| 41. |
- Bocelli, S, et al.
(författare)
-
Experimental identification of the optical phonon of CoSi2 in the infrared
- 1995
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 91:1-4, s. 30-33
-
Tidskriftsartikel (refereegranskat)abstract
- A weak but clear optical structure was detected at 329 cm−1 by both reflectance and transmittance measurements in the far infrared on a 430 Å film of CoSi2 grown on Si(100). This is the first observation of the IR vibrational mode of the cubic structure of CoSi2 and the result is in very good agreement with theoretical calculations. In order to characterize the sample, the reflectance was extended up to 5.2 × 104 cm−1 and the refractive index was also directly obtained in a more limited spectral range by spectroscopic ellipsometry. The IR structure was then quantitatively analyzed by means of a fit procedure, obtaining the values of ω0 = 327 cm−1 for the phonon energy, of γ = 10.5 cm−1 for the damping parameter and of 0.006 electronic charges for the screened effective ionic charge.
|
|
| 42. |
- Borges, J., et al.
(författare)
-
Thin films composed of Ag nanoclusters dispersed in TiO2 : Influence of composition and thermal annealing on the microstructure and physical responses
- 2015
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 358, s. 595-604
-
Tidskriftsartikel (refereegranskat)abstract
- Noble metal powders containing gold and silver have been used for many centuries, providing different colours in the windows of the medieval cathedrals and in ancient Roman glasses. Nowadays, the interest in nanocomposite materials containing noble nanoparticles embedded in dielectric matrices is related with their potential use for a wide range of advanced technological applications. They have been proposed for environmental and biological sensing, tailoring colour of functional coatings, or for surface enhanced Raman spectroscopy. Most of these applications rely on the so-called localised surface plasmon resonance absorption, which is governed by the type of the noble metal nanoparticles, their distribution, size and shape and as well as of the dielectric characteristics of the host matrix. The aim of this work is to study the influence of the composition and thermal annealing on the morphological and structural changes of thin films composed of Ag metal clusters embedded in a dielectric TiO2 matrix. Since changes in size, shape and distribution of the clusters are fundamental parameters for tailoring the properties of plasmonic materials, a set of films with different Ag concentrations was prepared. The optical properties and the thermal behaviour of the films were correlated with the structural and morphological changes promoted by annealing. The films were deposited by DC magnetron sputtering and in order to promote the clustering of the Ag nanoparticles the as-deposited samples were subjected to an in-air annealing protocol. It was demonstrated that the clustering of metallic Ag affects the optical response spectrum and the thermal behaviour of the films.
|
|
| 43. |
- Bratus, V. Y., et al.
(författare)
-
Vacancy-related defects in ion-beam and electron irradiated 6H-SiC
- 2001
-
Ingår i: Applied Surface Science. - 0169-4332 .- 1873-5584. ; 184:04-jan, s. 229-236
-
Tidskriftsartikel (refereegranskat)abstract
- A brief review is given on EPR study of irradiation-induced defects in SiC. The results of low-temperature study of Ky1 and Ky2 centers reveal for both of them the C-S symmetry, spin S = 1/2 and close coincidence of the g-tensor components. For Ky2 defect the principal values of g-tensor have been determined as g(z) = 2.0048, g(x) = 2.0022 and g(y) = 2.0037, where z and x directions reside in the (11 (2) over bar0) plane and the z-axis makes up an angle 65 degrees with the c-axis. The same residence of z- and x-axis and an angle 59 degrees are found for Ky1 center, g(z) = 2.0058, g(x) = 2.0025 and g(y) = 2.0023. A comparison of experimental and calculated hyperfine (HF) parameters is presented which suggests that Ky2 and Ky1 defects can be assigned to the positively charged carbon vacancy in 6H-SiC. The EPR study of defects created along the Al+ ion track in n-type 6H-SiC shows that lineshape, linewidth and integral intensity of the EPR signal reflect the state of damaged layer generated by ion implantation. A variation of defect density with annealing is reported and defect origin is discussed.
|
|
| 44. |
- Briley, Chad, et al.
