| 61. |
- Ahvenniemi, Esko, et al.
(författare)
-
Recommended reading list of early publications on atomic layer deposition-Outcome of the "Virtual Project on the History of ALD"
- 2017
-
Ingår i: Journal of Vacuum Science & Technology. A. Vacuum, Surfaces, and Films. - : American Vacuum Society. - 0734-2101 .- 1520-8559. ; 35:1
-
Forskningsöversikt (refereegranskat)abstract
- Atomic layer deposition (ALD), a gas-phase thin film deposition technique based on repeated, self-terminating gas-solid reactions, has become the method of choice in semiconductor manufacturing and many other technological areas for depositing thin conformal inorganic material layers for various applications. ALD has been discovered and developed independently, at least twice, under different names: atomic layer epitaxy (ALE) and molecular layering. ALE, dating back to 1974 in Finland, has been commonly known as the origin of ALD, while work done since the 1960s in the Soviet Union under the name "molecular layering" (and sometimes other names) has remained much less known. The virtual project on the history of ALD (VPHA) is a volunteer-based effort with open participation, set up to make the early days of ALD more transparent. In VPHA, started in July 2013, the target is to list, read and comment on all early ALD academic and patent literature up to 1986. VPHA has resulted in two essays and several presentations at international conferences. This paper, based on a poster presentation at the 16th International Conference on Atomic Layer Deposition in Dublin, Ireland, 2016, presents a recommended reading list of early ALD publications, created collectively by the VPHA participants through voting. The list contains 22 publications from Finland, Japan, Soviet Union, United Kingdom, and United States. Up to now, a balanced overview regarding the early history of ALD has been missing; the current list is an attempt to remedy this deficiency.
|
|
| 62. |
- Aid, Graham, et al.
(författare)
-
Looplocal - a heuristic visualization tool to support the strategic facilitation of industrial symbiosis
- 2015
-
Ingår i: Journal of Cleaner Production. - : Elsevier BV. - 0959-6526 .- 1879-1786. ; 98, s. 328-335
-
Tidskriftsartikel (refereegranskat)abstract
- Industrial symbiosis (IS) developments have been differentiated as self-organized, facilitated, and planned. This article introduces a tool, Looplocal, which has been built with objectives to support the strategic facilitation of IS. Looplocal is a visualization tool built to assist in 1) Simplifying the identification of regions susceptible to new industrial symbiosis facilitation activities 2) Enabling proactive and targeted marketing of potential exchanges to key actors in specific regions and 3) Assisting facilitators to assess the various strategies and consequential engagement and analysis methodologies suitable for additional IS development in specific regions. The tool compares industrial symbiosis data and estimated regional material and energy flows (on a facility level) to identify potential IS transfer information along with key stakeholder and network data. The authors have performed a proof of concept run of this tool on Sweden. In its early stages of application the method has given results seen as useful for identifying regions susceptible to the investment of symbiosis facilitators' time and resources. The material focus and customization possibilities for the tool show potential for a spectrum of potential facilitators: from waste management companies to national or regional authorities. In conjunction with long term business models, such a tool might be utilized throughout an adaptive chain of facilitation activities and aims.
|
|
| 63. |
-
Aided Communication in Everyday Interaction
- 2013
-
Samlingsverk (redaktörskap) (övrigt vetenskapligt/konstnärligt)abstract
- This book argues for the importance of the participants' perspective within both theory and practice on the function of augmentative and alternative communication (AAC) aids in everyday talk-in-interaction. Interactional approaches such as Conversation Analysis (CA) and Topical episode analysis are used to analyze and demonstrate the way participants make sense and display their understanding of AAC-mediated action. The book documents various practices and methods of the everyday use of AAC which can be applied clinically when establishing evidence-based assessment and intervention procedures. The book aims to bridge the gap between research and clinical practice, analyzes and explains the use of AAC aids, uses video recordings and transcriptions of naturally occurring, everyday talk-in-interacton, and demonstrates how the communicative context of the user's home is a powerful environment for learning and developing AAC use.
|
|
| 64. |
- Aiempanakit, Montri, et al.
