843154 ; , s. 415-424
-
Konferensbidrag (refereegranskat)abstract
- In this study the vibration properties of a deforming test object are presented. The test object is bump shaped and is integrated into the wall of a transonic wind tunnel. The purpose for using such a test object is to study, in a generic manner, the unsteady aerodynamic phenomena occurring due to the presence of a vibrating structure in the flow. The setup is part of an ongoing study to address the phenomena of fluid-structure interaction and shock-boundary layer interaction. The design objective for the test object is to assimilate a IF vibration mode at a given section of atypical compressor blade. Finite element (FE) analyses have been used to predict the frequency response of the test object prior to manufacturing. The design objectives have been verified experimentally by time-resolved laser measurements. It has been found that the FE predictions are in good agreement with experimental data. Furthermore it has been shown that the present test object allows for the achievement of the targeted vibration properties up to a frequency of 250Hz, corresponding to a reduced frequency above 0.8.
|
|
| 9. |
|
|
| 10. |
- Mårtensson, H., et al.
(författare)
-
Aeroelastic properties of closely spaced modes for a highly loaded transonic fan
- 2008
-
Konferensbidrag (refereegranskat)abstract
- In the design of modem compressor blades of wide chord (low aspect ratio) type it is often hard to avoid having modes that are close to each other in frequency. Modes which are closely spaced can interact dynamically. Mistuning and localization of stresses are known problems with this. A potential problem with this is also the possibility of coalescence flutter of the modes. Even if the modes are frequency separated at zero rotational speed, the centrifugal stiffening may cause the modes to attract and even cross (or veer) at some rotational speed. In design, mode separation criteria are sometimes applied in order to minimize the risk of encountering unknown dynamic phenomena. This study is performed to better understand the dynamics of closely spaced modes with respect to risk for coalescence flutter. A reduced order aeroelastic system is then constructed that describes the interaction between the different modes. The aeroelastic couplings are then calculated for the 2 mode system. The method is general in terms of mode shapes and number of interacting modes. A parametrical study is performed in order to study how strongly the modes interact when the frequency separation is decreased and if there is a risk of destructive coalescence flutter. The investigation is performed on a high pressure ratio front stage fan blade. The tendency of the modes to interact depends on the strength of the coupling compared to the strength of the pure structural modes. The tendency towards instability was increased in cases where the stability margin was smaller of the single modes. The results can be considered to support a separation criterion of 2% for the lower. A re-evaluation should be considered if lighter blade material and increased loads are to be used.
|
|
