| 31. |
- Ardeberg, Arne, et al.
(författare)
-
Science drivers of a 50-m AO telescope
- 2003
-
Ingår i: Proceedings of the SPIE - The International Society for Optical Engineering. - : SPIE. - 1996-756X .- 0277-786X. ; 5382:1, s. 37-46
-
Konferensbidrag (refereegranskat)abstract
- Some leading science programs undertaken with Very Large Telescopes and challenges driving the progress of the Extremely Large Telescopes are discussed together with the corresponding requirements. They concern expolanets, Earth-like planets, habitable zones, formation of stars and galaxies, first stars and cosmology. A description is attempted
|
|
| 32. |
- Arran, C., et al.
(författare)
-
Potential to measure quantum effects in recent all-optical radiation reaction experiments
- 2019
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 11039
-
Konferensbidrag (refereegranskat)abstract
- The construction of 10 PW class laser facilities with unprecedented intensities has emphasized the need for a thorough understanding of the radiation reaction process. We describe simulations for a recent all-optical colliding pulse experiment, where a GeV scale electron bunch produced by a laser wakefield accelerator interacted with a counter-propagating laser pulse. In the rest frame of the electron bunch, the electric field of the laser pulse is increased by several orders of magnitude, approaching the Schwinger field and leading to substantial variation from the classical Landau-Lifshitz model. Our simulations show how the final electron and photon spectra may allow us to differentiate between stochastic and semi-classical models of radiation reaction, even when there is significant shot-to-shot variation in the experimental parameters. In particular, constraints are placed on the maximum energy spread and shot-to-shot variation permissible if a stochastic model is to be proven with confidence.
|
|
| 33. |
- Auriacombe, Olivier, 1989, et al.
(författare)
-
Oil, water, and ice detection on road surfaces with a millimeter-wave radiometer
- 2020
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 11533
-
Konferensbidrag (refereegranskat)abstract
- Passive radiometers are well-known instruments used in the characterization of soil, sea surfaces and remote sensing of the earth atmosphere with satellites or airplanes. The instrument described in this article is a dual-polarised superheterodyne radiometer operating around 93 GHz. It is placed on a structure to measure road surface conditions (ice, water or oil) in a laboratory-controlled environment. This radiometer measures the reflected and emitted radiations from the road surface (asphalt and concrete) and the background temperature, in two orthogonal polarizations (H and V). The difference in the dielectric properties of the ice, oil and water from dry road surface allows to distinguish them efficiently. This kind of technique can be used for road surface recognition in all weather conditions and does not require presence of daylight or other sources of illumination. In this paper, calibration procedures and radiometric characterisations of the radiometer are studied in order to select the best and simpler method to operate the radiometer. It was found that calibrating the radiometer with only one blackbody target or using a table of gain and system noise temperature is sufficiently accurate over a long time to be able to distinguish dry from ice or water covered surfaces. The laboratory results are showing a high difference in the brightness temperature between road surface covered with ice, water or oil and the dry road surface. No ambiguities between those conditions exist but potential limitations could rise, for example if the road surface roughness changes during a measurement. Those promising results validate the potential of using radiometer for road safety and the automotive industry. The presented laboratory measurements are the first step towards the implementation of the instrument into a moving vehicle for alerting drivers ahead of unforeseen dangers. Downloading of the abstract is permitted for personal use only.
|
|
| 34. |
- Aurumskjöld, Marie-Louise, et al.
(författare)
-
An investigation of the iterative reconstruction method iDose(4) on a Philips CT Brilliance 64 using a Catphan 600 phantom
- 2012
-
Ingår i: Medical Imaging 2012: Physics of Medical Imaging. - : SPIE. - 0277-786X .- 1996-756X. ; 8313
-
Konferensbidrag (refereegranskat)abstract
- The number of CT examinations giving a relatively high patient exposure is increasing. It is therefore important to optimize the imaging conditions at these investigations. Many steps have been taken to reduce the radiation doses in CT examinations. Currently much work is related to iterative image reconstruction methods as alternative to the filtered back projection method. The aim of this work was to evaluate quality parameters in images from a CT (Philips Brilliance 64) equipped with the iterative reconstruction method iDose(4) using a Catphan 600 phantom with and without body simulating ring. CT scans using abdomen protocol were taken with various tube currents and tube voltage and keeping collimation and pitch unchanged for all scans. All collected data were reconstructed with different levels of iDose(4) (Level 2, 4, 6) and traditional filtered back projection. Image quality parameters were evaluated using AutoQA Lite (TM) (Version 2.3 2007 Iris QA, LLC). Results from the study shows that the iterative reconstruction method decreases the noise with 15-45% compared with filtered back projection depending on which level of iDose(4) is used. The percentage reduction in noise level is the same with and without body simulating ring. Low contrast was improved with iDose(4) and spatial resolution is only marginally affected by the method of reconstruction. However by reducing the image noise, the detectability can be improved. Our conclusion is that there is great potential to reduce the noise and thereby improve the image quality by using iterative reconstruction methods. This can also be used to lower radiation dose and maintain image quality or improve image quality.
|
|
| 35. |
- Aurumskjöld, Marie-Louise, et al.
