| 41. |
- Campana, Alessandra, et al.
(författare)
-
Electrocardiographic recording with conformable organic electrochemical transistor fabricated on resorbable bioscaffold
- 2014
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 26:23, s. 3874-3878
-
Tidskriftsartikel (refereegranskat)abstract
- Organic electrochemical transistors are fabricated on a poly(L-lactide-co-glycolide) substrate. Fast and sensitive performance of the transistors allows recording of the electrocardiogram. The result paves the way for new types of bioelectronic interfaces with reduced invasiveness due to bioresorption and soft mechanical properties.
|
|
| 42. |
- Cao, Danfeng, 1991-, et al.
(författare)
-
Biohybrid Variable-Stiffness Soft Actuators that Self-Create Bone
- 2022
-
Ingår i: Advanced Materials. - Weinheim, Germany : Wiley-VCH Verlag GmbH & Co. KGaA. - 0935-9648 .- 1521-4095. ; 34:8
-
Tidskriftsartikel (refereegranskat)abstract
- Inspired by the dynamic process of initial bone development, in which a soft tissue turns into a solid load-bearing structure, the fabrication, optimization, and characterization of bioinduced variable-stiffness actuators that can morph in various shapes and change their properties from soft to rigid are hereby presented. Bilayer devices are prepared by combining the electromechanically active properties of polypyrrole with the compliant behavior of alginate gels that are uniquely functionalized with cell-derived plasma membrane nanofragments (PMNFs), previously shown to mineralize within 2 days, which promotes the mineralization in the gel layer to achieve the soft to stiff change by growing their own bone. The mineralized actuator shows an evident frozen state compared to the movement before mineralization. Next, patterned devices show programmed directional and fixated morphing. These variable-stiffness devices can wrap around and, after the PMNF-induced mineralization in and on the gel layer, adhere and integrate onto bone tissue. The developed biohybrid variable-stiffness actuators can be used in soft (micro-)robotics and as potential tools for bone repair or bone tissue engineering.
|
|
| 43. |
- Cao, Fangcheng, et al.
(författare)
-
Recent Advances in Oxidation Stable Chemistry of 2D MXenes
- 2022
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 34:13
-
Forskningsöversikt (refereegranskat)abstract
- As an emerging star of 2D nanomaterials, 2D transition metal carbides and nitrides, named MXenes, present a large potential in various research areas owing to their intrinsic multilayer structure and intriguing physico-chemical properties. However, the fabrication and application of functional MXene-based devices still remain challenging as they are prone to oxidative degradation under ambient environment. Within this review, the preparation methods of MXenes focusing on the recent investigations on their thermal structure-stability relationships in inert, oxidizing, and aqueous environments are systematically introduced. Moreover, the key factors that affect the oxidation of MXenes, such as, atmosphere, temperature, composition, microstructure, and aqueous environment, are reviewed. Based on different scenarios, strategies for avoiding or delaying the oxidation of MXenes are proposed to encourage the utilization of MXenes in complicated environments, especially at high temperature. Furthermore, the chemistry of MXene-derived oxides is analyzed, which can offer perspectives on the further design and fabrication of novel 2D composites with the unique structures of MXenes being preserved.
|
|
| 44. |
- Carlos, L. D., et al.
(författare)
-
Nanoscopic photoluminescence memory as a fingerprint of complexity in self-assembled alkyl/siloxane hybrids
- 2007
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 19:3, s. 341-348
-
Tidskriftsartikel (refereegranskat)abstract
- A thermally activated photoluminescence memory effect, induced by a reversible order-disorder phase transition of the alkyl chains, is reported for highly organized bilayer alkyl/siloxane hybrids (see figure; left at room temperature, right at 120 degrees C). The emission energy is sensitive to the annihilation/formation of the hydrogen-bonded amide-amide array displaying a unique nanoscopic sensitivity (ca. 150 nm).
|
|
| 45. |
- Chae, Soosang, et al.
(författare)
-
Stretchable Thin Film Mechanical-Strain-Gated Switches and Logic Gate Functions Based on a Soft Tunneling Barrier
- 2021
-
Ingår i: Advanced Materials. - : Wiley-Blackwell. - 0935-9648 .- 1521-4095. ; 33:41
-
Tidskriftsartikel (refereegranskat)abstract
- Mechanical-strain-gated switches are cornerstone components of material-embedded circuits that perform logic operations without using conventional electronics. This technology requires a single material system to exhibit three distinct functionalities: strain-invariant conductivity and an increase or decrease of conductivity upon mechanical deformation. Herein, mechanical-strain-gated electric switches based on a thin-film architecture that features an insulator-to-conductor transition when mechanically stretched are demonstrated. The conductivity changes by nine orders of magnitude over a wide range of tunable working strains (as high as 130%). The approach relies on a nanometer-scale sandwiched bilayer Au thin film with an ultrathin poly(dimethylsiloxane) elastomeric barrier layer; applied strain alters the electron tunneling currents through the barrier. Mechanical-force-controlled electric logic circuits are achieved by realizing strain-controlled basic (AND and OR) and universal (NAND and NOR) logic gates in a single system. The proposed material system can be used to fabricate material-embedded logics of arbitrary complexity for a wide range of applications including soft robotics, wearable/implantable electronics, human-machine interfaces, and Internet of Things.
|
|
| 46. |
- Chang, Jian, 1990-, et al.