(författare)
-
Effects of annealing and conformal alumina passivation on anisotropy and hysteresis of magneto-optical properties of cobalt slanted columnar thin films
- 2017
-
Ingår i: Applied Surface Science. - : ELSEVIER SCIENCE BV. - 0169-4332 .- 1873-5584. ; 421, s. 320-324
-
Tidskriftsartikel (refereegranskat)abstract
- We present magneto-optical dielectric tensor data of cobalt and cobalt oxide slanted columnar thin films obtained by vector magneto-optical generalized ellipsometry. Room-temperature hysteresis magnetization measurements were performed in longitudinal and polar Kerr geometries on samples prior to and after a heat treatment process with and without a conformal Al2O3 passivation coating. The samples have been characterized by generalized ellipsometry, scanning electron microscopy, and Raman spectroscopy in conjuncture with density functional theory. We observe strongly anisotropic hysteresis behaviors, which depend on the nanocolumn and magnetizing field orientations. We find that deposited cobalt films that have been exposed to heat treatment and subsequent atmospheric oxidation into Co3O4, when not conformally passivated, reveal no measurable magneto-optical properties while cobalt films with passivation coatings retain highly anisotropic magneto-optical properties (C) 2016 Published by Elsevier B.V.
|
|
| 45. |
- Brohede, Ulrika, et al.
(författare)
-
A novel graded bioactive high adhesion implant coating
- 2009
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 255:17, s. 7723-7728
-
Tidskriftsartikel (refereegranskat)abstract
- One method to increase the clinical success rate of metal implants is to increase their bone bonding properties, i.e. to develop a bone bioactive surface leading to reduced risks of interfacial problems. Much research has been devoted to modifying the surface of metals to make them become bioactive. Many of the proposed methods include depositing a coating on the implant. However, there is a risk of coating failure due to low substrate adhesion. This paper describes a method to obtain bioactivity combined with a high coating adhesion via a gradient structure of the coating. Gradient coatings were deposited on Ti (grade 5) using reactive magnetron sputtering with increasing oxygen content. To increase the grain size in the coating, all coatings were post annealed at 385 degrees C. The obtained coating exhibited a gradual transition over 70 nm from crystalline titanium oxide (anatase) at the surface to metallic Ti in the substrate, as shown using cross-section transmission electron microscopy and X-ray photoelectron spectroscopy depth pro. ling. Using scratch testing, it could be shown that the adhesion to the substrate was well above 1 GPa. The bioactivity of the coating was verified in vitro by the spontaneous formation of hydroxylapatite upon storage in phosphate buffer solution at 37 degrees C for one week. The described process can be applied to implants irrespective of bulk metal in the base and should introduce the possibility to create safer permanent implants like reconstructive devices, dental, or spinal implants.
|
|
| 46. |
- Bruckner, Barbara, et al.
(författare)
-
The impact of surface oxidation on energy spectra of keV ions scattered from transition metals
- 2019
-
Ingår i: Applied Surface Science. - : ELSEVIER SCIENCE BV. - 0169-4332 .- 1873-5584. ; 479, s. 1287-1292
-
Tidskriftsartikel (refereegranskat)abstract
- Studying the initial stages of surface oxidation is of great relevance to understand how oxygen alters the physical and chemical properties at the interface of the host material to the environment and is therefore, crucial for improvement in manifold technological applications. We investigated the influence of surface oxygen on ion spectra recorded for keV noble gas ions backscattered from metal surfaces in low energy ion scattering (LEIS). Initially pure Zn and Ta surfaces, chosen for their well-characterized properties in ion-neutralization in LEIS, have been oxidized and ion spectra for pure and oxidized surfaces have been compared. Oxygen on the surface significantly influences shape and intensity of the backscattered ion spectrum at all energies: for both metal systems, the surface scattered ion yield of the metal is drastically decreasing under oxygen presence. The observed decrease, however, cannot be explained by the reduction in the surface areal density of the metal constituents exclusively. At least for Zn an additional significant change in charge exchange behavior is necessary to explain the observations. In contrast to the generally observed decrease in the yield of ions scattered from the outermost surface, the change in shape and intensity of the reionization background are found to show opposing trends and different energy dependencies for Zn and Ta.
|
|
| 47. |
- Bukaluk, A., et al.