(författare)
-
Model based iterative reconstruction IMR gives possibility to evaluate thinner slice thicknesses than conventional iterative reconstruction iDose(4) - a phantom study
- 2015
-
Ingår i: Medical Imaging 2015: Physics of Medical Imaging. - : SPIE. - 1996-756X .- 0277-786X. ; 9412, s. 94124-94124
-
Konferensbidrag (refereegranskat)abstract
- Computed tomography (CT) is one of the most important modalities in a radiological department, which produces images with high diagnostic confidence, but in some cases contributes to a high radiation dose to the patient. The radiation dose can be reduced by the use of advanced image reconstruction algorithms. This study was done on a Philips Brilliance iCT with iterative reconstruction iDose(4) and model-based iterative reconstruction IMR. The purpose was to investigate the effect on the image quality with thin slice images reconstructed with IMR, compared to standard slice thickness reconstructed with iDose(4). Objective measurements of noise and contrast-to-noise ratio were performed using an image quality phantom, an anthropomorphic phantom and clinical cases. Subjective evaluations of low-contrast resolution were performed by observers using an image quality phantom. IMR gives strong noise reduction and enhanced low-contrast and thereby enable selection of thinner slice thickness. Objective evaluation of image noise shows that thin slices reconstructed with IMR provides lower noise than thicker slice images reconstructed with iDose(4). With IMR the slice thickness is of less importance for the noise. With thinner slices the partial volume artefacts becomes less pronounced. In conclusion, we have shown that IMR enables reduction of the slice thickness and at the same time maintain or even reduce the noise level compared to iDose(4) reconstruction with standard slice thickness. This will subsequently result in an improvement of image quality for images reconstructed with IMR.
|
|
| 36. |
- Axelsson, Rebecca, et al.
(författare)
-
Simultaneous digital breast tomosynthesis and mechanical imaging in women recalled from screening - A preliminary analysis
- 2022
-
Ingår i: 16th International Workshop on Breast Imaging, IWBI 2022. - : SPIE. - 1996-756X .- 0277-786X. - 9781510655843 ; 12286
-
Konferensbidrag (refereegranskat)abstract
- We have developed a method for simultaneous tomosynthesis and mechanical imaging, called DBTMI. Mechanical imaging measures the stress distribution over the compressed breast surface. Malignant tissue is usually stiffer than benign, which results in higher stress on the compressed breast and enables to distinguish malignant from benign findings. By combining tomosynthesis and mechanical imaging, we could improve cancer detection accuracy by reducing the number of false positive findings. In this study we have analysed clinical DBTMI data, collected from 52 women from an ongoing pilot study at the Skåne University Hospital, Malmö, Sweden. We measured the range of the average stress over the breast surface, the range of average stress over the location of suspected lesions, and the normalized stress over the lesion location. Preliminary results show that the range of stress over the breast surface was 1.23-5.84 kPa, the range over the lesion location 2.10-10.10 kPa, and the normalized stress 1.12-2.44 over the lesion location. Overall, the local stress over malignant lesions was higher than the average stress over the entire breast surface. This is the first step investigating criteria to distinguish between malignant and benign findings based upon clinical DBTMI data.
|
|
| 37. |
- Ayerden, N.P., et al.
(författare)
-
Design, fabrication and characterization of LVOF-based IR microspectrometers
- 2014
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. - 9781628410785 ; 9130
-
Konferensbidrag (refereegranskat)abstract
- This paper presents the design, fabrication and characterization of a linear variable optical filter (LVOF) that operates in the infrared (IR) spectral range. An LVOF-based microspectrometer is a tapered-cavity Fabry-Perot optical filter placed on top of a linear array of detectors. The filter transforms the optical spectrum into a lateral intensity profile, which is recorded by the detectors. The IR LVOF has been fabricated in an IC-compatible process flow using a resist reflow and is followed by the transfer etching of this resist pattern into the optical resonator layer. This technique provides the possibility to fabricate a small, robust and high-resolution micro-spectrometer in the IR spectral range directly on a detector chip. In these designs, the LVOF uses thin-film layers of sputtered Si and SiO 2 as the high and low refractive index materials respectively. By tuning the deposition conditions and analyzing the optical properties with a commercial ellipsometer, the refractive index for Si and SiO2 thin-films was measured and optimized for the intended spectral range. Two LVOF microspectrometers, one operating in the 1.8-2.8 μm, and the other in the 3.0-4.5 μm wavelength range, have been designed and fabricated on a silicon wafer. The filters consist of a Fabry-Perot structure combined with a band-pass filter to block the out-of-band transmission. Finally, the filters were fully characterized with an FTIR spectrometer and the transmission curve widening was investigated. The measured transmittance curves were in agreement with theory. The characterization shows a spectral resolution of 35-60 nm for the short wavelength range LVOF and 70 nm for the long wavelength range LVOF, which can be further improved using signal processing algorithms.
|
|
| 38. |
- Bakic, Predrag R., et al.