(författare)
-
Tailor-Made White Photothermal Fabrics : A Bridge between Pragmatism and Aesthetic
- 2023
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 35:41
-
Tidskriftsartikel (refereegranskat)abstract
- Maintaining human thermal comfort in the cold outdoors is crucial for diverse outdoor activities, e.g., sports and recreation, healthcare, and special occupations. To date, advanced clothes are employed to collect solar energy as a heat source to stand cold climates, while their dull dark photothermal coating may hinder pragmatism in outdoor environments and visual sense considering fashion. Herein, tailor-made white webs with strong photothermal effect are proposed. With the embedding of cesium–tungsten bronze (CsxWO3) nanoparticles (NPs) as additive inside nylon nanofibers, these webs are capable of drawing both near-infrared (NIR) and ultraviolet (UV) light in sunlight for heating. Their exceptional photothermal conversion capability enables 2.5–10.5 °C greater warmth than that of a commercial sweatshirt of six times greater thickness under different climates. Remarkably, this smart fabric can increase its photothermal conversion efficiency in a wet state. It is optimal for fast sweat or water evaporation at human comfort temperature (38.5 °C) under sunlight, and its role in thermoregulation is equally important to avoid excess heat loss in wilderness survival. Obviously, this smart web with considerable merits of shape retention, softness, safety, breathability, washability, and on-demand coloration provides a revolutionary solution to realize energy-saving outdoor thermoregulation and simultaneously satisfy the needs of fashion and aesthetics.
|
|
| 47. |
|
|
| 48. |
- Chen, Desui, et al.
(författare)
-
Shelf-Stable Quantum-Dot Light-Emitting Diodes with High Operational Performance
- 2020
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 32
-
Tidskriftsartikel (refereegranskat)abstract
- Quantum-dot light-emitting diodes (QLEDs) promise a new generation of high-performance, large-area, and cost-effective electroluminescent devices for both display and solid-state lighting technologies. However, a positive ageing process is generally required to improve device performance for state-of-the-art QLEDs. Here, it is revealed that the in situ reactions induced by organic acids in the commonly used encapsulation acrylic resin lead to positive ageing and, most importantly, the progression of in situ reactions inevitably results in negative ageing, i.e., deterioration of device performance after long-term shelf storage. In-depth mechanism studies focusing on the correlations between the in situ chemical reactions and the shelf-ageing behaviors of QLEDs inspire the design of an electron-transporting bilayer, which delivers both improved electrical conductivity and suppressed interfacial exciton quenching. This material innovation enables red QLEDs exhibiting neglectable changes of external quantum efficiency (>20.0%) and ultralong operational lifetime (T-95: 5500 h at 1000 nits) after storage for 180 days. This work provides design principles for oxide electron-transporting layers to realize shelf-stable and high-operational-performance QLEDs, representing a new starting point for both fundamental studies and practical applications.
|
|
| 49. |
- Chen, Haiyang, et al.
(författare)
-
Heterogeneous Nucleating Agent for High-Boiling-Point Nonhalogenated Solvent-Processed Organic Solar Cells and Modules
- 2024
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095.
-
Tidskriftsartikel (refereegranskat)abstract
- High-boiling-point nonhalogenated solvents are superior solvents to produce large-area organic solar cells (OSCs) in industry because of their wide processing window and low toxicity; while, these solvents with slow evaporation kinetics will lead excessive aggregation of state-of-the-art small molecule acceptors (e.g. L8-BO), delivering serious efficiency losses. Here, a heterogeneous nucleating agent strategy is developed by grafting oligo (ethylene glycol) side-chains on L8-BO (BTO-BO). The formation energy of the obtained BTO-BO; while, changing from liquid in a solvent to a crystalline phase, is lower than that of L8-BO irrespective of the solvent type. When BTO-BO is added as the third component into the active layer (e.g. PM6:L8-BO), it easily assembles to form numerous seed crystals, which serve as nucleation sites to trigger heterogeneous nucleation and increase nucleation density of L8-BO through strong hydrogen bonding interactions even in high-boiling-point nonhalogenated solvents. Therefore, it can effectively suppress excessive aggregation during growth, achieving ideal phase-separation active layer with small domain sizes and high crystallinity. The resultant toluene-processed OSCs exhibit a record power conversion efficiency (PCE) of 19.42% (certificated 19.12%) with excellent operational stability. The strategy also has superior advantages in large-scale devices, showing a 15.03-cm2 module with a record PCE of 16.35% (certificated 15.97%). The heterogeneous nucleating agent (BTO-BO) is developed to suppress the excessive aggregation of L8-BO in high-boiling-point nonhalogenated solvents processing, achieving the active layer with high crystallinity and nano-scaled phase separation morphology. The resultant OSCs achieve record power conversion efficiencies of 19.42% (0.062-cm2) and 16.35% (15. 03-cm2) with excellent operational stabilities. image
|
|
| 50. |
- Chen, LC, et al.
(författare)
-
Excitation transfer in polymer photodiodes for enhanced quantum efficiency
- 2000
-
Ingår i: Advanced Materials. - 0935-9648 .- 1521-4095. ; 12:15, s. 1110-
-
Tidskriftsartikel (refereegranskat)abstract
- The realization of polymer solar cells is the driving force behind this research. In an idea inspired by photosynthesis, the authors have constructed efficient bilayer photodiodes by a well-chosen combination of conjugated polymers (see Figure) in the donor layer. Forster energy transfer within the donor layer allows the absorbed light to be channeled to the C-60 acceptor layer, improving the total photoconversion of the blend device.
|
|
