| 51. |
- Baby, Sultana Nasrin, et al.
(författare)
-
Developing an Automated City of Whittlesea Urban Tree Canopy Inventory Using Airborne LiDAR and Aerial Imagery
- 2019
-
Ingår i: Engineering. - USA : Scientific Research Publishing. - 1947-3931 .- 1947-394X. ; 11:12, s. 828-840
-
Tidskriftsartikel (refereegranskat)abstract
- The City of Whittlesea is in Melbourne’s north and is one of the largest municipalities in metropolitan Melbourne. The council GIS team using current aerial photos from 2017 and LiDAR (“LiDAR” stands for Light Detection and Ranging) point clouds 2009 products to identify trends in urban tree canopy cover in the established suburbs of the municipality between 2009 and 2017. The tree canopy coverage was calculated for residential properties, road reservations, public land and park sites within urban parts of Bundoora, Epping, Lalor, Mill Park, Thomastown, and South Morang. From the total project area of approximately 3499 hectares a test site was selected based on an extension of one of the LIDAR data tiles (e325n5828). This project investigates only 6 meters and higher tree canopy cover within the project area. The objectives of the project were to establish a methodology to calculate the urban tree canopy coverage from LiDAR 2009 data, that can be replicated in future calculations. The calculated urban tree canopy coverage from LiDAR 2009 data is 9%, compared to 8% coverage in 2017, based on aerial photography. This estimate was compared to similar Local Governance Areas that range from 12% to 40%. A key to planning and managing urban tree canopy is first to understand the quantity, quality, tree density and distribution of the resource across the landscape. Tree inventories and urban tree canopy analyses comprise an assortment of tools, technologies, and procedures that help us understand the structure and function of our urban tree canopy. The data and information gleaned from urban tree canopy assessments enable resource professionals and policymakers to make informed decisions about ordinances, housing diversity strategy, and budgeting, future tree planting programs and reduce urban heat islands.
|
|
| 52. |
- Baby, Sultana Nasrin, et al.
(författare)
-
Spatial Decision Support System for Coastal Zone Management under a Changing Climate in Victoria, Australia
- 2018
-
Ingår i: Engineering. - : Scientific Research Publishing. - 1947-3931 .- 1947-394X. ; 10:10, s. 637-642
-
Tidskriftsartikel (refereegranskat)abstract
- The ultimate aim of using spatial datasets and spatial data modelling is fo- cused on enabling a sustainable environment by bringing the public policies into practice. The consequence will be sustainable spatially aware strategic planning for all levels of Australian government. Geographical Information Systems (GIS) are the platform that can serve this aim provided that model, current process and spatial datasets are fit for purpose. To bring public policy into practice a broad range of knowledge from different disciplines is needed. Most decision making processes are pressured in terms of time and driving forces and also the process is beyond the knowledge of individuals in the var- ious disciplines. There is a need for immediate uptake models and tools which are relevant to the target subject that will facilitate this decision making process. This paper focuses on realizing the utility in spatial data and spatial data handling in order to help climate change adaptation programs at local government level. Web-based mapping tools can assist planners prepare for the changing climate conditions in Bass Coast Shire Council. The GIS team has gathered data from various climate research organizations to understand projections of what different climate scenarios might look like over the next 100-year period. From this website demo it is hoped that the user will under- stand how the tool works, background information on different GIS plat- forms, access to interactive mapping, online geospatial analysis tools, videos, open source resource, sea level tools, modelling, 3D visualization and direct download access to various planning and natural resource data sets relating to environment management. Some results from our elevation data analysesthrough these Web map visualization tools are provided.
|
|
| 53. |
- Bengtsson, Lars, 1963
(författare)
-
Implementation of Control algorithms in Small Embedded Systems
- 2020
-
Ingår i: Engineering. - : Scientific Research Publishing, Inc.. - 1947-3931 .- 1947-394X. ; 12:9, s. 623-639
-
Tidskriftsartikel (refereegranskat)abstract
- This work describes how a control algorithm can be implemented in a small (8-bit) microcontroller for the main purpose of merging embedded systems and control theory in electrical engineering undergraduate classes. Two different methods for discretizing the control expression are compared: Euler transformation and bilinear transformation. The sampling rate’s impact on the algorithm is discussed and theoretical results are verified by an application to a temperature control system in a heating plant. Four control algorithms are compared: PID and PI algorithms discretized with Euler and bilinear transformation, respectively. It is shown that for the heating plant used in this work, a bilinear PI algorithm implemented in a small 8-bit microcontroller outperforms a commercial controller from Panasonic. It is also demonstrated that all the derived algorithms can be implemented using integer calculations only, obviating the need for expensive and time-consuming floating-point calculations. This work bridges the gap between control theory equations and the implementation of control systems in small embedded systems with no inherent floating-point processing power.
|
|
| 54. |
- Bernardo, Ricardo, et al.
