| 1. |
- Andersson, Viktor, 1983, et al.
(författare)
-
Integrated Algae Cultivation for Municipal Wastewater Treatment and Biofuels Production in Industrial Clusters
- 2012
-
Ingår i: World Renewable Energy Forum, WREF 2012. - 9781622760923 ; 1, s. 684-691
-
Konferensbidrag (refereegranskat)abstract
- This paper presents a case study on biofuels production from microalgae cultivated in municipal wastewater in Gothenburg, Sweden. A) Combined biodiesel and biogas production and B) only biogas production, are compared in terms of product outputs, impact on global CO2 emissions reduction and economic performance. Land-use efficiency of biofuels from microalgae was compared with other biofuel production routes. The biofuel production process is assumed to be integrated with a wastewater treatment plant and an industrial cluster, providing the opportunity to reduce the CO2 emissions of the process compared to stand-alone operation.The results show that case A is advantageous in terms of all the studied factors. A higher area efficiency of algae biofuels production routes compared to other biofuel production routes was shown. Nutrient availability in municipal wastewater is shown to be the limiting factor regarding product output. The competitive advantage of co-location with a wastewater treatment plant is clearly shown.
|
|
| 2. |
|
|
| 3. |
- Broberg, Sarah, 1983-, et al.
(författare)
-
Integrated Algae Cultivation for Biofuels Production in Industrial Clusters
- 2011
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Declining fossil resources and the issue of climate change caused by anthropogenic emissions of greenhouse gases make global action towards a more sustainable society inevitable. The EU decided in 2007 that 20 % of the union´s energy use should origin from renewable resources by the year 2020. One way of achieving this goal is to increase the utilisation of biofuels. Today 2nd generation biofuels are being developed. They are seen as a more sustainable solution than 1st generation biofuels since they have a higher area efficiency (more fuel produced per area) and the biomass can be cultivated at land which is not suitable for food crops. One of these 2nd generation biofuels are fuels derived from microalgae. In this study a thorough literature survey has been conducted in order to assess the State-of-the-Art in algae biofuels production. The literature review showed the importance of a supplementary function in conjunction with algae cultivation and therefore algae cultivation for municipal wastewater treatment and capturing CO2 emissions from industry was included in the study. It was assumed that all the wastewater of the city of Gothenburg, Sweden, was treated by algae cultivation. A computer model of the whole production process has been developed, covering; algae cultivation in conjunction with wastewater treatment, algae harvesting and biofuels production. Two different cases are modelled; a first case including combined biodiesel and biogas production, and a second case investigating only biogas production. Both cases have been evaluated in terms of product outputs, CO2 emissions savings and compared to each other in an economic sense. Utilising the nutrients in the wastewater of Gothenburg it is possible to cultivate 29 ktalgae/year. In the biogas case it is possible to produce 205 GWhbiogas/year. The biogas/biodiesel case showed a production potential of 63 GWhbiodiesel/year and 182 GWhbiogas/year. There is a deficit of carbon in the wastewater, hence CO2 is injected as flue gases from industrial sources. The biodiesel/biogas case showed an industrial CO2 sequestration capacity of 24 ktCO2/year while in the biogas case 22.6 ktCO2/year, could be captured. Estimating the total CO2 emissions savings showed 46 ktCO2/year in the biodiesel/biogas case and 38 ktCO2/year for the biogas case. The importance of including wastewater treatment in the process was confirmed, as it contributes with 13.7 ktCO2/year to the total CO2 emissions savings. Economic comparison of the two cases showed that biodiesel in conjunction with biogas production is advantageous compared to only biogas production. This is mainly due to the higher overall fuel yield and the high willingness to pay for biodiesel. The total incomes from biodiesel/biogas sales were calculated to 221 million SEK/year and 193 million SEK/year for biogas. It was found that the higher incomes from biodiesel/biogas sales repay the increased investment for the biodiesel process in approximately 3 years.
|
|
| 4. |
- Ali, Hassan, et al.