(författare)
-
Effect of peak power in reactive high power impulse magnetron sputtering of titanium dioxide
- 2011
-
Ingår i: Surface & Coatings Technology. - : Elsevier BV. - 0257-8972 .- 1879-3347. ; 205:20, s. 4828-4831
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of peak power in a high power impulse magnetron sputtering (HiPIMS) reactive deposition of TiO(2) films has been studied with respect to the deposition rate and coating properties. With increasing peak power not only the ionization of the sputtered material increases but also their energy. In order to correlate the variation in the ion energy distributions with the film properties, the phase composition, density and optical properties of the films grown with different HiPIMS-parameters have been investigated and compared to a film grown using direct current magnetron sputtering (DCMS). All experiments were performed for constant average power and pulse on time (100W and 35 mu s, respectively), different peak powers were achieved by varying the frequency of pulsing. Ion energy distributions for Ti and O and its dependence on the process conditions have been studied. It was found that films with the highest density and highest refractive index were grown under moderate HiPIMS conditions (moderate peak powers) resulting in only a small loss in mass-deposition rate compared to DCMS. It was further found that TiO2 films with anatase and rutile phases can be grown at room temperature without substrate heating and without post-deposition annealing.
|
|
| 65. |
- Aiempanakit, Montri, et al.
(författare)
-
Hysteresis and process stability in reactive high power impulse magnetron sputtering of metal oxides
- 2011
-
Ingår i: Thin Solid Films. - : Elsevier BV. - 0040-6090 .- 1879-2731. ; 519:22, s. 7779-7784
-
Tidskriftsartikel (refereegranskat)abstract
- In the further development of reactive sputter deposition, strategies which allow for stabilization of the transition zone between the metallic and compound modes, elimination of the process hysteresis, and increase of the deposition rate, are of particular interest. In this study, the hysteresis behavior and the characteristics of the transition zone during reactive high power impulse magnetron sputtering (HiPIMS) of Al and Ce targets in an Ar-O(2) atmosphere as a function of the pulsing frequency and the pumping speed are investigated. Comparison with reactive direct current magnetron sputtering (DCMS) reveals that HiPIMS allows for elimination/suppression of the hysteresis and a smoother transition from the metallic to the compound sputtering mode. For the experimental conditions employed in the present study, optimum behavior with respect to the hysteresis width is obtained at frequency values between 2 and 4 kHz, while HiPIMS processes with values below or above this range resemble the DCMS behavior. Al-O films are deposited using both HiPIMS and DCMS. Analysis of the film properties shows that elimination/suppression of the hysteresis in HiPIMS facilitates the growth of stoichiometric and transparent Al(2)O(3) at relatively high deposition rates over a wider range of experimental conditions as compared to DCMS.
|
|
| 66. |
- Aiempanakit, Montri, 1977-, et al.
(författare)
-
Understanding the discharge current behavior in reactive high power impulse magnetron sputtering of oxides
- 2013
-
Ingår i: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 113:13, s. 133302-
-
Tidskriftsartikel (refereegranskat)abstract
- The discharge current behavior in reactive high power impulse magnetron sputtering (HiPIMS) of Ti-O and Al-O is investigated. It is found that for both metals, the discharge peak current significantly increases in the oxide mode in contrast to the behavior in reactive direct current magnetron sputtering where the discharge current increases for Al but decreases for Ti when oxygen is introduced. In order to investigate the increase in the discharge current in HiPIMS-mode, the ionic contribution of the discharge in the oxide and metal mode is measured using time-resolved mass spectrometry. The energy distributions and time evolution are investigated during the pulse-on time as well as in the post-discharge. In the oxide mode, the discharge is dominated by ionized oxygen, which has been preferentially sputtered from the target surface. The ionized oxygen determines the discharge behavior in reactive HiPIMS.
|
|
| 67. |
- Aijaz, Asim, et al.
(författare)
-
Synthesis of hydrogenated diamondlike carbon thin films using neon-acetylene based high power impulse magnetron sputtering discharges
- 2016
-
Ingår i: Journal of Vacuum Science & Technology. A. Vacuum, Surfaces, and Films. - : American Vacuum Society. - 0734-2101 .- 1520-8559. ; 34:6
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogenated diamondlike carbon (DLC:H) thin films exhibit many interesting properties that can be tailored by controlling the composition and energy of the vapor fluxes used for their synthesis. This control can be facilitated by high electron density and/or high electron temperature plasmas that allow one to effectively tune the gas and surface chemistry during film growth, as well as the degree of ionization of the film forming species. The authors have recently demonstrated by adding Ne in an Ar-C high power impulse magnetron sputtering (HiPIMS) discharge that electron temperatures can be effectively increased to substantially ionize C species [Aijaz et al., Diamond Relat. Mater. 23, 1 (2012)]. The authors also developed an Ar-C2H2 HiPIMS process in which the high electron densities provided by the HiPIMS operation mode enhance gas phase dissociation reactions enabling control of the plasma and growth chemistry [Aijaz et al., Diamond Relat. Mater. 44, 117 (2014)]. Seeking to further enhance electron temperature and thereby promote electron impact induced interactions, control plasma chemical reaction pathways, and tune the resulting film properties, in this work, the authors synthesize DLC: H thin films by admixing Ne in a HiPIMS based Ar/C2H2 discharge. The authors investigate the plasma properties and discharge characteristics by measuring electron energy distributions as well as by studying discharge current characteristics showing an electron temperature enhancement in C2H2 based discharges and the role of ionic contribution to the film growth. These discharge conditions allow for the growth of thick (>1 mu m) DLC: H thin films exhibiting low compressive stresses (similar to 0.5 GPa), high hardness (similar to 25 GPa), low H content (similar to 11%), and density in the order of 2.2 g/cm(3). The authors also show that film densification and change of mechanical properties are related to H removal by ion bombardment rather than subplantation.