(författare)
-
Measurements of the Electrical Incidence Angle Modifiers of an Asymmetrical Photovoltaic/Thermal Compound Parabolic Concentrating-Collector
- 2013
-
Ingår i: Engineering. - : Scientific Research Publishing, Inc.. - 1947-3931 .- 1947-394X. ; 5, s. 37-43
-
Tidskriftsartikel (refereegranskat)abstract
- Reflector edges, sharp acceptance angles and by-pass diodes introduce large variations in the electrical performance of asymmetrical concentrating photovoltaic/thermal modules over a short incidence angle interval. It is therefore important to quantify these impacts precisely. The impact on the electrical performance of the optical properties of an asymmet-rical photovoltaic/thermal CPC-collector was measured in Maputo, Mozambique. The measurements were carried out with the focus on attaining a high resolution incidence angle modifier in both the longitudinal and transversal directions, since large variations were expected over small angle intervals. A detailed analysis of the contribution of the diffuse radiation to the total output was also carried out. The solar cells have an electrical efficiency of 18% while the maxi-mum measured electrical efficiency of the collector was 13.9 % per active glazed area and 20.9 % per active cell area, at 25 °C. Such data make it possible to quantify not only the electrical performance for different climatic and operating conditions but also to determine potential improvements to the collector design. The electrical output can be increased by a number of different measures, e.g. removing the outermost cells, turning the edge cells 90°, dividing each receiver side into three or four parts and directing the tracking, when used, along a north-south axis.
|
|
| 55. |
- Bhanbhro, Riaz, et al.
(författare)
-
Properties Evaluation of Concrete using Local Used Bricks as Coarse Aggregate
- 2014
-
Ingår i: Engineering. - : Scientific Research Publishing, Inc.. - 1947-3931 .- 1947-394X. ; 6:5, s. 211-216
-
Tidskriftsartikel (refereegranskat)abstract
- With time concrete / reinforced concrete has become the popular material for construction. Modern industry utilizes this material a lot and has produced various beautiful, eye catching and amazing structures. Due to modern requirements for living and developed construction industries, the old buildings (usually constructed with brick masonry) are demolished and are replaced with new modern buildings. Demolition of buildings results in waste materials which can create waste related problems and environmental issues. By using recycled aggregates weight of concrete can also be reduced, which can also solve problems related to self-weight of concrete. In this paper attempt has been made to use local used bricks from vicinity of Nawabshah, Pakistan, as coarse aggregate. Concrete cubes made with local recycled bricks are cast and tested for overall weight of concrete, moisture content, dynamic modulus of elasticity and compressive strength (nondestructive and destructive methods). The results showed that concrete derived from recycled aggregates attained lower strength than regular concrete. More detailed elaborated work is recommended with different mix ratios and different proportions recycled aggregates for better conclusions.
|
|
| 56. |
- Chabuk, Ali, et al.
(författare)
-
Landfill Sites Selection Using Analytical Hierarchy Process and Ratio Scale Weighting : Case Study of Al-Mahawil, Babylon, Iraq
- 2017
-
Ingår i: Engineering. - : Scientific Research Publishing. - 1947-3931 .- 1947-394X. ; 9:2, s. 123-141
-
Tidskriftsartikel (refereegranskat)abstract
- Selecting a landfill site is an optimal solution for the disposal of solid waste inAl-Mahawil Qadhaa, both to fulfill the environmental and scientific requirements,and to comply with regulations and restrictions in this Qadhaa. Presently,there is no landfill site in the area that meets the scientific site selection criteria.Therefore, in this study, two methods of multi-criteria decision-makingand Geographic Information System (GIS) were used to produce a map ofcandidate sites for landfill. Fifteen criteria were entered within GIS: groundwaterdepth, rivers, soil types; agriculture lands use, land use, elevation, slope,gas pipelines, oil pipelines, power lines, roads, railways, urban centers, villagesand archaeological sites. The Analytical Hierarchy Process (AHP) is the firstmethod that was applied to derive criteria weightings using the matrix of pairwisecomparisons. The second method was the Ratio Scale Weighting (RSW),which is based on experts’ opinion, in order to identify the criteria weightingsby giving a ratio score value for each criterion relative to the other criteria.Accuracy assessment (Kappa and Overall Assessment) methods were used tocompare the two raster maps which resulted from the two models, and to determinethe percentage value of matching pixels for the two maps. Two suitablecandidate sites for landfill were identified that satisfy the requirementswith an area of 2.218 km2 - 2.950 km2 in order to accommodate the solidwaste generated from the Qadhaa in the period 2020 to 2030.
|
|
| 57. |
- Chabuk, Ali, et al.