(författare)
-
Cost estimation of heat recovery networks for utilization of industrial excess heat for carbon dioxide absorption
- 2018
-
Ingår i: International Journal of Greenhouse Gas Control. - : Elsevier BV. - 1750-5836. ; 74, s. 219-228
-
Tidskriftsartikel (refereegranskat)abstract
- The absorption of CO 2 using solvents (e.g., amines) is considered a state-of-the-art, albeit energy-intensive process for CO 2 capture. While it is generally recognized that the utilization of waste heat has potential to reduce the energy-associated costs for CO 2 capture, the cost of waste heat recovery is seldom quantified. In this work, the cost of heat-collecting steam networks for waste heat recovery for solvent regeneration is estimated. Two types of networks are applied to waste heat recovery from the flue gases of four process industries (cement, silicon, iron & steel, and pulp & paper) via a heat recovery steam generator (HRSG). A novel approach is presented that estimates the capital and operational expenditures for waste heat recovery from process industries. The results show that the overall cost (CAPEX + OPEX) of steam generated from one hot flue gas source is in the range of 1.1–4.1 €/t steam. The cost is sensitive to economic parameters, installation factors, the overall heat transfer coefficient, steam pressure, and to the complexity of the steam network. The cost of steam from an existing natural gas boiler is roughly 5–20-times higher than that of steam generated from recovered waste heat. The CAPEX required to collect the heat is the predominant factor in the cost of steam generation from waste heat. The major contributor to the CAPEX is the heat recovery steam generator, although the length of the steam pipeline (when heat is collected from two sources or over long distances) is also important for the CAPEX.
|
|
| 5. |
- Andersson, Viktor, 1983, et al.
(författare)
-
Algae-based biofuel production as part of an industrial cluster
- 2014
-
Ingår i: Biomass and Bioenergy. - : Elsevier BV. - 1873-2909 .- 0961-9534. ; 71, s. 113-124
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents a study on the production of biofuels from algae cultivated in municipal wastewater in Gothenburg, Sweden. A possible biorefinery concept is studied based on two cases; Case A) combined biodiesel and biogas production, and Case B) only biogas production. The cases are compared in terms of product outputs and impact on global CO2 emissions mitigation. The area efficiency of the algae-based biofuels is also compared with other biofuel production routes. The study investigates the collaboration between an algae cultivation, biofuel production processes, a wastewater treatment plant and an industrial cluster for the purpose of utilizing material flows and industrial excess heat between the actors. This collaboration provides the opportunity to reduce the CO2 emissions from the process compared to a stand-alone operation. The results show that Case A is advantageous to Case B with respect to all studied factors. It is found that the algae-based biofuel production routes investigated in this study has higher area efficiency than other biofuel production routes. The amount of algae-based biofuel possible to produce corresponds to 31 MWfuel for Case A and 26 MWfuel in Case B.
|
|
| 6. |
- Andersson, Viktor, 1983, et al.
(författare)
-
Alkali desorption from ilmenite oxygen carrier particles used in biomass combustion
- 2024
-
Ingår i: Fuel. - 0016-2361 .- 1873-7153. ; 359
-
Tidskriftsartikel (refereegranskat)abstract
- Oxygen-carrying fluidized bed materials are increasingly used in novel technologies for carbon capture and storage, and to improve the efficiency of fuel conversion processes. Potassium- and sodium-containing compounds are released during biomass combustion and may have both negative and positive effects on conversion processes. Ilmenite is an important oxygen carrier material with the ability to capture alkali in the form of titanates. This is a desirable property since it may reduce detrimental alkali effects including fouling, corrosion, and fluidized bed agglomeration. This study investigates the interactions of alkali-containing compounds with ilmenite particles previously used in an industrial scale (115 MWth) oxygen carrier aided combustion system. The ilmenite samples were exposed to temperatures up to 1000 °C under inert and oxidizing conditions while the alkali release kinetics were characterized using online alkali monitoring. Alkali desorption occurs between 630 and 800 °C, which is attributed to loosely bound alkali at or near the surface of the particles. Extensive alkali release is observed above 900 °C and proceeds during extended time periods at 1000 °C. The release above 900 °C is more pronounced under oxidizing conditions and approximately 9.1 and 3.2 wt% of the alkali content is emitted from the ilmenite samples in high and low oxygen activity, respectively. Detailed material analyses using scanning electron microscopy with energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy were conducted before and after temperature treatment, which revealed that the concentrations of potassium, sodium and chlorine decrease at the outermost surface of the ilmenite particles during temperature treatment, and Cl is depleted to a deeper level in oxidizing conditions compared to inert. The implications for ilmenite-ash interactions, oxygen carrier aided combustion and chemical looping systems are discussed.
|
|
| 7. |
- Andersson, Viktor, 1983, et al.