|
|
| 68. |
- Aili, Daniel, 1977-, et al.
(författare)
-
Assembly of Polypeptide-Functionalized Gold Nanoparticles through a Heteroassociation- and Folding-Dependent Bridging
- 2008
-
Ingår i: Nano letters (Print). - : ACS Publications. - 1530-6984 .- 1530-6992. ; 8:8, s. 2473-2478
-
Tidskriftsartikel (refereegranskat)abstract
- Gold nanoparticles were functionalized with a synthetic polypeptide, de novo-designed to associate with a charge complementary linker polypeptide in a folding-dependent manner. A heterotrimeric complex that folds into two disulphide-linked four-helix bundles is formed when the linker polypeptide associates with two of the immobilized peptides. The heterotrimer forms in between separate particles and induces a rapid and extensive aggregation with a well-defined interparticle spacing. The aggregated particles are redispersed when the disulphide bridge in the linker polypeptide is reduced.
|
|
| 69. |
- Aili, Daniel, 1977-, et al.
(författare)
-
Colorimetric Protein Sensing by Controlled Assembly of Gold Nanoparticles Functionalized with Synthetic Receptors
- 2009
-
Ingår i: Small. - : Wiley. - 1613-6810 .- 1613-6829. ; 5:21, s. 2445-2452
-
Tidskriftsartikel (refereegranskat)abstract
- A novel strategy is described for the colorimetric sensing of proteins, based on polypeptide-functionalized gold nanoparticles. Recognition is accomplished using a polypeptide sensor scaffold designed to specifically bind to the model analyte, human carbonic anhydrase II (HCAII). The extent of particle aggregation, induced by the Zn2+-triggered dimerization and folding of a second polypeptide also present on the surface of the gold nanoparticle, gives a readily detectable colorimetric shift that is dependent on the concentration of the target protein. In the absence of HCAII, particle aggregation results in a major redshift of the plasmon peak, whereas analyte binding prevented the formation of dense aggregates, significantly reducing the magnitude of the redshift. The versatility of the technique is demonstrated using a second model system based on the recognition of a peptide sequence from the tobacco mosaic virus coat protein (TMVP) by a recombinant antibody fragment (Fab57P). Concentrations down to approximate to 10 nM and approximate to 25 nM are detected for HCAII and Fab57P, respectively. This strategy is proposed as a generic platform for robust and specific protein analysis that can be further developed to monitor a wide range of target proteins.
|
|
| 70. |
- Aili, Daniel, 1977-, et al.
(författare)
-
Folding Induced Assembly of Polypeptide Decorated Gold Nanoparticles
- 2008
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 130:17, s. 5780-5788
-
Tidskriftsartikel (refereegranskat)abstract
- Reversible assembly of gold nanoparticles controlled by the homodimerization and folding of an immobilized de novo designed synthetic polypeptide is described. In solution at neutral pH, the polypeptide folds into a helix-loop-helix four-helix bundle in the presence of zinc ions. When immobilized on gold nanoparticles, the addition of zinc ions induces dimerization and folding between peptide monomers located on separate particles, resulting in rapid particle aggregation. The particles can be completely redispersed by removal of the zinc ions from the peptide upon addition of EDTA. Calcium ions, which do not induce folding in solution, have no effect on the stability of the peptide decorated particles. The contribution from folding on particle assembly was further determined utilizing a reference peptide with the same primary sequence but containing both D and L amino acids. Particles functionalized with the reference peptide do not aggregate, as the peptides are unable to fold. The two peptides, linked to the nanoparticle surface via a cysteine residue located in the loop region, form submonolayers on planar gold with comparable properties regarding surface density, orientation, and ability to interact with zinc ions. These results demonstrate that nanoparticle assembly can be induced, controlled, and to some extent tuned, by exploiting specific molecular interactions involved in polypeptide folding.
|
|