(författare)
-
Landfill Sitting by Two Methods in Al-Qasim, Babylon, Iraq and Comparing Them Using Change Detection Method
- 2017
-
Ingår i: Engineering. - : Scientific Research Publishing. - 1947-3931 .- 1947-394X. ; 9:8, s. 723-737
-
Tidskriftsartikel (refereegranskat)abstract
- The selecting of a site for landfill is considered as a difficult process because many criteria should be involved. The main aim of establishing a landfill is to protect the human and environment. Al-Qasim district is considered as the study area in this work. It is one of the main districts in Babylon Governorate, Iraq. There is no systematic site as landfill that fulfil the environmental and scientific criteria in this area. Therefore, the most important fifteen criteria that suited the environmental requirements were selected in the current study. These criteria are: groundwater depth, urban centers, rivers, villages, soil types, elevation, roads agricultural land use, slope, land use, archaeological sites, power lines, gas pipelines, oil pipelines and railways. Two methods of multi criteria decision making AHP (analytical hierarchy process) and SRS (straight rank sum) were applied to obtain the weights of criteria in dissimilar styles. The raster maps of the selected criteria were prepared and analyzed within the GIS software. Then, the change detection method was implemented to compare the two output raster maps resulted from AHP and SRS methods. Two appropriate candidate sites for landfill were selected to accommodate the cumulative solid waste until the year 2030 in Qasim district. The areas of these sites were 2.766 km2 and 2.055 km2 respectively.
|
|
| 58. |
- Chabuk, Ali, et al.
(författare)
-
Present Status of Solid Waste Management at Babylon Governorate, Iraq
- 2015
-
Ingår i: Engineering. - : Scientific Research Publishing, Inc.. - 1947-3931 .- 1947-394X. ; 5:7, s. 408-423
-
Tidskriftsartikel (refereegranskat)abstract
- Babylon Governorate covers an area of 5315 km2 with a population that reaches about 1,974,490 inhabitants in the central part of Iraq. Iraq produced 31,000 tons/day solid waste in 2013. The Governorate of Babylon produces annual 483,221 tons of solid waste. Management of collection and disposal of waste in Babylon Governorate is done through open dumping of waste and poor collection process. These sites do not conform to the scientific and environmental criteria applied in the selection of landfill sites. To find out how much solid waste is expected in the future, two methods were used to calculate the population growth in Babylon Governorate to the year 2030. The results showed that the total waste in 2030 will be 761,104 tons and 943055 tons while the cumulated quantity of solid waste expected till 2030 was 12,494,521 tons and 14,095,437 tons according to the first and second methods respectively.
|
|
| 59. |
- Darwesh, Ali, et al.
(författare)
-
Evaluation of Limestone Interval in the Drilled Surface Section of Bn-1 Oil Well
- 2016
-
Ingår i: Engineering. - : Scientific Research Publishing, Inc.. - 1947-3931 .- 1947-394X. ; 8:8, s. 515-524
-
Tidskriftsartikel (refereegranskat)abstract
- The first exploration oil well in any oil block consumes in general more time and cost than the other wells in the same block. Evaluating the drilled wells serves to improve the future operations. This paper evaluates the drilled surface section through real field data for the first exploration oil well drilled in one of the oil blocks, in Kurdistan north of Iraq. The surface section of the well was drilled with the conventional method to penetrate many different geological formations with tight intervals. Drilling efficiency and the difficulties encountered are discussed and explained using various data sources. All daily drilling reports concerning a specific interval were studied. This includes weight on bit, string rotation, mud pump flow and penetration rate. Evaluation was carried out by analyzing the used controllable drilling parameters with the formations features. Penetration of the Pila Spi formation (Middle Eocene) was the most difficult formation in the drilled section. Microsoft Office 365 Pro Plus used in making graphs and Excel tables. Evaluations showed that the conventional technology used left many negative effects, like increase in None Productive Time NPT, cost and ground water pollution. Simultaneous Casing Drilling method proposed as an alternative method for the future campaign.
|
|
| 60. |
- Darwesh, Ali K., et al.
(författare)
-
Kicks controlling techniques efficiency in term of time
- 2017
-
Ingår i: Engineering. - : Scientific Research Publishing. - 1947-3931 .- 1947-394X. ; 9:5, s. 482-492
-
Tidskriftsartikel (refereegranskat)abstract
- Kicks are the result of under balance drilling operation. Time consumed to control the kicks will be different in depending on the controlling technique. Drilling fluid considered as a first barrier to control formation pressure and well kicks. Any advance in drilling fluids leads to more controlled operation in term of time. This paper will follow the general increasing profile of pressure before entering the reservoir. Both methods of well controlling technique; circulating techniques and non-circulating have been implemented in many oil blocks. The process of designing and casing selection, setting depth and many other issues is predominately dependent on the utilization of accurate values of formation pressure. Formation pressures used to design safe mud weights to overcome fracturing the formation and prevent well kicks. Hence the emphasis has been placed on the practical utilization of kicks pressure near the reservoir. The presented relationships will help the engineer to better understand lithological columns and reduce potential hole problems during the kick appearance. Selecting the best well controlling practical method can lead to not harming the reservoir and more production later. Changes in some drilling fluid properties have been proposed with increasing the depth without damaging the reservoir. Suggestions in relation to the casing setting point of the intermediate section are also proposed. Standard equations with proper modification for gases and safety margin have been proposed for the future drilling operation in oil fields above the reservoir.
|
|