(författare)
-
Alkali interactions with a calcium manganite oxygen carrier used in chemical looping combustion
- 2022
-
Ingår i: Fuel Processing Technology. - : Elsevier BV. - 0378-3820 .- 1873-7188. ; 227
-
Tidskriftsartikel (refereegranskat)abstract
- Chemical-Looping Combustion (CLC) of biofuels is a promising technology for cost-efficient CO2 separation and can lead to negative CO2 emissions when combined with carbon capture and storage. A potential challenge in developing CLC technology is the effects of alkali metal-containing compounds released during fuel conversion. This study investigates the interactions between alkali and an oxygen carrier (OC), CaMn0.775Ti0.125Mg0.1O3-δ, to better understand the fate of alkali in CLC. A laboratory-scale fluidized bed reactor is operated at 800–900 °C in oxidizing, reducing and inert atmospheres to mimic CLC conditions. Alkali is fed to the reactor as aerosol KCl particles, and alkali in the exhaust is measured online with a surface ionization detector. The alkali concentration changes with gas environment, temperature, and alkali loading, and the concentration profile has excellent reproducibility over repeated redox cycles. Alkali-OC interactions are dominated by alkali uptake under most conditions, except for a release during OC reduction. Uptake is significant during stable reducing conditions, and is limited under oxidizing conditions. The total uptake during a redox cycle is favored by a high alkali loading, while the influence of temperature is weak. The implications for the understanding of alkali behavior in CLC and further development are discussed.
|
|
| 8. |
- Andersson, Viktor, 1983, et al.
(författare)
-
Alkali-wall interactions in a laboratory-scale reactor for chemical looping combustion studies
- 2021
-
Ingår i: Fuel Processing Technology. - : Elsevier BV. - 0378-3820 .- 1873-7188. ; 217
-
Tidskriftsartikel (refereegranskat)abstract
- Alkali metal-containing compounds are readily released during thermal conversion of solid fuels, and may have both detrimental and beneficial effects on chemical looping combustion. Here, we characterize alkali interactions with the inner walls of a laboratory-scale reactor under oxidizing, reducing and inert conditions at temperatures up to 900 °C. KCl aerosol particles are continuously introduced to the stainless steel reactor and the alkali concentration is measured on-line with a surface ionization detector. Aerosol particles evaporate at temperatures above 500 °C and KCl molecules rapidly diffuse to the reactor wall. Up to 92% of the alkali reaching the wall below 700 °C remains adsorbed, while re-evaporation is important at higher temperatures, where up to 74% remains adsorbed. Transient changes in alkali concentration are observed during repeated redox cycles, which are associated with changes in chemical composition of the wall material. Metal oxides on the reactor wall are partially depleted under reducing conditions, which allow for the formation of a new potassium-rich phase that is stable in a reducing atmosphere, but not under inert conditions. The observed wall effects are concluded to be extensive and include major transient effects depending on gas composition, and the implications for laboratory studies and improved experimental methodology are discussed.
|
|
| 9. |
- Andersson, Viktor, 1983, et al.
(författare)
-
Design and first application of a novel laboratory reactor for alkali studies in chemical looping applications
- 2023
-
Ingår i: Fuel Processing Technology. - 0378-3820. ; 252
-
Tidskriftsartikel (refereegranskat)abstract
- Alkali compounds are readily released during biomass conversion and their complex interactions with reactor walls and sampling equipment makes detailed investigations challenging. This study evaluates a novel laboratory-scale fluidized bed reactor for chemical looping combustion (CLC) studies. The reactor design is based on detailed consideration of the behavior of alkali-containing molecules and aerosol particles and is guided by computational fluid dynamic simulations. The design allows for interactions between gaseous alkali and a fluidized bed, while minimizing alkali interactions with walls before and after the fluidized bed. The function of the laboratory reactor is demonstrated in experiments using online gas and alkali analysis. Alkali is continuously fed to the reactor as KOH or KCl aerosol with and without a fluidized bed of the oxygen carrier CaMn0.775Ti0.125Mg0.1O3-δ present in inert, reducing and oxidizing conditions at temperatures up to 900 °C. Alkali uptake by the OC is characterized in all conditions, and observed to sensitively depend on gas composition, reactor temperature and type of alkali compound. The experimental setup is concluded to have a significantly improved functionality compared to a previously used reactor, which opens up for detailed studies of interactions between alkali compounds and oxygen carriers used in CLC.
|
|
| 10. |
- Andersson, Viktor, 1983, et al.
(författare)
-
Dubbel energivinst med alger som biobränsle
- 2013
-
Ingår i: Energimagasinet.
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Idag kan produktionen av biobränsle påverka livsmedelsförsörjningen negativt. Istället för att biobränsleproduktion ska konkurrera med produktion av livsmedel kan en hittills outnyttjad resurs - kommunalt avloppsvatten - användas för produktion av alger som i sin tur kan användas till biogas och biodiesel. Ny forskning visar på denna potential.
|
|