(författare)
-
Auger electron spectroscopy, ellipsometry and photoluminescence investigations of Zn1-XBeXSe alloys
- 2001
-
Ingår i: Applied Surface Science. - 0169-4332 .- 1873-5584. ; 175-176, s. 531-537
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, properties of the Zn1-XBeXSe crystals grown from the melt by the high-pressure Bridgman method are reported. Spectroscopic ellipsometry has been used for determination of the complex dielectric function of Zn1-XBeXSe. On the basis of the photon energy dependence of the dielectric function, the energy gaps of alloys containing different beryllium concentrations have been evaluated. Measurements of the photoluminescence (PL) spectra allowed to find the excitonic gap in the investigated alloys. Auger electron spectroscopy (AES) with simultaneous argon ion sputtering has been used for determination of surface composition. AES investigations allowed to make predictions concerning distribution of particular elements in the samples. © 2001 Elsevier Science B.V.
|
|
| 48. |
- Canestraro, Carla Daniele, et al.
(författare)
-
Strong inter-conduction-band absorption in heavily fluorine doped tin oxide
- 2008
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 255:5, s. 1874-1879
-
Tidskriftsartikel (refereegranskat)abstract
- The optical, electrical and structural properties of thin. film tin oxide (TO), F-doped tin oxide (FTO; n(F) approximate to 6 x 10(20) cm (3)) and highly F-doped tin oxide (hFTO; n(F) approximate to 10 x 10(20) cm (3)), grown by spray pyrolysis technique, are studied by atomic force microscopy, Hall effect, X-ray. fluorescence and transmission/reflection measurements. The resistivity (rho = 32 x 10 (4) Omega cm for intrinsic tin oxide) shows intriguing characteristics when F concentration n(F) is increased (rho = 6 x 10 (4) Omega cm for FTO but 25 x 10 (4) Omega cm for hFTO) whereas the carrier concentration is almost constant at high F concentration (n(c) approximate to 6 x 10(20) cm (3) for FTO and hFTO). Thus, F seems to act both as a donor and a compensating acceptor in hFTO. The high carrier concentration has a strong effect on the optical band-edge absorption. Whereas intrinsic TO has room-temperature band-gap energy of E-g approximate to 3.2 eV with an onset to absorption at about 3.8 eV, the highly doped FTO and hFTO samples show relatively strong absorption at 2-3 eV. Theoretical analysis based on density functional calculations of FTO reveals that this is not a defect state within the band-gap region, but instead a consequence of a hybridization of the F donor states with the host conduction band in combination with a band. filling of the lowest conduction band by the free carriers. This allows photon-assisted inter-conduction band transitions of the free electrons to energetically higher and empty conduction bands, producing the below-gap absorption peak.
|
|
| 49. |
- Cao, Jie, et al.
(författare)
-
Molecular dynamics simulations of ion migration and adsorption on the surfaces of AFm hydrates
- 2023
-
Ingår i: Applied Surface Science. - : Elsevier. - 0169-4332 .- 1873-5584. ; 615
-
Tidskriftsartikel (refereegranskat)abstract
- Chloride salts can cause severe corrosion damage to reinforcing steel bars in cement-based materials whereas nitrite salts inhibit corrosion. The storage and release of these two anions in cement materials occurs mainly at the interface of monosulfoaluminate (AFm) hydrates. In this paper, molecular dynamics are used to analyze the interaction between anions and AFm phases and clarify the competitive relationships between the anions at adsorption sites on the AFm surface. It was found that the ordered structure of the [Ca2Al(OH)6]+ layers of the AFm plays a key role in anion adsorption and that the mobility of ions desorbed from AFm layers decreases linearly with increasing proximity to the AFm surfaces.
|
|
| 50. |
- Chakarov, D V, et al.
(författare)
-
Photos induced desorption and intercalation of potassium atoms deposited on graphite(0001)
- 1996
-
Ingår i: Applied Surface Science. - 0169-4332 .- 1873-5584. ; 106, s. 186-192
-
Tidskriftsartikel (refereegranskat)abstract
- In addition to the photodesorption phenomenon previously observed for single K atoms from a graphite surface covered with a monolayer of potassium we present new results related to the photon stimulated interaction of potassium with graphite, which concerns alternative routes for energy relaxation of the photo excited K adatoms: photoinduced intercalation. The desorption yield has a threshold at h omega approximate to 3 eV and a maximum at h omega(max) approximate to 4.9 eV, Polarization measurements indicate a substrate-mediated mechanism. The coverage dependence suggests that only the ionic 2D, K-phase is photo active. The proposed mechanism includes attachment of photo-generated hot electrons to the K 4s adsorbate resonance of energy E(res). Assuming an analogous excitation process we discuss different mechanisms for the K photo intercalation and possible applications of the photon stimulated doping of carboneous materials at low temperature.
|
|