(författare)
-
Evaluation of a flat fielding method for simultaneous DBT and MI acquisition
- 2020
-
Ingår i: 15th International Workshop on Breast Imaging, IWBI 2020. - : SPIE. - 1996-756X .- 0277-786X. - 9781510638310 ; 11513
-
Konferensbidrag (refereegranskat)abstract
- We are developing a prototype system for simultaneous digital breast tomosynthesis (DBT) and mechanical imaging (MI). MI maps the local pressure distribution during clinical exams, to distinguish breast abnormalities from the normal tissue. Both DBT alone, and MI when combined with digital mammography, have demonstrated the ability to reduce false positives; however, the benefit of combining DBT with MI has not been investigated. A practical limitation in simultaneous DBT and MI is the presence of the MI sensor in DBT images. Metallic elements of the sensor generate noticeable artifacts, which may interfere with clinical analysis. Previously, we shown that the sensor artifacts can be reduced by flat fielding, which combines projections of the sensor acquired with and without the breast. In this paper we evaluate the flat fielding by assessing artifact reduction and visibility of breast abnormalities. Images of a physical anthropomorphic breast phantom were acquired using a clinical wide-angle DBT system. Visual evaluation was performed by experienced medical physicists. Image quality descriptors were calculated in images with and without flat fielding. To evaluate the visibility of abnormalities we estimated the full width at half maximum (FWHM) for calcifications modeled in the phantom. Our preliminary results suggest a substantial reduction of artifacts by flat fielding (on average 83%). Few noticeable artifacts remain near the breast edge, in the reconstructed image with the sensor in focus. We observed a 17% reduction in the FWHM. Future work would include a detailed assessment, and method optimization using virtual trials as a design aid.
|
|
| 39. |
- Baron, P., et al.
(författare)
-
Measurement of stratospheric and mesospheric winds with a submillimeter wave limb sounder: results from JEM/SMILES and simulation study for SMILES-2
- 2015
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. - 9781628418491 ; 9639, s. Article no. 96390N-
-
Konferensbidrag (refereegranskat)abstract
- Satellite missions for measuring winds in the troposphere and thermosphere will be launched in a near future. There is no plan to observe winds in the altitude range between 30-90 km, though middle atmospheric winds are recognized as an essential parameter in various atmospheric research areas. Sub-millimetre limb sounders have the capability to fill this altitude gap. In this paper, we summarize the wind retrievals obtained from the Japanese Superconducting Submillimeter Wave Limb Emission Sounder (SMILES) which operated from the International Space Station between September 2009 and April 2010. The results illustrate the potential of such instruments to measure winds. They also show the need of improving the wind representation in the models in the Tropics, and globally in the mesosphere. A wind measurement sensitivity study has been conducted for its successor, SMILES-2, which is being studied in Japan. If it is realized, sub-millimeter and terahertz molecular lines suitable to determine line-of-sight winds will be measured. It is shown that with the current instrument definition, line-of-sight winds can be observed from 20 km up to more than 160 km. Winds can be retrieved with a precision better than 5 m s(-1) and a vertical resolution of 2-3 km between 35-90 km. Above 90 km, the precision is better than 10 m s(-1) with a vertical resolution of 3-5 km. Measurements can be performed day and night with a similar sensitivity. Requirements on observation parameters such as the antenna size, the satellite altitude are discussed. An alternative setting for the spectral bands is examined. The new setting is compatible with the general scientific objectives of the mission and the instrument design. It allows to improve the wind measurement sensitivity between 35 to 90 km by a factor 2. It is also shown that retrievals can be performed with a vertical resolution of 1 km and a precision of 5-10 m s(-1) between 50 and 90 km. RAGAM A, 1953, PHYSICAL REVIEW, V92, P1448
|
|
| 40. |
- Barrientos Z, C. M., et al.
(författare)
-
Vertically illuminated TW-UTC photodiodes for terahertz generation
- 2012
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. - 9780819491534 ; 8452
-
Konferensbidrag (refereegranskat)abstract
- More efficient and powerful continuous-wave photonic mixers as terahertz sources are motivated by the need of more versatile local oscillators for submillimeter/terahertz receiver systems. Uni-Travelling Carrier (UTC) photodiodes are very prospective candidates for reaching this objective, but so far only have been reported as lumped-elements or as edge-illuminated optical-waveguide travelling-wave (TW) devices. To overcome the associated power limitations of those implementations, we are developing a novel implementation of the UTC photodiodes which combines a traveling-wave photomixer with vertical velocity-matched illumination in a distributed structure. In this implementation called velocity-matched travelling-wave uni-travelling carrier photodiode, it is possible to obtain in-situ velocity matching of the beat-fringes of the two angled laser beams with the submm/THz-wave on the stripline. In this way, minimum frequency roll-off is achieved by tuning the angle between the two laser beams. A first design of these TW-UTC PDs from our Terahertz Photonics Laboratory at University of Chile has been micro-fabricated at the MC2 cleanroom facility at Chalmers Technical University.
|
|
